10″ x 54″ New Clausing Knee Mill Model 3VS30/1

Price On Request
F.O.B. Factory
Terms: Check with order

Options

DRO Kits

Description

10″ x 54″ New Clausing Knee Mill Model 3VS30/1 Specifications:

Table & Ways  
Table size 10″ x 54″
No. of T-slots 3
T-slot width 5/8″
T-slot center distance 2.48″
Table ways Dovetail
Knee ways Square
Column ways Dovetail
Travels  
X longitudinal 39.56″
Y cross 15.55″
Z knee 15.55″
Ram 22.04″
Motors & Spindle  
Spindle motor R8 & 30 / 40 taper 3 Hp/5 Hp
Amp. Draw 208v: 7
Amp. Draw 230v: 7
Amp. Draw 460v: 5
Variable spindle speed rpm Low range: 75-780
High range: 515-4350
Main spindle taper R8 or NMTB30 or NMTB40
Spindle travel 5″
Quill feed (in/rev.) 0.0015/0.0031/0.006
Quill diameter 3.38″
Construction & Weight  
Column turret diameter 14.96″
Knee width 11.42″
Column bearing length 17.91″
Saddle/table bearing length 20.28″
Ram/turret bearing length 17.32″
Ram length 41.73″
Table load 880 lbs.
Net weight 2,985 lbs.
Height 88″
Depth 71″
Width 76″
Table to spindle  3.94″ – 19.01″
45º inward 1.57″ – 16.53″
Spindle ǿ to column 9.45″ – 29.92″
45º outward 12.20″ – 27.16″
Head tilt 90º right & left

 

10″ x 54″ New Clausing Knee Mill Model 3VS30/1 Standard Equipment:

  • Meehanite castings for superior rigidity and wear resistance
  • Hardened & ground, X, Y & Z ways
  • X/Y ways coated with Turcite B
  • Column & knee ways covers
  • T-slots are ground to provide reference edge for positioning your workplace
  • Hardened & ground table surface
  • Hardened & ground spindle
  • Chromed & ground quill
  • Chromed X, Y, & Z leadscrews
  • Double nut leadscrew for backlash compensation
  • ABEC 7/CP4 spindle bearings
  • Coolant system w/pump & switch
  • Flexible segmented coolant nozzle
  • Chromed Y screw covers and one-piece wipers
  • 7/16”-20 Imperial drawbar R8, or 1/2”-20 Imperial drawbar NMTB30, 5/8″-11 Imperial drawbar NMTB40
  • 3 Hp AC motor, 40 taper is 5 Hp AC motor
  • Variable speed drive
  • Articulating head for compound angles
  • Worm gear angular positioning of head in two directions
  • Lever-operated manual rapid quill movement
  • Handwheel for fine quill feed
  • Adjustable automatic feed disengagement for quill feed
  • Micrometer depth stop
  • Reversing switch for clockwise or counter clockwise operation
  • R8 or NMTB 30 or NMTB 40 spindle
  • Spindle brake (hand operated)
  • One-shot lubrication
  • Leveling bolts and pads
  • Tool kit, test and accuracy chart
  • Operations manual/parts list
  • 3VS series standard 208/230 or 460 3 phase (other voltages require a transformer or special order)
  • 3EVS series standard 230 volt 3 phase (other voltages require a transformer or special order)

 

10″ x 54″ New Clausing Knee Mill Model 3VS30/1 Optional Accessories:

R8 Spindle Accessories Only  
2VS020  R8 Milling Chuck Kit w/7 Collets $710.00
3VS030P  Horiz. Milling Attachment 3pc. Set (cannot use with power drawbar option) $1,220.00
3VS031P  R8 Rt. Angle Attachment (cannot use with power drawbar option) $770.00
Z384-SET-1  R8 Metric Set 2mm by 1mm, 19 Collets $365.00
Z384-SET-5  R8 Inch Collet Set 1/8 to 7/8 by 32nds, 25 Collets $1,030.00
Z384-SET-6  R8 Inch Collet Set 1/8 to 7/8 by 1/16ths, 13 Collets $275.00
Z384-SET-7  R8 Inch Collet Set 1/8 to ¾ by 1/8ths, 6 Collets $150.00
FV-9031G  R8 to J2 Arbor for FV-9030G $170.00
FV-9033G  R8 to J6 Arbor for FV-9032G $170.00
FV-9041G  12pc. R8 Collet Rack $45.00
FV9050G  ½” R8 Shell Mill Holder $100.00
FV-9051G  ¾” R8 Shell Mill Holder $100.00
FV-9052G  1” R8 Shell Mill Holder $100.00
FV-9080G  R8 End Mill Adapter Set 3/16-1 ¼ (8 pcs.) $320.00
2VS8408  Air Power Draw Bar R8 (US MFG) (installed) $1,300.00
NMTB30 Spindle Accessories Only  
2VS021  NMTB30 Milling Chuck Kit w/7 Collets $710.00
3VS030AP  NMTB30 Horiz. Milling Attachment 3pc. Set (cannot use with power drawbar option) $1,220.00
3VS031AP  NMTB30 Rt. Angle Attachment (cannot use with power drawbar option) $770.00
FV-9081G  NMTB30 End Mill Adapter Set 3/16 – 1 (7 pcs) $740.00
2VS8430  Air Power Draw Bar NMTB30 (US MFG) (installed) $1,300.00
NMTB40 Spindle Accessories Only  
2VS022  NMTB40 Milling Chuck Kit w/7 Collets $710.00
4VS030BP  NMTB40 Horiz. Milling Attachment 3pc. Set (cannot use with power drawbar option) $1,380.00
4VS031BP  NMTB40 Rt. Angle Attachment (cannot use with power drawbar option) $965.00
4VSQ40A  Power Draw Bar – Auto 4VSQ (Taiwan) $1,505.00
2VS8440  Air Power Draw Bar (US MFG) (installed) $1,365.00
All Accessories  
3VS001P  Chip Tray $665.00
3VS-RSG  Rear Splash Guard Sides of Column $1,240.00
2VS002  Full Electrics w/Disconnect Box & CNTL Box (factory) $1,055.00
2VS002F  Full Electrics w/Disconnect Box & CNL Box (field or stock machines) $1,505.00
2VS002A  Central 110v Wiring Point w/6 Plugs & 8’ Power Cord $265.00
2VS010  52 Piece Clamping Kit $195.00
2VS020A  ¼” Milling Chuck Collet Only (2VS020, 21, 22) $50.00
2VS020B  5/16” Milling Chuck Collet Only (2VS020, 21, 22) $50.00
2VS020C  3/8” Milling Chuck Collet Only (2VS020, 21, 22) $50.00
2VS020D  ½” Milling Chuck Collet Only (2VS020, 21, 22) $50.00
2VS020E  5/8” Milling Chuck Collet Only (2VS020, 21, 22) $50.00
2VS020F  ¾” Milling Chuck Collet Only (2VS020, 21, 22) $50.00
2VS020G  1” Milling Chuck Collet Only (2VS020, 21, 22) $50.00
2VS040P  4” Riser Block $605.00
2VS041P  6” Riser Block $690.00
2VS042P  8” Riser Block $760.00
3VS045  X,Y Ball Screws In Lieu of Lead Screws (factory installed) $2,265.00
3VS045F  X,Y Ball Screws I/O Lead Screws (field or stock install) $3,860.00
2VS050  Auto Lube Pump 110V $370.00
2VSX150  X-Axis Servo Feed (USA MFG) $1,415.00
2VSXA  X-Axis Align Power Feed (Taiwan) $1,040.00
2VSY150  Y Axis Servo Feed (USA MFG) (cannot be used with ballscrew option) $1,740.00
2VSYA  Y Axis Align Power (Taiwan) (cannot be used with ballscrew option) $1,075.00
2VSK140  Knee Servo Feed (USA MFG) $1,580.00
2VSKA  Knee Align Power (Taiwan) $1,075.00
FV-9010G  Kurt 6” Vise Only $775.00
FV-9011G  Kurt 6” Swivel Base for FV-9010G $525.00
FV-9012G  Vise Step Key Kit 11/16 x 5/8 (set of 2) $105.00
FV-9030G  ½” Keyless Drill Chuck $230.00
FV-9032G  1/8” to 5/8” Keyless Drill Chuck $240.00
FV-9070L  LED Work Light w/3Pin 110V Plug $265.00
CS-9062  Coolant Mist System 1 Gal $1,020.00
3VS-CE  CE Electrics w/ Spindle Guard (factory order) $1,245.00
3VS-CSA  CSA Electrics Canadian Specifications (non-certified) $560.00
3VS-BRKM  Braking Motor In Lieu of Standard Motor (factory inst) $370.00
3VS-5HP  5Hp motor in lieu of 3Hp (factory installed 3VS series) $140.00
3VS-5HPF  5Hp Motor in Lieu of 3Hp (field or stock 3VS series) $1,000.00
3EVS-5HP  5Hp motor in lieu of 3Hp (factory installed 3EVS series) $710.00
3EVS-5HPF  5Hp Motor in Lieu of 3Hp (field or stock 3EVS series) $3,680.00
DRO Kits  
AR16-40-100M  3VS 2 Axis 10” x 54” TBL Acu-Rite 100 DRO (installed) $2,050.00
AR16-40-200M  3VS 2 Axis 10”x 54” TBL Acu-Rite 200 DRO (installed) $2,395.00
AR16-40-300M  3VS 2 Axis 10” x 54” TBL Acu-Rite 300 DRO (installed) $2,795.00
AR4-16-40-200M  3VS 3 Axis w/Spindle 10”x 54” TBL Acu-Rite 200 DRO (installed) $3,045.00
AR4-16-40-300M  3VS 3 Axis w/Spindle 10”x 54” TBL Acu-Rite 300 DRO (installed) $3,445.00
AR16-40-16200M  3VS 3 Axis w/Knee 10”x 54” TBL Acu-Rite 200 DRO (installed) $3,240.00
AR16-40-16300M  3VS 3 Axis w/Knee 10”x 54” TBL Acu-Rite 300 DRO (installed) $3,640.00
AR4-16-40-16300M  3VS 4 Axis w/Knee 10”x 54” TBL Acu-Rite 300 DRO (installed) $4,315.00
NW16-40-DP700  3VS 2 Axis 10”x 54” TBL Newall DRO (installed) $2,365.00
NW6-16-40-DP700  3VS 3 Axis w/Spindle 10”x 54” TBL Newall DRO (installed) $3,140.00
NW16-16-40-DP700  3VS 3 Axis w/Knee 10”x 54” TBL Newall DRO (installed) $3,140.00
FG16-40-PKMC  3VS 2 Axis 10”x 54” TBL Fagor DRO 40i (installed) $2,795.00
FG16-40-PKM  3VS 2 Axis 10”x 54” TBL Fagor LED DRO 20i (installed) $2,395.00
FG06-16-40-PKMC  3VS 3 Axis w/Spindle 10”x 54” TBL Fagor DRO 40i (installed) $3,445.00
FG06-16-40-PKM  3VS 3 Axis w/Spdl 10”x 54” TBL Fagor LED DRO 30i (installed) $3,045.00
FG16-16-40-PKMC  3VS 3 Axis w/Knee 10”x 54” TBL Fagor DRO 40i (installed) $3,640.00
FG16-16-40-PKM  3VS 3 Axis w/Knee 10”x 54” TBL Fagor LED DRO 30i (installed) $3,240.00

 

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/