Description
This is a simple, easy to use 3-axis CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. The 3 axis Digital Readout System are installed on the table, saddle and quill. The Millpwr G2 CNC has G code and conversational type programming. The CNC system is built on the top quality SHARP vertical mills frame.
10″ x 50″ New Sharp CNC Knee Mill Model TMV/MP-3 Specifications:
| CAPACITY | |
|---|---|
| Table Size | 10x 50 in. |
| T-Slots (No., Size, Pitch) | 3, 5/8, 2.5 in. |
| Tabel Travel: X Longitudinal | 31 in. |
| Table Travel: Y Cross | 15.5 in. |
| Quill Travel: Z Vertical | 5 in. |
| Ram Travel | 18.5 in. |
| Knee Travel: Vertical | 15.3 in. |
| Spindle Center to Column | 9.8 – 28.3 |
| Spindle Nose to Table Top | 1.6 – 16.9 in. |
| HEAD, SPINDLE | |
| Spindle Nose Taper | R-8 |
| Spindle Variable Speed Range | 60 -4500 rpm |
| Spindle Motor (220V/440V) | 3 HP |
| Quill Feed (Inch/Rev) (3 speeds) | 0.0015, 0.003, 0.006 in. |
| Head Tilt Angle (L/R) | 90° |
| Head Tilt Angle (Up/Down) | 45° |
| GENERAL | |
| Floor Area (W x D x H) | 7.08 x 6.66 x 7.5 ft. |
| Approximate Weight | 3,500 lbs. |
| Power Consumption (220V) | 3 KVA/15 amps |
| Power Consumption (440V) | 3 KVA/7.5 amps |
All Specifications subject to change without notice. Please call to verify
10″ x 50″ New Sharp CNC Knee Mill Model TMV/MP-3Features:
- Acu-Rite Millpwr G2 CNC Control
- Servo Drive System (3 Axes) (Table, Saddle, Quill)
- DRO System (3 Axes) (Table, Saddle, Quill)
- Ballscrews (3 Axes) (Table, Saddle, Quill)
- Dual Cooling Fans
- Hard Chromed Ways (LMV, LMV-49-DVS, LMV-50)
- Hardened and Ground Box Ways (TMV, TMV-1)
- Turcite Coated Saddle Ways
- Meehanite Castings
- Roller Bearing Support Bottom of Motor Shaft
- ABEC-7 Super Precision Angular Contact Bearings
Standard Equipment:
- Complete Acu-Rite Millpwr G2 CNC System
- Auto Lube System
- Front and Rear Way Covers
- 220V or 440V Please Specify
- DVS Head for 440V Needs Transformer
- Models with DVS Head 220V Works on Single Phase Power
Acu-Rite Millpwr G2 CNC Control Features:
- Run Options: Single Step, Dry Run, Graphics Only, Manual Positioning
- Calculator Functions: Geometry, Trig, Standard, RPM
- Operator Console: 10″ Flat Panel, Color LCD Display Conversational English, 3 Dimensional Hard Keys, Remote Stop/Go Switch
- Controller Cabinet: Heavy Duty Enclosure Modular Construction. 1 GHz Intel Celeron Microprocessor 12.1″ High Resolution Display with 3-D Graphics, USB, RS232 Interface, 115Vac, 20 Amp
- Positioning: Precision Linear Glass Scales, Closed Loop Feedback System
10″ x 50″ New Sharp CNC Knee Mill Model TMV/MP-3 Options:
| PART NO. | DESCRIPTION | PRICE |
| 440T4 | 380V, 440V, 575V Transformer – 3 HP (FOR DVS ONLY) | $910 |
| AR-LMV-MP21 | Acu-Rite DRO System on Knee (For LMV & LMV-50) | $2,490 |
| AR-TMV-M-21 | Acu-Rite DRO System on Knee for TMV & TMV-1 | $2,490 |
| Factory Installation – DRO System | $450 | |
| Factory Installation – DRO System | $500 | |
| 5000-2126A | 6″ “Kurt” Vise with Swivel Base D688 | $1,470 |
| LMV-D/A | Drill & Arbors for LMV & LMV-50 | $560 |
| TMA-D/A | Drill and Arbors for TMV | $560 |
| TMV-1-D/A | Drill Chuck and Arbor for TMV-1 | $560 |
| C311-LMV | Coolant System with Chip Pan for LMV & LMV-50 | $970 |
| C311-TMV | Coolant System with Chip Pan for TMV | $970 |
| C311-TMV-1 | Coolant System with Chip Pan for TMV-1 | $970 |
| TR-100 | “Maxi Torque Rite” Power Draw Bar | $1,040 |
| Factory Installation – Power Draw Bar (MaxiTorque) | $365 | |
| SP-250D | Sharp Power Knee Feed | $925 |
| Factory Installation – Power Knee Feed | $600 | |
| ACC-06 | Riser Block 6″ | $1,250 |
| Factory Installation – Riser Blocks 6″ | $340 | |
| ACC-R8 | R-8 Collet (Set of 11) – 1/8″ – 3/4″ by 1/16″ (Except TMV-1) | $280 |
| CK-104 | Clamping Kit (52 pcs/steel rack) | $270 |
| WL-110V55W | Halogen Worklight | $280 |
All prices and specifications subject to change without notice. Please call to verify.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
