Description
11″ x 10″ New Amada Horizontal Scissor Style Band Saw Model HA250W Specifications:
| Cutting Capacity | |
| Round (diameter) | 1.18″ – 10″ |
| Rectangle (W x H) | 11.8″ x 10″ |
| Work Load Capacity | 3,307 lbs |
| Saw Blade | |
| Blade Size (L x T x W) | 11’6″ x 0.042″ x 1-1/4″ |
| Blade Speed | 89-295 ft./min 60 Hz Stepless |
| Tension Control | Hydraulic |
| Blade Control | |
| Top Limit Setting | Automatic Setting with Quick Approach Feeler |
| Cutting Control | Hydraulic Pressure-Flow Control Valve |
| Vise Operation | |
| Type | Main Split Vise and Rear Vise |
| Control | Hydraulic Full-Stroke Cylinder |
| Motors | |
| Saw Blade | 5 HP |
| Hydraulic Pump | 1 HP |
| Cutting Fluid Pump | 1/4 HP |
| Power Requirement | |
| Power Supply Voltage | AC220V±10%, 3 PH, 60 Hz or AC440V±10%, 3 PH, 60 Hz |
| Power Requirement | 8 kVA |
| Cutting Fluid | |
| Tank Capacity | 22.5 gal |
| Pump Type | Centrifugal Electric |
| Pump Capacity | 5.3 gal/min |
| Hydraulic | |
| Tank Capacity | 7.9 gal |
| Pump Type | Variable Discharge Vane Electric Pump |
| Pump Capacity | 4 gal/min |
| Pressure Setting | 384 psi |
| Chip Disposal | Chip Conveyor |
| Material Index | |
| Index Mechanism | Shuttle Vise |
| Stroke | 15.75″ (maximum 9 times index) |
| Length | 0.394″-141.7″ |
| Number of Input Station | 1 |
| Number of Cut-Off Pieces | 1-9999 |
| Remnant Length | 2.24″ Plus length of parts |
| Machine Dimensions (W x L x H) | |
| Head-Up Position | 76.5″ x 93.1″ x 69.8″ |
| Head Down Position | 76.5″ x 93.1″ x 50.6″ |
| Table Height | 27.6″ |
| Machine Weight | 3,307 lbs |
11″ x 10″ New Amada Horizontal Scissor Style Band Saw Model HA250W Features:
- SAW HEAD FRAME: The rigid ‘C’ section frame carries the mountings for the two band wheels, heavy-duty worm drive gear reducer, the band drive motor, and saw guide arm mounting supports.
- BAND WHEELS & DRIVE SYSTEM: The band wheels are cast iron for long, productive life. The deflection free 1.38 inch (35 mm.) wheel spindles ensure the wheels run true regardless of tension stress or cutting loads. The spindle assemblies incorporate tapered roller bearings for greater rigidity and long service life. The wheel tracks the blade so that the back of the band is contacts the wheel flanges to support the band. The drive motor is coupled to the transmission through a variable speed pulley.
- DRIVE WHEEL TRANSMISSION:The drive wheel transmission is designed and built by Amada to provide high efficiency speed reduction, which requires no external cooling, to deliver more power to the large diameter drive shaft. This shaft ensures that this developed torque is transferred to the blade with no strobing, enabling the machine to efficiently cut high alloys as well as free machining materials.
- PRESSURE/FLOW FEED CONTROL:The independent pressure and flow controls in series ensure the optimum cutting rate can be obtained regardless of section or alloy being cut. The pressure control determines the cutting force applied to the blade and the flow control sets the maximum fall rate of the head. For example for difficult to machine materials the pressure is set higher than free machining alloys and the flow is set lower, as shown on the escutcheons above the above the control knobs.
- IDLER WHEEL MOTION DETECTOR:The wheel motion detector will turn off the blade drive in the case where a blade breaks or is jammed in the work piece. This feature also prevents premature wear on the drive wheel from a stalled band.
- AUTOMATIC, POWERED CHIP CONVEYOR:The electrically powered chip conveyor auger automatically removes the saw chips from the saw while draining the cutting fluid back into the fluid reservoir. Hydraulic-powered shaftless chip conveyor for chip removal and coolant separation. The automatic chip conveyor greatly reduces cleanup time and enables the machine to run longer without operator cleanup.
- 9 TIMES MULTI INDEX: The machine control has the capability to make up to nine index passes, giving a maximum cut length of 141.7″ for HA250W and 177″ for HA400W in automatic mode
- SPLIT FRONT VISE:The work holding vise is split so that it clamps the workpiece on both sides of the cutting plane. This additional support in front of the cutting plane minimizes the burr on the cut pieces.
- AUTOMATIC KERF COMPENSATING DIAL: On multiple index, the need to calculate for kerf loss has been eliminated.
- INDEX FLOATING VISE: Indexing accuracy of +/- 0.004”/index. Both vise jaws open on the indexing vise to accommodate crooked bars and eliminate scoring the OD of finished bars.
- ZERO CLAMP VISE
- DIAGNOSTIC LIGHTS
- PIECE COUNTER
- VARIABLE BLADE SPEED DRIVE
- BLADE BREAK LIMIT SWITCH
- 2 WAY-OPENING VISE
- OPERATOR’S CONSOLE
11″ x 10″ New Amada Horizontal Scissor Style Band Saw Model HA250W Optional Accessories:
| Vertical Clamps | |
| Vise Pressure Control | |
| Roller Table 4′ | |
| Roller Table 6′ | |
| Roller Table 10′ | |
| Staging Table 6’X4’ | |
| Staging Table 10’X4’ | |
| External Chip Conveyor | |
| Extended Warranty= Regular 1 year + Additional year Total 2 years |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions
All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.
