Description
The DoALL DS-320SA StructurALL® semi-automatic, dual-miter band saw is designed for cutting vertical and angular material for low volume piece production. The DS-320SA model dual-swivel ability allows miter-cutting from 60° right and 45° left. The semi-automatic DS-320SA model features a variable frequency drive with programmable feed rates. A large variety of optional accessories are available to customize the machine for specific sawing requirements.
11.75″ x 12.5″ New DoAll Horizontal Band Saw Model DS-320SA Specifications:
Cutting capacity round tube 90° | 11.75″ |
Cutting capacity round solid 90° | 6″ |
Cutting capacity rectangle 90° | 11.75″ x 12.5″ |
Capacity round at 45° | 4″ – 11.75″ |
Capacity rectangle at 45° | 7.75″ x 11.75″ |
Capacity round at 60° | 3″ – 7.75″ |
Capacity rectangle at 60° | 7.25″ x 7.25″ |
Saw blade (width x length) | 1″ x 144″ |
Band Drive | |
Motor Hp | 3 Hp |
Band speed | 65-325 fpm |
Band tension | Manual |
Hydraulic System | |
Motor Hp | 0.7 Hp |
Reservoir Size | 2.5 gallon |
Coolant System | |
Flood | Yes |
Mist lubricator | Yes |
Motor HP | 0.17 Hp |
Reservoir size | 4 gallon |
Indexer | |
Length per stroke | N/A |
Maximum index strokes length | N/A |
Remnant length | N/A |
Floor Space Dimensions | |
W x L x H | 90″ x 46″ x 56″ |
Material pass height | 31.5″ |
Machine weight | 1,433 lbs |
Electrical | |
Voltage requirement (Wye configuration) | 230V-60Hz-3ph |
Total amp draw (FLA) | 12 amps |
11.75″ x 12.5″ New DoAll Horizontal Band Saw Model DS-320SA Standard Equipment:
- Dual swivel head to 45 left to 60 degrees right
- Semi-automatic cycle
- Movable control console
- Rapid head down approach
- Carbide faced saw guide inserts
- Material height sensor
- Manually adjusted short stroke hydraulic vise
- Driven band cleaning brushes
- Infinite band speed controlled by variable frequency drive
- Heavy duty counter balance springs
- Cast steel band wheels
- Fine adjustment head feed control
- Manual band tension
- Recirculating coolant system
- Mist band lubricator system
- Easy read angle position scale
- 3 ft manual set work stop
- Saw blade guards
- Band door interlocks
- Operation and parts manuals on USB stick
- Recommended band speed chart
- One (1) complimentary DoALL bi-metal saw blade
- Complimentary DoALL cutting fluids package
11.75″ x 12.5″ New DoAll Horizontal Band Saw Model DS-320SA Optional Accessories:
300-LR-RDP 3.3 ft Input conveyor for angle cutting with drip pan/gutter – 15.4″ roller width – 134 lbs/ft capacity – has adjustable leg | $588 |
300-LR-RDZ 3.3 ft Output conveyor for angle cutting with drip pan/gutter – 15.4″ roller width – 134 lbs/ft capacity – has adjustable leg | $588 |
RD-2000/390 6.6 ft Input or output conveyor – 15.4″ roller width – 134 lbs/ft capacity – has adjustable leg | $722 |
RB-200 Single fixed vertical guide roller – 7.8″ height – Mounts to RD conveyor | $80 |
RBS-200/390 Single adjustable vertical guide roller – 7.8″ height – Requires RB-200 for operation | $141 |
231547 10 ft Medium-duty idler conveyor 13″ between frames. Roller capacity 850 lbs | $2,477 |
231546 5 ft Medium-duty idler conveyor 13″ between frames. Roller capacity 850 lbs | $1,521 |
300×320-HP Hydraulic vertical clamp for nesting | $1,048 |
RDN-390 Conveyor support | $183 |
MD-10-5 5 ft. Digital work stop (Mounts on conveyor) | $1,477 |
MD-10-10 10 ft. Digital work stop (Mounts on conveyor) | $1,999 |
300×320-QPARTS Wear parts service kit – contains wear plates, guides, band brushes | $449 |
226028 Magnetic wand chip remover | $195 |
230-QPARTS Wear parts service kit – contains wear plates, guides, band brushes | $449 |
299998 Additional USB stick of manuals | $92 |
NRTL A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards | $3,500 |
SVC CHARGE LABOR Four (4) hours installation and operator training | $600 |
Warranty DoALL Cut Above 10 Year Warranty Annual Investment | $840 |
1200001 Starter Kit of Six Pack Blades consist of 1 each Silencer GP 6-10, 8-12, Silencer Plus 4-6, 5-8, and StructurALL 4-6, 5-8 | $350 |
13410245 5 Gal. Pail of Band All 102 Semi Synthetic | $160 |
21200045 5 Gal. Pail of AL-2000 Mist Coolant | $240 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.