12” x 18” New Marvel Horizontal Mitering Style Saw Model SA330WPC

  • Heavy-Duty
  • Hydraulic
  • Miter Cutting
  • Horizontal
  • Metal Cutting
  • 5 H.P.
  • 1” Blade
SKU: 18612 Categories: , ,

Description

Specifications:

Capacity: 90° Rectangle 13” x 16”, Round 13”
Capacity: 45°
Rectangle 11” x 13”, Round 11”
Mitering
Manually positioned to 45° right, equipped with degree scale.
Pass Line Height
32-1/4”.
Blade
1” x .035” x 13’ 7”
Blade Tension
28,000 PSI. Manually controlled tension with Blade Tension Indicator Gauge provides consistent square cutting accuracy. The motion detector will shut the machine off should the blade break or stall.
Speed Range
95 – 295 SFPM (29 – 90 m/min) infinitely variable through an inverter drive and a heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. The on screen tachometer assures accurate speed setting.
Hydraulic Down Feed
Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
Hydraulic Shuttle Feed
Length settings of 0 – 27.6” are accomplished with simple programming at the operator’s touch screen. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is ± .005 per index.
PC Programmable Control
Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to ten jobs. Inputs include Part Length from 0 to 393.661” and Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen, but is not stored in memory. The Automatic Piece Counter stops each job when the pre-set number of cuts has been made. The control provides the option of running up to 10 jobs consecutively.
Motors
Blade Drive: 5 H.P., Hydraulic Pump Motor: 1 H.P., Coolant Pump Motor: 1/8 H.P. – All motors are dual voltage, choose either 230 or 460 volt, 3 ph. 60 Hz.
Out-of-Stock Switch
The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.
Blade Guides
The combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of ± .002 per inch of cut material.
Fast Approach
Work height is manually set allowing the head to rise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
Chip Brush
Powered from the main drive wheel of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.
Full Stroking Hydraulic Vise Jaws Holding The Work Piece, Providing Accurate Cuts And Longer Blade Life.
Rear Vise The Rear Vise Jaw Floats Hydraulically To Accommodate Crooked Stock Assuring Straight, Accurate Cuts.
Operator’s Control Panel Conveniently Mounted On The Right Hand Side Of The Machine And Offers Full Control Of All Machine Functions Such As; Vises, Blade Speed, Saw Frame, Bundle Clamping, Shuttle Advance & Retract, Coolant And Work Light.
Work Light Positioned Directly Over The Work Area To Provide Better Illumination Of The Cutting Area, The Work Light Can Be Turned On And Off Independently From The Operator’s Control Panel.
Machine Weight 2904 Lbs.net / 3190 Lbs. Gross (On Skid)

Standard Equipment:

  • Blade Tension: Hydraulically controlled tension (35,000 psi) provides consistent square cutting accuracy. The motion detector will shut the machine off should a blade break or stall. Blade wheel diameter is 34.625” to provide maximum blade life.
  • Speed Range: 50-325 SPFM (15-100m/min) infinitely variable through a frequency inverter system and a heavy duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An electric tachometer assures accurate speed settings.
  • Hydraulic Down Feed: Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color coded dial allowing the operator to select the best setting for the type of material being cut.
  • Blade Guides: A combination of roller bearing and hydraulically actuated carbide blade guides assures the blade is held taut for fast, accurate cuts. The cast iron movable guide arm is positioned through a hydraulic cylinder, then is hydraulically locked in place.
  • Chip Brush: Independent motor drives the blade brush to assure complete removal of chips from each gullet of the blade assuring optimum cutting performance and enhanced blade life.
  • Fast Approach: Work height is automatically set allowing the head to raise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
  • Controls: An independent electric cabinet and control panel allow the operator to position the controls for optimum viewing of the cutting area. A PLC controls all electrical and hydraulic functions.
  • Blade Tension: Manually controlled tension with Blade Tension Indicator Gauge provides consistent square cutting accuracy. The motion detector will shut the machine off should the blade break or stall.
  • Speed Range: 95 – 295 SFPM (29 – 90 m/min) infinitely variable through an inverter drive and a heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An electric tachometer assures accurate speed setting.
  • Hydraulic Down Feed: Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
  • Hydraulic Shuttle Feed: Length settings of 0 – 27.6” (700mm) are accomplished with simple programming at the operator’s touch screen. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is + .005 per index. (Maximum pull weight fully supported on rollers 4,400 LBS).
  • Out-of-Stock Switch: The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.
  • Blade Guides: The combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of + .002 per inch of cut material.
  • Fast Approach: Work height is manually set allowing the head to rise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
  • Chip Brush: Powered from the main drive wheel of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.
  • Work Light: Positioned directly over the work area to provide better illumination of the cutting area, the work light can be turned on and off independently from the operator’s control panel.

Optional Accessories:

  • Automatic Chip Removal
  • Hydraulic Hold-downs
  • Variable Vise Pressure
  • Auto Mist Lube
  • Free Standing Roller Table

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouse and office is located just minutes north of Columbus, Ohio. With over 25 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service support and technical expertise on all new and used machine tools to meet their needs.

We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or fill out the Request A Quote form on the right side of this page.

Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.

Terms: Check With Order

F.O.B Factory

Check us out on Twitter, Facebook, Youtube, LinkedIn and Instagram

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.