Description
11.75″ x 12.5″ New DoAll Horizontal Band Saw Model S-320CNC
The DoALL S-320CNC StructurALL® miter, CNC automatic, metal-cutting band saw is ideal for fabricating shops, maintenance facilities, tool and manufacturing plants. The S-320CNC can also be classified as a horizontal structural, scissor-style miter-cutting saw. Hydraulically controlled, this CNC machine provides automatic indexing for multiple material feeds. With the easy-to-use controller, operators need only remove the material that has been cut. Designed for vertical and angular cuts, the DoALL swivel band saw is adjustable to 60° to the right in semi-automatic mode only.
11.75″ x 12.5″ New DoAll Horizontal Band Saw Model S-320CNC Specifications:
Cutting capacity round tube 90° | 11.75″ |
Cutting capacity round solid 90° | 6″ |
Cutting capacity rectangle 90° | 11.75″ x 12.5″ |
Capacity round at 45° | 4″ – 11.75″ |
Capacity rectangle at 45° | 11.25″ x 11.75″ |
Capacity round at 60° | 3″ – 7.75″ |
Capacity rectangle at 60° | 7.25″ x 7.25″ |
Saw blade (width x length) | 1″ x 144″ |
Band Drive | |
Motor Hp | 3.5 Hp |
Band speed | 65-325 fpm |
Band tension | Manual |
Hydraulic System | |
Motor Hp | 1 Hp |
Reservoir Size | 2.5 gallon |
Coolant System | |
Flood | Yes |
Mist lubricator | Yes |
Motor HP | 0.17 Hp |
Reservoir size | 2.25 gallon |
Indexer | |
Length per stroke | 19.5″ |
Maximum index strokes length | 394″ |
Remnant length | 3″ |
Floor Space Dimensions | |
W x L x H | 91″ x 75″ x 60″ |
Material pass height | 31.5″ |
Machine weight | 1,993 lbs |
Electrical | |
Voltage requirement (Wye configuration) | 230V-60Hz-3ph |
Total amp draw (FLA) | 14.7 amps |
Standard Equipment:
- Swivel head to 60 degrees right
- Automatic cycle
- Movable control console
- Rapid head down approach
- Carbide faced saw guide inserts
- Material height sensor
- Full stroke hydraulic vises
- Driven band cleaning brushes
- Ball screw with incremental feed
- Heavy duty counter balance springs
- Cast steel band wheels
- Fine adjustment head feed control
- Overfeed protection
- Infinite band speed controlled variable frequency drive
- Mitsubishi touch screen controller
- Digital angle position
- Out of stock sensor
- Manual band tension
- Variable vise pressure
- Recirculating coolant system
- Mist band lubricator system
- Work light
- Saw blade guards
- Band door interlocks
- Operation and parts manuals on USB stick
- Recommended band speed chart
- One (1) complimentary DoALL bi-metal saw blade
- Complimentary DoALL cutting fluids package
11.75″ x 12.5″ New DoAll Horizontal Band Saw Model S-320CNC Optional Accessories:
300-LR-RDZ 3.3 ft. Output conveyor for angle cutting – 15.4″ roller width – 441 lbs/ft capacity – has adjustable leg | $588 |
RD-2000/390 6.6 ft. Input or output conveyor – 15.4″ roller width – 134 lbs/ft capacity – has adjustable leg | $848 |
RB-200 Single fixed vertical conveyor roller – 7.8″ roller height – Mounts to the RD table | $79 |
RBS-200/390 Single adjustable vertical conveyor roller – 7.8″ roller height – 15.4″ roller width – Requires RB for operation | $140 |
231547 10 ft Medium-duty idler conveyor 13″ between frames. Roller capacity 850 lbs | $2,477 |
231546 5 ft Medium-duty idler conveyor 13″ between frames. Roller capacity 850 lbs | $1,520 |
300×320-HP-A Front and rear hydraulic vise nesting – set of 2 | $3,175 |
RDN-390 Conveyor support | $183 |
300×320-QPARTS Wear parts service kit – contains wear plates, guides, band brushes | $449 |
BOX-TRI Chip pan with drain | $648 |
226028 Magnetic wand chip remover | $195 |
NRTL A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards | $3,500 |
299998 Additional USB stick of manuals | $91 |
Warranty DoALL Cut Above 10 Year Warranty Annual Investment | $2,058 |
1200002 Starter Kit of Six Pack Blades consist of 1 each Silencer GP 6-10, 8-12, Silencer Plus 4-6, 5-8, and StructurALL 4-6, 5-8 | $348 |
13410245 5 Gal. Pail of Band All 102 Semi Synthetic | $160 |
21200045 5 Gal. Pail of AL-2000 Mist Coolant | $240 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.