10′ x 100 Ton Used Hydrapower Press Brake Model DH10-100

10′ x 100 Ton Used Hydrapower Press Brake Model DH10-100 for sale at Worldwide Machine Tool view specifications, features, options and photos below

Terms: Check with Order

SKU: 33405 Category: Tag:


10′ x 100 Ton Used Hydrapower Press Brake Model DH10-100 Specifications

Working Length 10′
Capacity 100 Ton
Standard Gap  
Open Height  
Table Height  
Dimension L x W x H  


  • Accuracy to within .001″ on overall length
  • Shut height adjustable while pressing
  • Tilt adjustment providing .050″/REV to +/- 1″
  • Tonnage control and indicator
  • Rigid deep section bed and ram
  • All steel, welded & interlocked construction
  • Side frames capable of full off center load
  • Complete overload protection
  • Non-metallic wear resistant slides with zero running clearance
  • Universal gauges
  • Four speed system; Fast approach/Slow pressing/Slow withdrawal/Fast return
  • Full tonnage through entire stroke
  • Die adjusting set screws
  • Centerline loading on side frames and tool centerline
  • Self-aligning clevis mounted cylinders with hard chrome piston rods
  • Pendant or Pedestal Controls (Customer Choice)
  • Portable footswitch control with safety guards
  • Automatic lubrication system

The precision leveling system is the simplest and most efficient ever to be used on press brakes. Like many of the notable brands we use the thin tape as the mechanical method of transmitting the out-of-parallel tendency of the ram but this is where the similarity ends. On other brands the control device attached to the end of the tape causes a valve on the hydraulic system to dump oil or impose a back pressure to bring about correction of the out-of-level condition. Both these actions waste horsepower which is converted directly to heat energy in the hydraulic oil.

The Leveling Sensor on the Hydrapower Press Brake mechanically amplifies the movement of the tape caused by any out-of parallel tendency. This magnified movement will actuate one of the two micro-switches (Advance or Retard) if the ram becomes out of parallel by as little as .0005. Contact with the limit switch now activates a miniature solenoid which decreases the volume to the slave circuit. The very small changes in displacement take place smoothly without impulses or shock to the hydraulic system. The leveling sensor needs no lubrication and has no wear-affected parts. The two micro-switches which are actuated by the leveling sensor are capable of millions of cycles and are accompanied by two “back up” units to ensure the system is fail safe even when the stager micro-switches malfunction due to age. Replacement of these units is readily accessible and simple to perform when the need should arise.

Robust Deep Section Bed and Ram
The bed and ram dimensions are designed to provide the maximum rigidity with a reasonable amount of weight. The depth of these members is the most important dimension. Some long bed models require a cavity in the floor to accommodate the bed but this can be avoided by substantially increasing the width of the bed with a resultant increase in weight for the same rigidity.

Extra Long Slides
To ensure longer life and greater accuracy the machines are equipped with very long slides. When the housings are being machined for the slides, a reference level surface is also machined at the same time to enable the slides to be accurately realigned when the press brake is being installed.

The slides require no lubrication and run with zero clearance to insure front to back precision within .001″.

Front Operated Back Gauges
To facilitate fast set ups, front operated back gauging may be added. For further convenience a push button, power driven back gauge is also available. Either form of these options includes a digital reading position indicator.

Portable Footswitch
The Portable Footswitch has anti-trip protection to prevent accidental actuation. The footswitch is attached to a reinforced flexible cable which is resistant to abrasion, oil and being crushed.

Note: When the foot switch is released, all downward motion will immediately cease.

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/