New Marvel Horizontal Band Saw Scissor Style Model PA10MPC Specifications:
|Round Cutting Capacity||10”|
|Rectangle Cutting Capacity||10” x 12”|
|Saw Blade Dimensions||1.25″ x .042” x 11’6″|
|Blade Tension||Hydraulically controlled tension (30,000 psi) provides consistent square cutting accuracy. Includes a motion detector that will shut the machine off should the blade break or stall.|
|Speed Range||70 – 330 feet per minute (21 – 101 meters per minute) variable through a frequency inverter drive and heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. A read out on the operator’s touch screen assures accurate speed setting.|
|Hydraulic Down Feed||Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.|
|Hydraulic Shuttle Feed||Length settings of 0 – 16” (0 – 406 mm) are displayed on a digital counter. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy. Repeatability is + .005 per index. Up to 400” (10.1 m) length is possible using the multi-index system.|
Blade Drive:5 H.P. (3.75 kW). Hydraulic Pump Motor:1 H.P. (.75 kW). Coolant Pump Motor: .125 H.P. (0.09 kW). Machines are available with 230-volt, 3 ph., 60 Hz.Electrics. All other voltages require a transformer sold separately.
|Operator’s Control Panel||Conveniently mounted on the left-hand side of the machine and offers full control of all machine functions such as; Vises, Blade Speed, Saw Frame, Bundle Clamping, Parts Counter, Shuttle Advance & Retract, Coolant and Work Light. (A standalone operator’s control console is available as an option).|
|MPC Programmable Control||Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to 100 jobs. Inputs include Part Length from 0 to 999” (0 – 25 m) (in inches up to 3 decimal places) and Number of Pieces to be cut. The Automatic Piece Counter stops each job when the pre-set number of cuts has been made. The control provides the option of running up to 20 parts in one job consecutively.|
|Out-of-Stock Switch||The machine will shut off automatically when material is no longer present in the rear vise.|
|Blade Guides||The combination roller bearing, and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of + .002 per inch (.051 mm) of cut material.|
|Fast Approach||Work height is automatically set allowing the head to rise just enough to clear the workpiece, reducing cycle time and allowing for faster cutting performance.|
|Automatic Chip Removal||The chip auger rotating in the coolant return removes chips quickly and efficiently, freeing the operator to perform more productive operations. Coolant is allowed to drain back to the tank before the chips are removed from the machine|
|Chip Brush||Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.|
|Full Stroking Hydraulic Vise Jaws||The front vise jaws are split to reduce the remnant to as little as 2.75” (70 mm). The split vise jaws also help to reduce burrs left on the material and are ideal for bundle cutting. Holding the workpiece|
|Work Light||Positioned directly over the work area to provide better illumination of the cutting area, the work light can be turned on and off independently from the operator’s control panel.|
|Variable Vise Pressure||Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material, allowing the piece to be held securely and without distortion.|
|Weight Capacity Machine Weight Table Height||2,134 lbs. 3,500 lbs. 27”|
New Marvel Horizontal Band Saw Scissor Style Model PA10MPC Options:
|Blade Amada SGLB||
Amada SGLB 4/6 Tooth Pitch (in addition to the start-up blade) additional year of parts warranty when you purchase 10 or more blades. Purchase 36 or more blades and receive additional year of parts warranty and up to 35% off parts discount (see blade club flyer for details).
|P10/G1 Hydraulic Hold Downs (P10SG1)||The nesting fixtures for vertical clamping are designed for high-production multiple cutting. Vertically mounted hydraulic clamps located on each vise jaw apply downward pressure to hold multiple bar work or structural shapes. Minimum Capacity: 2” H x 7” W (50 mm x 178 mm). Maximum Capacity: 6” H x 11” W (152 mm x 280 mm).||$1,980.00|
|FSCC Free Standing Control Console (PA13EA00436)||
Replaces standard control console mounted to machine base with a free-standing pedestal and 6’ (1.8 m) flexible electrical and hydraulic lines (Special Order & lead time factory build).
|PA10/F055 First Section Dead Roller Table||5’ (1.5 meter) long. Table is constructed from 4” x 5.4 lbs. (102 mm x 2.4 kg) Channel with five 2.5” (63 mm) diameter ball bearing rollers on 12” (305 mm) Centers. This is the first table required for either the loading or discharge side of the machine and is free standing||$850.00|
|PA10/X055 Extension Roller Table||5’ (1.5 meter) long. Table is constructed from 4” x 5.4 lb. (102 mm x 2.4 kg) Channel with five 2.5” (63 mm) diameter ball bearing rollers on 12” (305 mm) Centers. For use as extension to first section.||$680.00|
|PA10/X055 Coolant Pan||Fitting PA10/X055 & F055 roller conveyors, the coolant pan collects and returns coolant back to machine. Included is the pan, V-trough, and hangers||$380.00|
|PA13/ML2 Automatic Mist Lube||Drop Lubrication system. (Requires compressed air connection)||$2,460.00|
|CL2210 Unist Coolube 2210||Unist Coolube 2210 is the cutting oil and lubricant that is shipped within your ML2 (Mist drop lubrication system). It is formulated as a metal cutting oil and lubricant for metals, wood, rubber, and most plastics. It is 100% natural, non-toxic, non-staining, and will not oxidize (become sticky or leave a residue). Coolube 2210 cutting fluid does not contain any ingredients currently recognized as hazardous by OSHA, IARC or NIP. Coolube 2210 machining oil will never cause dermatitis and is formulated from cosmetic grade raw materials, which makes it entirely worker and environmentally safe. Coolube 2210 is a USDA certified bio-based product.||$110.00|
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/