49” New Femco CNC Vertical Lathe Model VL-12

Fanuc OiT CNC Control
Detachable Manual Pulse Generator Handwheel
Automatic Slideway Lubrication System
8 Station Automatic Tool Changer
1 Year Standard Warranty
Installation & Training Included
2-Axis Simultaneous Movement
Hardened & Ground Ram
Coolant Supply & Recirculation System

Price On Request
F.O.B. Location
Terms: Check with Order

SKU: 5061 Category:

Description

The 49” New Femco CNC Vertical Lathe Model VL-12 has a Spindle Motor Driven Turn Table with a manual independent 4‑Jaw Chuck for chucking large workpieces. The Eight Station ATC Carrousel supports 8 heavy duty Tool Holders for I.D. and O.D. turning of large parts up to 62 inches in diameter. The rigid servo motor driven Ram allows for 42 inches of vertical Z-Axis turning. The Ram traverses 51 inches along the horizontal X-Axis supported by a robust adjustable Cross Rail.  The Cross Rail is sturdily supported by fixed double columns, and can be elevated or descended to a desired level above a part for maximum rigidity

49” New Femco CNC Vertical Lathe Model VL-12 Specifications:

Table Diameter 49.2″
Max. Swing 62.9″
Max. Turning Height 43.3″
Max. Work Piece Weight 10,000 Lbs
Max. Cutting Force 10,845 ft Lbs
Table Speed 2.8″ – 280 RPM (Stepless)
Ram Dimensions 8-5/8″ x 8-5/8″
Turning Tool Size 1-1/4″
Horizontal Travel (X Axis) 51″
Vertical Travel (Z Axis) 42″
X-Axis Rapid Traverse 394″/min
Z-Axis Rapid Traverse 394″/min
Cross Rail Elevation Speed 15.7″ IPM
Vertical Travel Rail 39.4″
Motor  
Main Table Drive  50/60 cont./30 min
Crossrail Elevation 5HP
Hydraulic  5HP
Lubrication of Turntable 0.37 HP
Lubrication of Slideway 0.1 HP
X-Axis Servo Motor 4.5 HP
Z-Axis Servo Motor 4.5 HP
Electric Power 120 AMP, 60 Hz, 3Phase
Weight of Machine 39,690 Lbs
Dimensions 146″ x 208″ x 206″

 

The Turn Table Drive consists of a 50 HP A.C. Spindle Motor with a gearbox, which provides 2 speed ranges (2.8 rpm ‑ 280 rpm).  The turntable sits on a Timken Tapered Roller Bearing.

The Tool Holders have an ISO #50 taper shanks and are similar to Bullard type Tool Holders. The ram has a #50 ISO taper receptacle with two hydraulically rotated cams to pull the shank tight.

Eight (8) Station ATC Carrousel supports 8 heavy duty Tool Holders that can be automatically and rapidly changed.  The carrousel type magazine is attached to the end of the Cross Rail.

The Rigid Surface Hardened and Ground Ram moves up and down via servomotor actuated ball nut against a fixed screw.  The 8 5/8” x 8 5/8” square sectioned ram slides inside Turcite lined narrow guide of the ram carriage.  This design allows easy boring of relatively small diameter but deep holes. 

The Horizontal Traverse of ram carriage is actuated by rotating ball screw with servomotor attached to the edge of the cross rail.

The Crossrail is made of boxed sectioned meehanite with sufficient rigidity against the weight of the ram and ram carriage and the thrust from machining.  The Cross Rail can be automatically elevated and descended to a desired height above a part then clamped tight against the double columns.  Leveling of the Cross Rail is achieved by having two precision ground 100 mm pitched hook up racks attached to the double columns.  The relative height level of these two racks can be manually adjusted when necessary.

The Double Columns which support the Cross Rail are fixed to the  bed (of the turntable) at the bottom ends and are linked to each other at the top ends. The cross rail is made of stress relieved Meehanite castings.

Both the Ram and the Ram Carriage (X-axis & Z-Axis) positions use Glass Digital Scale Feedback for optimum accuracy.   The Sheetmetal splashguard and coolant supply are standard equipment. 

All Axis Servo Motors and the Spindle Motor, Tool Changing and Crossrail Elevation etc. are all controlled with FANUC OiT Control having all push buttons and display provided on a pendant.  The pulse generator can be detached from the pendant so that an operator can take only the pulse generator with him when he has to reach close to or inside a workpiece when manual inching of cutting tool position is necessary.

There are two kinds of Lubrication supporting this machine. One is the continuous lubrication system for the gearbox of the rotating table and also for its bearing.  The other is the automatic interval lubrication system for all the slide ways.

49” New Femco CNC Vertical Lathe Model VL-12

STANDARD CONTROL FEATURES FANUC OiT:
  • Simultaneously Controllable Axes: 2
  • Minimum Programmable Increment:0. 0001
  • Program Storage Length (640m)
  • Registered Programs: 63
  • Backlash Compensation
  • Constant Surface Speed Control
  • Self Diagnostic Functions
PROGRAMMING FEATURES:
  • Background Editing
  • Tool Nose Radius Compensation (G70-42)
  • Combined Absolute/Incremental Commands
  • Inch / Metric Programming
  • Multiple Repetitive Cycles (G70-76)
  • Canned Cycles (G90, G92-G76)
  • Reference Point Return (G27-G30)
  • Sub Programming
OPERATION FEATURES:
  • High Resolution 8.4” Monochrome CRT
  • Geometry and Wear Offsets
  • 16 pairs of Tool Offsets
  • Run Hour Display
  • Thread Cutting Retract
  • Automatic Tool Offset Calculation
  • Direct Input of Offset Value Measured
  • Input / Output Interface (RS232C)
  • Machine Lock Key Switch
  • Incremental Offset
  • Rapid Traverse Override
  • Feed Rate Override
  • Spindle Speed Override
  • Manual Pulse Generator
  • Tape Code: EIA, ISO Automatic Recognition
  • Optional Block Skip
  • Canned Cycles for Turning
  • Mirror Image
  • Manual Continuous Feed
  • Dry Run
  • Single Block
  • Clock Function
STANDARD ACCESSORIES:
  • Coolant Supply and Recirculation System
  • 6 Tool Holders 
  • Automatic Slideway Lubrication System
  • Cross Rail Slideway Telescope Cover
  • 4 Jaw Manual Chuck (Mutually Independent)
  • Splash Guard
  • Glass Linear Scales (for X Axis and Z Axis) for Position Feed Back to Servo System.
  • Lamp
  • 1 Set of Hand Tools for Maintenance
  • FANUC OiT with Detachable Manual Pulse Generator
  • Bed Leveling and Fastening Parts
  • Necessary Operation and Maintenance Documentation 

49” New Femco CNC Vertical Lathe Model VL-12 MACHINE OPTIONS:

  • Additional Tool Holders… $5,000.00
    (preferable to be purchased with the machine so that each additional tool holder matches well with the ram).
  • ATC Carrousel 8 Tool Positions… Included
  • Chip Conveyor… $ 4,000.00

 

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/