New 16' x 500 Ton Standard Press Brake for sale at Worldwide Machine Tool

12′ x 250 Ton New Standard Press Brake Model AB250-12 – IN STOCK

  • 5 Year Parts Warranty
  • 5 Year Limited Onsite Labor
  • Unlimited telephone support at no charge
  • (2) 24” Work Support Arms
  • USA MADE!
Terms:  Check with Order
SKU: 28610 Category:

Description

12′ x 250 Ton New Standard Press Brake Model AB250-12

Max Bending Length 12′”
Max Tonnage 250 Tons /175
Between Frames 10′-5″
Open Height 16″
Stroke 8″
Closed Height 8″
Throat Depth 10″
Top Bed Height 38″
Weight 36,000
Horsepower 20
Ram Speed (IPM) Approach 102
Ram Speed (IPM) Press 16
Ram Speed (IPM) Return 132

12′ x 250 Ton New Standard Press Brake Model AB250-12 Features

  • All Components Readily Available from Your Local Suppliers
  • Groove in Bed and Ram Clamps for American Style Tooling
  • Typical 20-30 Year Lifetime
  • Hydraulic Tonnage Control
  • Full Tonnage throughout Stroke
  • Counterbalance Valve for Punching 
  • Typical +, – .001” Repeatability
  • Full Tonnage across Bed and Ram
  • 5 Year Parts Warranty
  • 5 Year Limited Onsite Labor
  • Unlimited telephone support at no charge
  • (2) 24” Work Support Arms
  • Manifold centralized lube system
  • Hand/Foot sequence with footswitch
  • T-slot across front edge of bed
 

12′ x 250 Ton New Standard Press Brake Model AB250-12 Options

Safety 
Light Curtain with Footswitch
Floating blank key-switch included, some programmability. Side barriers included to completely protect throat area of machine. 1 year warranty. … $6,500.00
Other brands of light curtains available at special request
 
Laser Guarding Systems
Wraps lasers around punch to allow operator closer to pinch-point and still be O.S.H.A. approved. 1 year warranty. … $15,800.00
(Laser Guard system NOT recommended for punching/bottoming applications or applications with many die changes)
 
Compliance Options including UL Listing, CSA, ZED 
As standard all components are U.L. listed but the system as a whole is not U.L. compliant.  For U.L. compliant machine … $2,500.00
 
NOTE! This price does not include U.L. officer sign off at destination—that is the responsibility of the customer for other listings Price per quote
 
Additional Footswitch and Pedestal Control  … $2,100.00
 
For multiple operators Low Speed Retract
Ram returns in slow press speed for handling of large work pieces. … $600.00
 
Safety Guarding for rear of press brake … $5,500.00
Up to 14’. Comes with swinging gates and interlocking system for shut down while open.  Custom guarding systems available.
 
Operational Preference Controls
 
Auto Return of Ram
Normal operation of ram requires operator to release footswitch to allow ram to return to upper limit.  This option makes the ram return automatically even if footswitch is still depressed.  … $700.00
 
Decompression System
REQUIRED FOR BOTTOMING APPLICATIONS—allows oil pressure to bleed off to reduce shock to hydraulic system. … $900.00
 
Lubrication System
 
Automatic Lubrication System (air power required)
Automatically pumps EP-1 grease through lubrication system via a timed system.  Also includes flow adjustable injectors.  Includes auto-shutoff with warning light when reservoir is empty. … $5,300.00
 
Extended Warranty Service
This package includes:
A 7 year parts in lieu of standard 5 year parts warranty
A 1 year PLC and CNC warranty 
A 5 year onsite limited labor warranty  
 
100 ton through 400 ton press brake … $5,200.00
 
Paint Color
 
BLUE WITH WHITE TRIM is standard on all machines—Charcoal is available at no charge but must be requested.
 
Special Paint Color (single color industrial enamel only)  A sample is required … $1,200.00
 
Support Arms and Accessories
 
NOTE! All brakes come standard with (2) 24″ basic work supports. T-slot support arms have precision t-slot bars added to set gravity stops.
 
 
T-Slot Support Arms
24” T-Slot Support Arm … $550.00 (ea.)
36” T-slot Support Arm … $900.00 (ea.)
48” T-slot Support Arm … $1,100.00(ea.)
For imbedded scales in arms Add … $200.00
Gravity Stop for t-slot support arm … $400.00 (ea.)
 
5/8” T-slot across front edge of bed 
Allows left to right movement of t-slot support arms INCLUDED
 
Sheet Assists/Sheet Followers
Heavy duty sheet follower to raise up and down with work piece in conjunction with ram travel.  Handles up to 400 lbs. $42,900.00
Parking Option $3,900.00
 
Quick-Release Linear Work Support System 
 
Quick-change, quick-disconnect style support arms with heavy duty, smooth transition roller guides for easy arm movement.  Multiple adjustment points on arms for super precision placement.
Special slot/Machined surface required for $2,900.00 
(For 10’-14’ press brakes)
     (2) 24” Arm System … $5,900.00  
     (2) 36” Arm System … $7,100.00
 
 
Simple Go-To Backgauge and Ram Control 
NOTE!  The Four Position in-line Depth Stop and the Go-To backgauge can be bought separately but they work very well together as a low cost manual X + Y axis control
Y Axis Only Ram Control
 
Four Position In-Line Depth Stop Mechanical Ram Control
Manual ram control that allows operator to pre-set up to 4 different ram depths/angles by adjusting mechanical limits on the side of the brake.  The operator can choose from any of the 4 positions from a selector switch located on the 2 hand control pedestal out in front of machine.   $2,500.00
 
Simple Go-To X Axis Only Backgauge
 

Simple Go-To X Axis Only Backgauge

X axis 24” travel Dual drive  Go-To power backgauge                               $15,400.00
For up to AB400-14

 
Simple 2-3 X Axis CNC Super basic control
NOTE!  The Automec 300 control is specifically for users who want the most basic X, Y and R programming available. 
 
Automec 300 Series Control with 24” of gauge travel 300 programs
11 digit part numbers Ram depth mode + Bend Allowance
Teach mode Ram Angle Mode
Tooling library Gauge retract/delay 
Auto ram reference Onsite training for Automec control
 

CNC300/G24HD 2 Axis  AB100-6 thru AB325-12   $26,000.00
CNC300/G48HD (48” travel, heavy duty) 2 axis for AB400-12/AB400-14   $37,400.00
R Axis Add $6,000.00           48” Travel Add $10,300.00

Note: Standard mechanical ram limit switches are included as back-up.
 
630 Control with Tooling Graphics 1-4 axis Available up to Y + X + R + CNC CROWNING
 
Easy to use but extremely versatile control with on-screen 2D Tooling graphics
10″ color touchscreen mounted on pendant
2D graphical Offline software for desktop programming available optionally
Available with X/ Y/ R and CNC Crowning axis programmability (crowning optional)
Thousands of hard drive job storage plus unlimited  job storage via  USB port + RS232 port + Ethernet
Extensive tooling library
Readily accepts most tooling files
Programmable delay and retract at pinch point                
Inch/mm conversion     
29” of X axis gauge travel (optional 39”)
8” adjustable manual R or optional power R
Auto return of ram included
Low speed retract included
Dwell/decompression included
One day onsite training in contiguous U.S.                                   
 

630 w/Y axis control only (no backgauge-Onsite training included)       $13,500.00
630 X/Y axis 29” gauge travel for AB100-12/14—AB600-12/14                   $29,500.00
Programmable CNC Ram tilt  Allows you to program the desired ram tilt within the programmable jobs of the CNC.                                         $3,500.00
2D Off-line programming software $900.00
R Axis Add $6,000.00
39” of gauge travel in lieu of 29” $7,900.00
Programmable tonnage $700.00
Additional finger $2,500.00
Radan 3D DXF/DWG File Transfer Capability Contact for quote

Note: mechanical ram limit switches are not included with 630 or 640 units

640 Full 2D Graphical Control   1-6 axis
Available up to Y + X + R + Z1-Z2 + CNC CROWNING

Fully 2D Graphical control with touchscreen
Auto return of ram included
15” color screen on pendant 
3D On screen part viewing 
Crowning correction in degrees
2D identification of best bending sequences
2D graphical Offline software for desktop programming 
2D collision detection
Unlimited job storage via USB &  RS232 ports + Ethernet 
X, Y, R, Z1-Z2 programmability
Readily accepts most tooling files
30,000 hard drive programs
Programmable delay & retract at pinch point                
Inch/mm conversion                     
Low speed retract included          
Dwell/decompression included
2 Day onsite training at customer’s facility
 

640 X/Y axis w/29” gauge travel for 14’ and shorter up to 600 tons          $34,300.00
Programmable CNC Ram tilt  Allows you to program the desired ram tilt within the programmable jobs of the CNC.                                         $3,500.00
R Axis Add $6,000.00
Z1-Z2 Axis $12,900.00 (must have R axis)
39” of gauge travel in lieu of 29” $7,900.00
Programmable tonnage $700.00
2D graphical off-line software INCLUDED
Additional finger $2,500.00
Radan 3D DXF/DWG File Transfer Capability Contact for quote
660PC 3D CNC Control quote available upon request

 
Tooling
 
NOTE! NO DIES OR DIE HOLDERS ARE INCLUDED AS STANDARD—ALL DIES MUST BE ORDERED OPTIONALLY
 
NOTE: THE CUSTOMER HAS FULL RESPONSIBILITY FOR HOW WELL DIE SETS WORK FOR THEIR APPLICATIONS.  PLEASE REVIEW PRESS BRAKE OPEN HEIGHT & STROKE AND TOOLING STACK HEIGHTS TO INSURE PROPER DIE PENETRATION!
 
Dies quoted below are subject to 1 year die manufacturer’s warranty.  
 
FLAME HARDENING IS OPTIONAL—CONTACT FOR QUOTE
 
Four Way Die Sets 
 

Four Way Die Sets

#225 Tooling package for 18 gauge up to 3/16” pl.

(1) 2” net height die holder
(1) 3.75” long x 1 1/8” wide, 85 degree punch with 3/64” radius
(1) 2.25” square die block with 1/2”, 3/4”, 1”, and 1 1/2” v die openings at 85 degrees.

7.5” STACK HEIGHT—note: consider die penetration

10’ in length                                                                               $7,900.00
12’ in length                                                                               $8,200.00
14’ in length                                                                               $9,200.00

#325 Tooling package for 12 gauge up to ¼” plate

(1) 2” net height die holder
(1) 3 3/4” long x 1 1/2” wide. 85 degree punch with 3/64” radius
(1) 3 1/4” square die block with 3/4”, 1”, 1 1/2” and 2” v die openings at 85 degrees.
9” STACK HEIGHT—note: consider die penetration

10’ in length                                                                               $9,100.00
12’ in length                                                                               $10,400.00
14’ in length                                                                               $11,000.00

#475 Tooling package for 10 gauge up to 3/8” plate

(1) 2 1/2” net height die holder
(1) 3 1/4” long x 2” wide, 85 degree punch with 1/8” radius
(1) 4 3/4” square die block with 1”, 1 1/2”, 2 1/2” and 3” wide v  die openings at 85 degrees. 

Total of 10.5” Stack height
12’ in length                                                                               $13,500.00
14’ in length                                                                               $14,300.00

#575 Tooling package for 10 gauge up to ½” plate

(1) 2 1/2”net height die holder
(1) 3 3/4” long x 1 1/2” wide, 85 degree punch with 1/8” radius
(1) 2 3/4 long x 2 1/2” wide, 85 degree punch with 1/4” radius
(1) 5.75” square die block with 1”, 2”, 3” and 5” v die openings at 85 degrees.  Total of 12” Stack Height w/tall punch and 11″ stack height with short punch

12’ in length                                                                               $18,700.00
14’ in length                                                                               $20,200.00

 Die Holders/Spacers for American style tooling—Not required for 4 way die sets

3” x 3” x 10’                                                                                $4,000.00
3” x 3” x 12’                                                                                $4,300.00
3” x 3” x 14’                                                                                $4,700.00

Contact factory for other size die holders and all other tooling requirements

 
WILA Crowning and Clamping Systems
 
NOTE:  Crowning is rarely needed for the AB due to the full tonnage capability the entire length of the bed but certain applications can benefit from a crowning unit.  Contact the factory for more information.
 
Manual and CNC crowning units used for fine tuning forming applications.  When using with 4 way die sets add $800.00 for clamps to hold four way die blocks from 2.25” up to 4.25”.  Larger four way die sets will require E-wide or larger crowning unit.
Wila Crowning 
 
FOR DIES UP TO 3.5” WIDE
  Manual CNC Autocrown CNC Autocrown w/hyd. bed clamping
10′ $18,900.00 $22,700.00 $28,800.00
12′ $20,200.00 $24,000.00 $31,500.00
14′ $22,400.00 $26,000.00 $33,700.00
 
E-WIDE CROWNING FOR DIES UP TO 6” WIDE  
  Manual CNC Autocrown CNC Autocrown w/hyd. bed clamping
10′ $25,600.00 $29,300.00 $37,800.00
12′ $27,400.00 $31,200.00 $41,400.00
14′ $30,700.00 $34,400.00 $46,600.00
 
For crowning for V die openings larger than 6″ contact factory
 
New Standard Premium, heavy duty hardened crowning systems, also available
 
WILA Ram Clamping Systems
 
Tooling for Wila quick-change ram clamping systems quoted require: American Style Tooling + Safety Tangs with all punches
 
Wila Hydraulic Quick-Change, Power Ram Clamping Systems
  American
New Standard Pro
10’ $20,300.00
$20,600.00
12′ $21,500.00
$22,000.00
14′ $23,300.00
$23,600.00
 
New Standard Premium, heavy duty hardened clamping systems, also available
 
Contact factory for quotes on all other WILA products
 
Removable and Non-Removable Bed and Ram Width Extensions
 
Machining required for Removable Flanges for up to 12’ machines
 
 ($1,600.00 each for bed or ram) $3,200.00  
 
Removable 5”x 5” Angle flanges– MUST INCLUDE ABOVE MACHINING 
 
10” total additional width x 10’ long between end housings only.  
For flanges longer than 10’ contact factory ($6,100.00 each for bed or ram) … $12,200.00
 
Non-Removable Permanent Bed and Ram Flanges
 
Price below for 12’ overall and shorter brakes (contact factory for longer brakes) 11 ½” wide x 10’ Bed and Ram Flanges … $6,400.00   
(Between Housings only)
14” wide x 10’ Bed and Ram Flanges (Between Housings only) … $7,400.00   
18” wide x 10’ Bed and Ram Flanges $10,600.00 (Between Housings only)
Other size Non-removable flanges are available upon request
 
 
 
High Speed Systems
Horsepower will increase with Hi-Speed Systems
Tonnage Standard System     Hi-Speed System     Price
  App Press Ret App Press Ret  
100/150       200 24 260 $7,900.00
200 107 20 139 183 20 236 $7,100.00
250 102 16 132 150 16 195 $7,100.00
325 90 18 116 159 18 127 $7.100.00
400 110 17 106 173 17 130 $7,600.00
For other High Speed Systems Contact Factory
 
Extra Open Height, Extra Throat Depth, Extra Stroke
Tonnage 12” Horn Ext. B & R 2” ExtraThroat 4” Extra Throat 2” Extra Stroke 2” Ex. Open Ht. (per every 2”)
100 $3,900.00 $3,500.00 $4,500.00 **$5,900.00 $700.00
150 $4,100.00 $3,800.00 $4,800.00 **$5,900.00 $800.00
200 $4,500.00 $3,900.00 $4,900.00 $6,500.00 $900.00
250 $4,700.00 $4,200.00 $5,200.00 $6,500.00 $900.00
325 $5,000.00 $4,800.00 $7,000.00 $7,000.00 $1,100.00
400 $5,300.00 $5,400.00 $7,400.00 $7,000.00 $1,200.00
 
Horn extensions provide 24” of extra bed and ram length.  Longer extensions are available upon special request.  Tonnage is limited on horns past the end frames to 10% of overall machine tonnage.
 
Consult factory for special changes not listed above.  All frame changing options will be applied to new order machines only.
** NOTE: Longer Stroke NOT available on 6’, 8’ or 10’ brakes
NOTE: When ordering more than 6” of extra open height or throat depth on any tonnage consult factory for price.
NOTE: When ordering extra stroke, you do not automatically get extra open height.  When ordering extra open height, you do not automatically get extra stroke.  Both extra open height and extra stroke are separate options.
 
Start-Up / Training / Maintenance Service
NOTE! Onsite factory training/start-up is not included or required with purchase of a new press brake.  Due to the simplicity of our machinery formal training is rarely required.  All CNC Systems already include onsite training in quoted price.  
Prior to arrival of our technician, the machine must be fully rigged in place, level, bolted down, oil in reservoir and hooked up electrically If one day’s training/start-up for the machine is required add the following charge.
Pacific/Mountain Time Zone: … $3,800.00 (net)
Central Time Zone … $2,800.00 (net)
Eastern Time Zone … $3,400.00 (net)
Add $800.00 for each additional day required.
 
Deposit/Order Entry
A 25% NON-REFUNDABLE deposit is required at the point of order entry and the delivery schedule will not begin until the deposit is received at Standard Industrial.  Customer is also required to pay for and accept delivery of machine(s) at previously agreed upon month of completion.
 
 
Voltage
If the machine is 50 H.P. or more, there will be a charge for 230, 208 or 200 volts.  The standard voltage is 230-3-60 up to 40 h. p. but can be supplied up to 480-3-60 at no charge.  50 h. p. machines and above are standard with 480-3-60.  Other voltages, phases and hertz are available but are subject to price increases.
 
 
 
Retro-Fit NOTE: 
 
All Prices listed in these options pages are available with the purchase of a new press brake AT THE POINT OF ORDER ENTRY.  After orders have been placed, any added or changed options will be subject to retro-fit prices.
 
If ordering options for retro-fit in the field, many of these options are subject to crating charges for safe shipping purposes.  Large items like backgauges will have crating charges as well as additional charges to ease the retro-fitting process.
 
NOTE: No tooling, gauging or oil is included as standard with the purchase of a new press brake.  Tooling is available optionally. Customer will need to supply Mobil DTE24 or equivalent hydraulic oil (contact factory for amount).
 

WARRANTY STATEMENT

     The main frame and ram are warranted for structural integrity (cracks in the welds) for Five years.  The drive components such as shafts, bearings and slides are warranted for Five years, and purchased hydraulic and electric components (not PLC) for Five years.  Any PLC or PLC related items or CNC options have a 2 year warranty.  Tooling and tooling related items are subject to the manufacturer’s warranty, typically 1 year. 

     Limited onsite labor is included as part of the 5 year warranty but it is ONLY included as part of the warranty with express written consent of manufacturer after all troubleshooting has been fulfilled by customer.   

     All Prices Are Subject To change At Any Time.  Customer is responsible for freight, rigging, leveling and electrical hook-up unless otherwise agreed upon.

Terms:  25% deposit required at the point of order to begin delivery schedule or hold quick delivery machine.  All Prices are fob Clarksdale, MS and are in U.S. dollars.

     The customer is responsible for all applicable local, state and federal taxes and tariffs.  Customer is required to take delivery of and pay for machine at agreed upon time of completion.

     Standard Industrial is only responsible for the operation of the machine itself and specifically not responsible for the customer’s application.  Standard will not be held responsible if the machine does not perform to the customer’s expectations due to the customer’s assumption that Standard is familiar with their application.  This includes all dies and die related items, CNC, PLC, supports, peripherals, options and add-ons of any kind. 

 

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/