Description
10″ x 55.25″ New Republic Lagun Vertical Mill Model FTV-2FE
the FTV-2FE Vertical Knee Mill with EVS, now available as either Metric or Imperial. We’ve revamped our bestselling FTV2F vertical knee mill from the inside out, with a full EVS conversation, and an all new look.
Equipped with an ultra-powerful, and rigid Electronic Variable Speed (EVS) head that reaches full horsepower at 356 RPM, this brawny milling head produces 74 ft/lbs. (10kgm) of torque. We’ve specially designed these heads with a 2:1 gear ratio from the motor to the spindle. This gear ratio lowers motor speed while increasing torque, allowing it to reach high RPM’s.
Additionally, like our classic FTV-2F, this vertical knee mill comes equipped with induction hardened and ground ways. We’ve also included square ways for rigidity and dovetail ways for accuracy on the knee.
The FTV-2FE’s combination of a 5hp Baldor motor with a heavy duty Yakasawa drive allows it to achieve low-end torque. When combined with a 2:1 gear ratio you have a machine with precision control, less wear on its motor & bearings, more torque at higher RPM’s, and a longer lifespan.
10″ x 55.25″ New Republic Lagun Vertical Mill Model FTV-2FE Specifications:
|
TABLE SIZE |
55” X 10” (1,403 X 254 MM) |
|
T-SLOTS |
3 ON 2.51” CENTERS (3 ON 64 MM) |
|
T-SLOT SIZE |
0.63” (16 MM) |
|
MAXIMUM WEIGHT ON TABLE |
750 LBS (340 KGS) EVENLY DISTRIBUTED |
|
MAIN MOTOR |
5 HP (3.72 KW) |
|
ELECTRONIC VARIABLE SPEED |
55 TO 4,250 RPM LOW (55 TO 490 RPM) HIGH (490 TO 4,250 RPM) |
|
HEAD SWIVEL (LEFT TO RIGHT) |
+/- 90° |
|
HEAD TILT (FRONT TO BACK) |
+/- 45° |
|
DISTANCE, SPINDLE TO COLUMN |
5 TO 27” (127 TO 685 MM) |
|
DISTANCE, SPINDLE TO TABLE |
0 TO 18” (0 TO 457 MM) |
|
TRAVELS |
|
|
TABLE TRAVEL X-AXIS, WITHOUT POWER FEED (PF) |
35” (880 MM) |
|
TABLE TRAVEL X-AXIS, WITH POWER FEED (PF) |
38″ (965 MM) |
|
CROSS TRAVEL, Y AXIS |
16” (406 MM) |
|
KNEE TRAVEL, Z AXIS |
16” (406 MM) |
|
RAM TRAVEL |
22” (570 MM) |
|
DRILLING CAPACITY |
|
|
MILD STEEL (MANUAL) |
1.25” (32 MM) |
|
MILLING CAPACITY |
|
|
MILD STEEL |
4 IN³/MIN. (10.2 CM³/MIN) |
|
BORING RANGE |
|
|
MILD STEEL |
UP TO 8” (203 MM) |
|
QUILL |
|
|
POWER QUILL FEEDS |
0.0015, 0.003, 0.00511 IN/REV (0.04, 0.08, 0.13 MM/REV) |
|
SPINDLE TAPER |
R-8 (OPT. #40 NST; #30 NST) |
|
QUILL DIAMETER |
3.38” (86 MM) |
|
QUILL TRAVEL |
5” (127 MM) |
|
MACHINE DIMENSIONS |
10″ x 55.25″ New Republic Lagun Vertical Mill Model FTV-2FE Features:
- The head is equipped with a “high velocity cooling system”. The generated “air flow” keeps the head at a constant temperature. The fully enclosed head will keep dust from the shop environment out, keeping critical parts and components such as: pulleys, belts, and bearings, etc., clean and dust free. (See detail A)
- The new head has two speed ranges, 5 HP constant drive, and infinite variable speeds. (see D) The dynamically balanced head (see B) reaches full horse power over all the speed ranges, (Low 55 to 490 – High 490 to 4,250 RPM) (See E) without the typical losses of EVS systems. This head is capable of reaching 358 ft-lb of torque (See –Graphic HP vs. RPMS) at a mere 55 RPM.
- The quill 3 3/8” (85 mm) is hard chromed with a precision ground rack.Special high performance transmission belt are used. The heart of our mechanical infinite variable speed milling head uses the same hi-technology found in the continuously variable transmission of the latest Hybrid automobiles.
- Spindle taper is R-8 (optional # 40 NST, #30 NST with four hi-precision, class 7 bearings.
- The head assembly can be tilted front-to-back and swiveled right-to-left. Angular settings employ worm and gear.
- Ram/head assembly can be easily rotated a full 360° degrees. (See detail
- Massive ram features 19″ (483 mm) of bearing length and 22 3/16″ (563 mm) of travel.
- The ram design allows use of the optional slotting attachment. The slots are mounted opposite the standard head (with optional kit 149-1140K).
- All lead screws are thread rolled and precision ground.
- A unique double nut assembly provides backlash adjustment of longitudinal and cross feed screws. Adjustment of this device eliminates backlash due to wear.
- Table & saddle locks are conveniently located in front of the machine. Handles are spring loaded to allow repositioning once locked. This advanced design clamps the table to the saddle, but does not push on a gib. As a result, the table will hold its position more accurately.
10″ x 55.25″ New Republic Lagun Vertical Mill Model FTV-2FE Standard Equipment:
- Spindle Taper R-8 with 4 ea. Class Seven Hi-Precision Bearings
- Flood Coolant System
- Hardened & Precision Ground Ways
- One Shot Lubrication System
- Draw Bar
- Operators Manual/Parts List
- Basic Service Tool Kit
- 3/60/220/440 Volt Electrics
- Base Chip Pan
- Halogen Worklight
- Way Covers
10″ x 55.25″ New Republic Lagun Vertical Mill Model FTV-2FE Accessories:
|
10-220 |
220V MUST BE DECIDED AT TIME OF ORDER |
$0.00 |
|
|
10-440 |
440V MUST BE DECIDED AT TIME OF ORDER |
$0.00 |
|
|
10-UL-001 |
UL APPROVED |
$1,580.00 |
|
|
10-204-1181-UL |
SPECIAL ELECTRICS 220/440V NEMA ENCLOSURE |
$5,300.00 |
|
10-UH150-B015 |
SPINDLE #40 TAPER W/ BEARINGS (SPECIFY W/ MACHINE ORDER) |
$1,495.00 |
|
|
10-270-1162 |
QUILL MOUNTED INCH/METRIC DIGITAL SCALE |
$638.00 |
|
|
10-085-0110A |
POWER DRAW BAR, PNEUMATIC, USE WITH STANDARD DRAW BAR (POWER UNIT ONLY) (R8, NST 40, CAT 40) |
$1,245.00 |
|
10-388AA |
QUICK INDEX QUILL DOWN FEED HANDLE |
$208.00 |
|
|
10-402Q |
QUICK POSITION DOWN FEED QUILL STOP |
$93.00 |
|
|
10-160-1168 |
MIST COOLANT SYSTEM |
$1,475.00 |
|
SERVO #350 X-POWER FEED, LONGITUDINAL, 110V |
$2,027.00 |
|
|
SERVO #350 Y-POWER FEED CROSS, 110V |
$2167.00 |
|
|
SERVO #350 Z POWER FEED, KNEE LIFT, 110V |
$2,200.00 |
|
10-192-1402 |
LAGUN LIGHTING, X-AXIS, LONGITUDINAL POWER FEED; 110V |
$1,195.00 |
|
|
10-192-1403 |
LAGUN LIGHTING, Y-AXIS, CROSS POWER FEED; 110V **SEE PICTURE ABOVE** |
$1,195.00 |
|
|
10-192-1404 |
LAGUN LIGHTING, Z-AXIS, VERTICAL KNEE LIFT; 110V **SEE PICTURE ABOVE** |
$1,195.00 |
|
10-250-8090R-B |
2 AXIS NEWALL NMS800 SYSTEM, 16 X 40 |
$4,029.00 |
|
|
10-252- 8085RBQ |
3 AXIS NEWALL NMS800 SYSTEM W/ QUILL, 16 X 40 X 5 **SEE PICTURE ABOVE** |
$5,283.00 |
|
10-252-8085RB-K |
3 AXIS NEWALL NMS800 SYSTEM W/ KNEE, 16 X 40 X 16 **SEE PICTURE ABOVE** |
$5,283.00 |
|
|
10-M203-8009- Q |
3 AXIS ACU-RITE M203, W/ QUILL, 16 X 40 X 5 |
$3,950.00 |
|
|
10-M203-8009-K |
3 AXIS ACU-RITE M203, W/ KNEE, 16 X 40 X 18 **SEE PICTURE ABOVE** |
$3,738.00 |
|
10-121-1106 |
CLAMP KIT AND STUD SET52 PCS. 5/8″ TSLOTS |
$430.00 |
|
|
10-086-1101 |
SET R-8 COLLETS 1/8″ TO .”11 PCS. |
$435.00 |
|
10-2496-1120 |
COLLET RACK FOR R-8 COLLETS; 48 PCS. |
$140.00 |
|
|
10-086-1101CR |
COLLECT RACK FOR R-8 COLLECTS; 16 PCS. |
$101.00 |
|
|
VISES |
|||
|
10-125-1116 |
LAGUN 6″ ANG LOCK, SWIVEL BASE VISE, 8″ OPENING |
$689.00 |
|
|
10-125-1115-A |
KURT 6″ DX6 ANG LOCK VISE, 9″ OPENING (OPT: SWIVEL BASE) |
$1,385.00 |
|
10-22935604 |
SWIVEL BASE FOR KURT 6” VISE |
|
$1,026.00 |
|
DRILL CHUCK |
|||
|
10-125-1110-1/2 |
1/2″ DRILL CHUCK (KEY TYPE) W/ R-8 SHANK |
$345.00 |
|
|
10-125-1110-5/8 |
5/8″ DRILL CHUCK (KEY TYPE) W/ R-8 SHANK **SEE PICTURE ABOVE** |
$390.00 |
|
|
10-125-1110B |
1/2″ DRILL CHUCK (KEY TYPE) W/ #40 TAPER **SEE PICTURE ABOVE** |
$520.00 |
|
|
10-140-1110-5/8 |
5/8″ DRILL CHUCK (KEY TYPE) W/ #40 TAPER **SEE PICTURE ABOVE** |
$560.00 |
|
|
SHELL MILL |
|||
|
10-089-1104A-1 |
SHELL MILL ADAPTER IN R-8, .” |
$214.00 |
|
|
10-089-1104A-2 |
SHELL MILL ADAPTER IN R-8, 1″ **SEE PICTURE ABOVE** |
$229.00 |
|
|
10-089-1104A-3 |
SHELL MILL ADAPTER IN R-8, 1 .” **SEE PICTURE ABOVE** |
$222.00 |
|
|
10-089-1104B-1 |
SHELL MILL ADAPTER IN # 40 TAPER, .” **SEE PICTURE ABOVE** |
$327.00 |
|
|
10-089-1104B-2 |
SHELL MILL ADAPTER IN # 40 TAPER, 1” **SEE PICTURE ABOVE** |
$327.00 |
|
|
END MILL HOLDERS |
|||
|
10-088-1102-R8 |
1 SET END MILL HOLDERS R8 TAPER; 7PC; 1/8″, 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 1″ |
$998.00 |
|
|
10-088-1102B-1 |
1 SET END MILL HOLDERS-#40 TAPER; 7 PC; 1/8”, 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1” **SEE PICTURE ABOVE** |
$2,385.00 |
|
10-127-1112A |
RIGHT ANGLE ATTACHMENT; R-8 |
$1,869.00 |
|
|
10-127-1112B |
RIGHT ANGLE ATTACHMENT; #40 TAPER (3 3/8” QUILL) **SEE PICTURE ABOVE** |
$2,650.00 |
|
|
ARBORS |
|||
|
10-130-1114A |
1″ ARBOR, 18-1/4″ LONG WITH BUSHINGS AND R-8 |
$1,020.00 |
|
|
10-130-1114B |
1″ ARBOR, 18-1/4″ LONG WITH BUSHINGS AND #40 **SEE PICTURE ABOVE** |
$842.00 |
|
|
10-129-1113A |
ARBOR SUPPORT W/1″ ARBOR 9″ -R8 |
$1,290.00 |
|
|
CHUCKS |
|||
|
10-103-1176 |
COLLET CHUCK W/ SET OF 15 COLLETS FROM 1/8″ TO 1″, #40 |
$920.00 |
|
|
10-103-1176-M |
#40 100TG COLLET CHUCK W/ 1 SET OF 8 METRIC COLLETS; 6MM, 8MM, 10MM, 12MM, 14MM, 16MM, 18MM, 20MM. **SEE PICTURE ABOVE** |
$1,200.00 |
|
|
10-100-206-20 |
1 SET OF 8 COLLETS- METRIC, TO BE USED WITH COLLET CHUCK 100TG; SIZE 0.24 TO 0.79” (6 TO 20 MM). |
$829.00 |
|
|
RISER BLOCK |
|||
|
10-146-1135A |
4″ RISER BLOCK |
$1,787.00 |
|
|
10-145-1135A |
6″ RISER BLOCK |
$1,881.00 |
|
|
10-147-1136A |
8”RISER BLOCK |
$1,989.00 |
|
|
10-148-1137 |
10″ RISER BLOCK |
$2,119.00 |
|
|
10-148-1137A |
12” RISER BLOCK |
$2,277.00 |
|
10-179-1120 |
ROTARY TABLE; 10” DIAMETER HORIZONTAL/VERTICAL WITH INDEX PLATES |
$2,585.00 |
|
|
10-181-1125 |
ROTARY TABLE; 12” DIAMETER HORIZONTAL/VERTICAL WITH INDEX PLATES |
$3,349.00 |
|
10-180-1121 |
TAILSTOCK FOR 10” TABLE |
$1,770.00 |
|
|
10-182-1126 |
TAILSTOCK FOR 12” TABLE |
$1,858.00 |
|
10-149-1140N-ASSY-A |
PRECISION-SLOTTING ATTACHMENT, STROKE: 5” (125 MM); 5/8” TOOL CAPACITY. 3 SLOTTING BARS (6MM, 8MM, 10MM) FLANGE A MOUNTING KIT • • |
$5,371.00 |
|
10-164-1100 |
AUTO LUBRICATION SYSTEM RECOMMENDED FOR BALL SCREWS |
$1,950.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
