Description
10″ x 54″ New Sharp Vertical Mill Model TMV-I Specifications:
| CAPACITY | |
| Table Size | 10 x 54 in. |
| T-slots (No., Size, Pitch) | 3, 5/8, 2.5 in. |
| Table Travel: X Longitudinal | 39 in. |
| Table Travel: Y Cross | 16.3 in. |
| Quill Travel: Z Vertical | 5 in. |
| Ram Travel | 18.5 in. |
| Knee Travel: Vertical | 15.3 in. |
| Spindle Center to Column | 9.8 – 28.3 in. |
| Spindle Nose to tAble Top | 5.375 – 16.9 in. |
| HEAD, SPINDLE | |
| Spindle Nose Taper | NT-40 |
| Spindle Variable Speed Range | 60-4500 rpm |
| Spindle Motor (220V/440V) | 5 HP |
| Quill Feed (Inch/Rev) (3 speeds) | .0015, .003, .006 in. |
| Quill Diameter | 4.2 in. |
| Head Swivel Angle | 360° |
| Head Tilt Angle (L/R) | 90° |
| Head Tilt Angle (Up/Down) | 45° |
| GENERAL | |
| Floor Area (W x D x H) | 9.83 x 6.25 x 7.64 ft. |
| Approximate Weight | 3,300 lbs. |
| Power Consumption (220V) | 3 KVA/8 amps |
| Power Consumption (440V) | 3 KVA/4 amps |
10″ x 54″ New Sharp Vertical Mill Model TMV-I Standard Equipment:
- One Shot Lube System
- Hard-Chromed Ways
- Front and Rear Rubber Way Covers
- Tool Box with Tools
- Wired 220V or 440V
Features:
- 5HP motor
- Variable Speed Drive (60-4500 rpm)
- NT#40 Spiindle
- Hardened & Ground Box Ways on Column and Saddle
- Dual Cooling Fans
- Meehanite Casting
- Self-Lubricating Motor Shaft Extends Pulley Life
- ABEC-7 Super Precision Spindle Bearings
- Turcite Coated Saddle Ways
- Unique Double Nut Backlash System
Optional Accessories:
| PART # | DESCRIPTION | PRICE |
| 440T4 | 380V, 440V, 575V Transformer – 3 HP (For DVS Only) | $910 |
| AUTOLUBE2-220V | Auto Lube Pump w/2 Adjustments (Installed) | $970 |
| SP250A | “Sharp” Power Table Feed with Safety Handle (X Axis) | $925 |
| SP250B | “Sharp” Power Cross Feed with Safety Handle (Y Axis) | $925 |
| SP250D | “Sharp” Power Knee Feed | $925 |
| Factory Installation – Table Feed (SP-259A) | $355 | |
| Factory Installation – Cross Feed (SP-250B) | $450 | |
| Factory Installation – Knee Feed (SP-250D) | $600 | |
| 5000-2126A | 6″ “Kurt” Vise with swivel Base D688 | $1,470 |
| TMV-D/A | Drill & Arbors | $560 |
| ACC-06 | Riser Block 6″ | $1,250 |
| Factory Installation – Riser Block | $350 | |
| TR-100 | “Maxi Torque Rite” Power Draw Bar | $1,040 |
| Factory Installation – Power Draw Bar (Maxi-Torque) | $365 | |
| C311-TMV | Coolant System with Chip Pan for TMV/TMV-1 | $970 |
| YC-180 | Coolant Pump for TMV/TMV-1 | $488 |
| CK-104 | Clamping Kit (52 pcs/steel rack) | $270 |
| WL-110V55W-L | Halogen Worklight | $280 |
| UL, CSA, CU Compliance (Order with Machine) | POR | |
| FAGOR DRO | ||
| FG-TMV | TMV/TMV-1 (20i) 2 Axes | $2,020 |
| FG-TMV-3AQ | TMV/TMV-1 (30i) 3 Axes on Quill | $3,150 |
| FG-TMV-3AK | TMV/TMV-1 (30i) 3 Axes on Knee | $3,360 |
| ACCU-RITE 203S DRO | ||
| AR-TMV | TMV/TMV-1 2 Axes | $3,425 |
| AR-TMV-3AQ | TMV/TMV-1 3 Axes on Quill | $3,820 |
| AR-TMV-3AK | TMV/TMV-1 3 Axes on Knee | $4,520 |
| NEWALL NMS-800 DRO | ||
| NWN-TMV | TMV/TMV-1 2 Axes | $2,170 |
| NWN-TMV-3AQ | TMV/TMV-1 3 Axes | $2,995 |
| NWN-TMV-3AK | TMV/TMV-1 3 Axes | $2,995 |
| Factory Installation – 2 Axes DRO | $810 | |
| Factory Installation – 3 Axes DRO | $1,000 |
Features, Functions & Benefits:
- ISO 9002 certified: Quality up to world industry standards.
- MEEHANITE casting: Highest grade of casting possible.
- A pair of high out-put fans: Keep head and 5HP motor cool, to run jobs for extended periods without damaging the motor, belts, and bearing.
- A pair of precision ABEC-7 angular contact bearings to support spindle: The quill is ground and chromed to fit the housing. This ensures a spindle run out of .0002″ TIR.
- Motor shaft and vari-drive pulleys are dynamically balanced, then chromed for a flawless fit, ground ribs on the inside diameter: For smooth speed changes.
- Motor shaft has an oil channel in the center that is fed by a grease fitting on the lower end: To keep vari-drive pulley moving smoothly on the shaft.
- The mill uses a roller bearing for the lower support of the shaft: This ensures proper loading, support and alignment. It also prevents the shaft from being distorted by the tension of the belt; for quiet, accurate operation at any speed for years and years.
- One shot lubrication system: For lubrication of ways and lead screws (X, Y and Z axes).
- Hand scraped saddle and knee: For better oil retention; it avoids having chips and dirt embedded in the knee and damage the sliding surface.
- Oil groove are milled: For maximum lubrication on all wear areas.
- Table and saddle backlash is controlled by double nut design: Keeps lead screw in contact with bronze nuts at all times to keep backlash at .0008″ within 20″.
- Table and saddle are mounted with thrust bearings that are pre-loaded: Eliminating end play for precisely controlled lateral movement.
- Patented knuckle design uses 6 T-Bolts, 3 per side, securing them from the outside: This method locks the head securely, resulting in better accuracy and performance.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
