Description
The New Sharp Vertical Knee Mill Model TMV-K-N package is the same as Model TMV, plus Digital Variable Speed, Power Feed Table, 3 axes digital readout and power drawbar.
10″ x 54″ New Sharp Vertical Knee Mill Model TMV-K-N Specifications:
| CAPACITY | |
| Table Size | 10 x 54 in. |
| T-Slots (No., Size, Pitch) | 3, 5/8, 2.5 in |
| Table Travel: X Longitudinal | 39 in. |
| Tabe Travel: Y Cross | 16.3 |
| Quill Travel: Z Vertical | 5 in. |
| Ram Travel | 18.5 in. |
| Knee Travel: Vertical | 15.3 in. |
| Spindle Center to Column | 9.8 – 28.3 in. |
| Spindle Nose to Table Top | 5.375 x 16.9 in. |
| HEAD, SPINDLE | |
| Spindle Nose Taper | R-8 |
| Spindle Variable Speed Range | 60-4500 rpm |
| Spindle Motor (220V/440V) | 3 HP |
| Quill Feed (Inch/Min) (3 speeds) | .0015, .003, .006 in. |
| Quill Diameter | 3.375 in. |
| Head Tilt Angle (L/R) | 90° |
| Head Tilt Angle (Up/Down) | 45° |
| GENERAL | |
| Floor Area (w x d x h) |
9.83 x 6.25 x 7.64 ft. |
| Approximate Weight | 3,000 lbs |
| Power Consumption (220V) | 3 KVA/8 amps |
| Power Consumption (440V) | 3 KVA/4 amps |
10″ x 54″ New Sharp Vertical Knee Mill Model TMV-K-N Standard Equipment:
- One shot lubrication system
- Hard-Chromed Ways
- Front and Rear Rubber Way Covers
- Tool Box with Tools
- Wired 220V or 440V
10″ x 54″ New Sharp Vertical Knee Mill Model TMV-K-N Features:
- 3 HP motor R-8 spindle
- Hardened & ground box ways on column and saddle
- Variable speed drive (60-4500 rpm)
- Digital variable speed (60-4500 rpm) (Model TMV-DVS)
- Dual cooling fans for TMV, single fan for TMV-DVS
- Meehanite castings
- Self-lube motor shaft
- Super precision spindle bearings
- Turcite Coated saddle ways
10″ x 54″ New Sharp Vertical Knee Mill Model TMV-K-N Optional Accessories:
| PART # | DESCRIPTION | PRICE |
| 440T4 | 380V, 440V,575V Transformer – 3 HP (for DVS head only) | $910 |
| AUTOLUBE-2 | Auto Lube Pump w/2 Adjustments (Installed) | $970 |
| SP-250A | “Sharp” Power Table Feed with Safety Handle (X Axis) | $925 |
| SP-250B | “Sharp” Power Crossfeed with Safety Handle IY Axis) | $925 |
| SP-250D | “Sharp” Power Kneefeed | $925 |
| Factory Installation – Table Feed (SP-250A) | $335 | |
| Factory Installation – Crossfeed (SP-250B) | $450 | |
| Factory Installation – Knee feed (SP-250D) | $600 | |
| 5000-2126A | 6″ “Kurt” Vise with Swivel Base D688 | $1,470 |
| ACC-10TMV-R8 | Right Angle Milling Attachment with Arbor for R-8 Taper (TMV) | $2,270 |
| ACC-10TMV-K-R8 | Right Angle Milling Attachment with Arbor for R-8 Taper (TMV-K) | $2,270 |
| TMV-D/A | Drill & Arbors | $560 |
| ACC-06 | Riser Block 6″ | $1,250 |
| Factory Installation – Riser Block | $360 | |
| TR-100 | “Maxi Torque Rite” Power Drawbar | $1,040 |
| Factory Installation – Power Drawbar (Maxi-Torque) | $365 | |
| YC-180 | Coolant Pump for TMV/TMV-1 | $488 |
| C311/TMV | Coolant System with Chip Pan for TMV/TMVDVS/TMV-1 | $970 |
| ACC-R8 | R-8 Collet (Set of 11) – 1/8″ – 3/4″ by 1/16″ | $280 |
| CK-104 | Calming Kit (52 pcs/steel rack) | $280 |
| WL-110V55W-L | Halogen Worklight | $280 |
| CE Mark (Order with Machine) | $1,735 | |
| UL, CSA, CU Compliance (Order with Machine) | P.O.R |
Digital Readout Systems:
| Fagor DRO | ||
| FG-TMV | TMV/TMV-1 (20i) 2 Axes | $2,020 |
| FG TMV-3AQ | TMV/TMV-1 (30i) 3 Axes on Quill | $3,150 |
| FG-TMV-3AK | TMV/TMV-1 (30i) 3 Axes on Knee | $3,360 |
| Acu-Rite 2035 DRO | ||
| AR-TMV | TMV/TMV-1 2 Axes | $3,425 |
| AR-TMV-3AQ | TMV/TMV-1 3 Axes on Quill | $3,820 |
| AR-TMV-3AK | TMV/TMV-1 3-Axes on Knee | $4,520 |
| Newall NMS-800 DRO | ||
| NWN-TMV | TMV/TMV-1 2 Axes | $2,170 |
| NWN-TMV-3AQ | TMV/TMV-1 3 Axes on Quill | $2,995 |
| NWN-TMV-3AK | TMV/TMV/-1 3 Axes on Knee | $2,995 |
| Factory Installation – DRO | ||
| 2 Axes DRO | $810 | |
| 3 Axes DRO | $1,000 |
10″ x 54″ New Sharp Vertical Knee Mill Model TMV-K-N Features, Functions & Benefits:
- ISO 9002 certified: Quality up to world industry standards.
- MEEHANITE casting: Highest grade of casting possible.
- A pair of high out-put fans: Keep head and 3 HP motor cool, to run jobs for extended periods without damaging the motor, belts, and bearing.
- A pair of precision ABEC-7 angular contact bearings to support spindle: The quill is ground and chromed to fit the housing. This ensures a spindle run out of .0002″ TIR.
- Motor shaft and vari-drive pulleys are dynamically balanced, then chromed for a flawless fit, ground ribs on the inside diameter: For smooth speed changes.
- Motor shaft has an oil channel in the center that is fed by a grease fitting on the lower end: To keep vari-drive pulley moving smoothly on the shaft.
- The mill uses a roller bearing for the lower support of the shaft: This ensures proper loading, support and alignment. It also prevents the shaft from being distorted by the tension of the belt; for quiet, accurate operation at any speed for years and years.
- One shot lubrication system: For lubrication of ways and lead screws (X, Y and Z axes).
- Hand scraped saddle and knee: For better oil retention; it avoids having chips and dirt embedded in the knee and damage the sliding surface.
- Oil groove are milled: For maximum lubrication on all wear areas.
- Table and saddle backlash is controlled by double nut design: Keeps lead screw in contact with bronze nuts at all times to keep backlash at .0008″ within 20″.
- Table and saddle are mounted with thrust bearings that are pre-loaded: Eliminating end play for precisely controlled lateral movement.
- Patented knuckle design uses 6 T-Bolts, 3 per side, securing them from the outside: This method locks the head securely, resulting in better accuracy and performance.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
