Description
11″ x 58″ New Clausing Knee Mill Model 500EVS08 Specifications:
| Table & Ways | |
| Table size | 11″ x 58″ |
| Table load | 990 lbs |
| No. of T-slots | 3 |
| T-slot width | 5/8″ |
| T-slot center distance | 2.48″ |
| Travels | |
| X axis, longitudinal | 38.2″ |
| Y axis, cross | 16″ |
| Z axis, knee | 17.7″ |
| Ram travel | 22″ |
| Ram swivel | 360º |
| Spindle to column | 5.3″ – 27.2″ |
| Spindle nose to table | 1.57″ – 19.2″ |
| Spindle Head | |
| Spindle drive motor | 5 Hp |
| Spindle speed range | 50-5000 rpm |
| Spindle taper | R8 or NMTB30 |
| Quill travel | 5″ |
| Quill diameter | 3.8″ |
| Quill feed (in/rev) | 0.00157″/0.00315″/0.0315″ |
| Head tilt (front or back) | 45º |
| Head tilt (left or right) | 90º |
| Construction & Weight | |
| Column turret diameter | 16.54″ |
| Knee width | 15.35″ |
| Knee bearing length | 19.69″ |
| Saddle length | 25.59″ |
| Table bearing length | 11.02″ |
| Ram/turret bearing length | 17.72″ |
| Height | 90.6″ |
| Depth w/ram travel | 82.7″ |
| Weight w/table travel | 110″ |
| Width | 74″ |
| Base depth | 44″ |
| Base width | 25″ |
| Spindle to column | 5.3″ – 27.2″ |
| Spindle to table | 1.57″ – 19.2″ |
| Head tilt | 90º right & left |
| Machine weight | 3,300 lbs |
| Shipping weight | 3,700 lbs |
11″ x 58″ New Clausing Knee Mill Model 500EVS08 Standard Equipment:
- Quick and accurate rpm setting
- Convenient, head mounted, easy to use control panel
- LCD spindle speed display
- Spindle brake with auto power off
- Totally enclosed electric’s with Yaskawa A.C. inverter variable speed drive
- Carbon steel, hardened and ground, chrome plated quill
- Coolant system
- Up to 11”x 58” table size
- Meehanite castings for superior rigidity and wear resistance
- Double nuts for easy backlash adjustment
- Up to 38.2” X axis travel, 16” Y axis travel, 17.7” knee travel and 5” quill travel
- All ways are hardened and ground with Turcite B coating on X and Y axis ways for wear resistance and smooth operation
- Ground ram ways
- Column & knee way covers
- Hardened and ground table surface
- Ground T-slots to provide reference edge for positioning workpiece
- Hardened and ground spindle
- Hardened, ground and chromed quill
- Hardened X & Y axis leadscrew and Nickel Phosphorous treated
- Flexible segmented coolant nozzle
- 5 Hp AC motor
- Yaskawa inverter variable speed drive
- Square Y & Z axis ways and Dovetail X axis ways
- Lever operated manual rapid quill movement
- Handwheel for fine quill
- Adjustable automatic feed disengagement for quill feed in both directions
- Micrometer depth stop
- Reversing switch for clockwise or counterclockwise operation
- R8 or NMTB30 Spindle
- Spindle hand brake with auto power off
- One-shot lubrication
- Test and accuracy chart
- Tools, tool box, operation and parts manuals
- Standard 230 3 Phase (other voltages require a transformer or special order)
11″ x 58″ New Clausing Knee Mill Model 500EVS08 Optional Accessories:
| Voltages Other than 230/3/60 Volt Require a Transformer | |
| SM1302 208 to 230 Volt Buck Boost Transformer 5Hp 8.4KVA | $795.00 |
| SM1302A 460 to 230 Volt Reduction Transformer 5Hp 8.4KVA | $1,050.00 |
| R8 Spindle Accessories Only | |
| EVS8408 Pneumatic Power Draw Bar R8 Spindle (installed) | $2,015.00 |
| EVS128 R8 Right Angle Attachment (cannot use with power drawbar option) | $820.00 |
| EVS129 R8 Horiz. Mill Arbor Support (cannot use with power drawbar option) | $415.00 |
| EVS130 1” Milling Arbor R8 | $305.00 |
| EVS133 R8 Horz Mill Kit inc: RT Angel, Arbor, & Support (cannot use with power drawbar option) | $1,220.00 |
| FV-9031G R8 to J2 Arbor for FV-9030G | $170.00 |
| FV-9033G R8 to J6 Arbor for FV-9032G | $170.00 |
| FV-9041G 12pc R8 Collet Rack | $45.00 |
| FV9050G ½” R8 Shell Mill Holder | $100.00 |
| FV-9051G ¾” R8 Shell Mill Holder | $100.00 |
| FV-9052G 1” R8 Shell Mill Holder | $100.00 |
| FV-9080G R8 End Mill Adapter Set 3/16-1 ¼ (8 pcs.) | $320.00 |
| Z384-SET-1 R8 Metric Set 2mm by 1mm, 19 Collets | $405.00 |
| Z384-SET-5 R8 Inch Collet Set 1/8 to 7/8 by 32nds, 25 Collets | $1,045.00 |
| Z384-SET-6 R8 Inch Collet Set 1/8 to 7/8 by 1/16ths, 13 Collets | $555.00 |
| Z384-SET-7 R8 Inch Collet Set 1/8 to ¾ by 1/8ths, 6 Collets | $270.00 |
| NMTB30 Spindle Accessories Only | |
| EVS8430 Pneumatic Power Draw Bar NMTB30 Spindle (installed) | $2,015.00 |
| EVS128A NMTB30 Right Angle Attachment (cannot use with power drawbar option) | $820.00 |
| EVS129A NMTB30 Horiz Mill Arbor Support (cannot use with power drawbar option) | $415.00 |
| EVS130A 1” Milling Arbor NMTB30 | $305.00 |
| EVS133A NMTB30 Horz Mill Kit inc: RT Angel, Arbor, & Support (cannot use with power drawbar option) | $1,220.00 |
| FV-9081G NMTB30 End Mill Adapter Set 3/16-1 (7 pcs) | $740.00 |
| All Accessories | |
| EVS102A Auto Lube Pump | $320.00 |
| EVS107 A.C Rapid Vertical Knee Feed (TW factory) | $1,285.00 |
| EVS108A X & Y Ballscrews (TW factory) | $2,940.00 |
| EVS120A Chip Tray | $640.00 |
| EVS121 Halogen Work Light | $190.00 |
| EVS223 6” Riser Block | $860.00 |
| EVS224 8” Riser Block | $1,025.00 |
| EVS250-X X Axis Power Feed (Taiwan) (installed) | $1,460.00 |
| EVS250-Y Y Axis Power Feed (Taiwan) (cannot be used with ballscrew option) (installed) | $1,295.00 |
| FV-9010G Kurt 6” Vise Only | $775.00 |
| FV-9011G Kurt 6” Swivel Base for FV-9010G | $525.00 |
| FV-9012G Vise Step Key Kit 11/16 x 5/8 (set of 2) | $105.00 |
| FV-9030G ½” Keyless Drill Chuck | $230.00 |
| FV-9032G 1/8” to 5/8” Keyless Drill Chuck | $240.00 |
| CS-9062 Coolant Mist System 1 Gal | $1,020.00 |
| 2VS010 52 Pc Clamp Set | $195.00 |
| EVS-CSA5 CSA Canadian Electric Standard (incl box & cntrl panel) (non-certification) | $1,840.00 |
| DRO Kits | |
| AR1840100M5 2 Axis 11” X 58” TBL Acu-Rite 100 DRO (installed) | $2,050.00 |
| AR1840200M5 2 Axis 11” X 58” TBL Acu-Rite 200 DRO (installed) | $2,395.00 |
| AR1840300M5 2 Axis 11” X 58” TBL Acu-Rite 300 DRO (installed) | $2,795.00 |
| AR4-1840200M5 3 Axis w/Spindle 11” X 58” TBL Acu-Rite 200 DRO (installed) | $3,015.00 |
| AR4-1840300M5 3 Axis w/Spindle 11” X 58” TBL Acu-Rite 300 DRO (installed) | $3,415.00 |
| AR18-4018200M5 3 Axis w/Knee 11” X 58” TBL Acu-Rite 200 DRO (installed) | $3,325.00 |
| AR18-4018300M5 3 Axis w/Knee 11” X 58” TBL Acu-Rite 300 DRO (installed) | $3,725.00 |
| NW16-40-DP700 2 Axis 11” X 58” TBL Newall DRO (installed) | $2,365.00 |
| NW6-16-40-DP700 3 Axis w/Spindle 11” X 58” TBL Newall DRO (installed) | $3,140.00 |
| NW18-16-40-DP700 3 Axis w/Knee 11” X 58” TBL Newall DRO (installed) | $3,140.00 |
| FG18-40-PKMC 2 Axis 11” X 58” TBL Fagor DRO (installed) | $2,795.00 |
| FG18-40-PKM 2 Axis 11” X 58” TBL Fagor LED DRO (installed) | $2,395.00 |
| FG06-18-40-PKMC 3 Axis w/Spindle 11” X 58” TBL Fagor DRO (installed) | $3,415.00 |
| FG06-18-40-PKM 3 Axis w/Spindle 11” X 58” TBL Fagor LED DRO (installed) | $3,015.00 |
| FG18-18-40-PKMC 3 Axis w/Knee 11” X 58” TBL Fagor DRO (installed) | $3,725.00 |
| FG18-18-40-PKM 3 Axis w/Knee 11” X 58” TBL Fagor LED DRO (installed) | $3,325.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
