13″ x 14″ New Marvel Horizontal Band Saw Model PA13MPC Specifications:
|Round Cutting Capacity||13”|
|Rectangle Cutting Capacity||13” x 14”|
|Saw Blade Dimensions||13’6” x 1.25” x .042”|
|Blade Speed||60-330 SFPM|
|Blade Drive||5 HP|
|Hydraulic Pump||1 HP|
|Coolant Pump||1/8 HP|
|Machine Weight||4200 lbs|
|Work Load Capacity||6250 lbs|
|Maximum Index Length||20”|
13″ x 14″ New Marvel Horizontal Band Saw Model PA13MPC Standard Equipment:
BLADE TENSION Hydraulically controlled tension (30,000 psi) provides consistent square cutting accuracy. The motion detector will shut the machine off should the blade break or stall.
SPEED RANGE 70 – 330 SFPM infinitely variable through a frequency inverter drive and heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. A read out at the operator’s touch screen assures accurate speed setting.
HYDRAULIC DOWN FEED Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
HYDRAULIC SHUTTLE FEED Length settings of 0 – 20″ are accomplished with simple programming at the operator’s touch screen. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is +/- .005 per index.
MOTORS Blade Drive: 5 H.P. Inverter Drive, Hydraulic Pump Motor: 1 H.P., Coolant Pump Motor: 1/8 H.P. All motors are either, 230 or 460 Volts, 3 ph., 60 Hz.
OPERATOR’S CONTROL PANEL Conveniently mounted on the left hand side of the machine and offers full control of all machine functions such as; Vises, Blade Speed, Saw Frame, Bundle Clamping, Parts Counter, shuttle Advance & Retract, Coolant and Work Light.
MPC PROGRAMMABLE CONTROL Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to nine jobs. Inputs include Part Length from 0 to 400″ and Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen, but is not stored in memory. The Automatic Piece Counter stops each job when the pre-set number of cuts have been made. The control provides the option of running up to 20 jobs consecutively.
OUT-OF-STOCK SWITCH The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.
BLADE GUIDES The combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of +/- .002 per inch of cut material.
FAST APPROACH Work height is automatically set allowing the head to rise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
AUTOMATIC CHIP REMOVAL The chip auger rotating in teh coolant return removes chips quickly and efficiently, freeing the operator to perform more productive operations. Coolant is allowed to drain back to the tank before the chips are removed from the machine.
CHIP BRUSH Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.
WORK LIGHT Positioned directly over the work area to provide better illumination of the cutting area, the work light can be turned on and off independently from the operator’s control panel.
VISE JAWS Hydraulic Full Stroking. Front jaws are split to reduce the remnant to as little as 3″. The split vise jaws also help to reduce burrs left on the material and are ideal for bundle cutting. Holding the work piece on both sides of the blade reduces blade vibration, providing more accurate cuts and longer blade life.
13″ x 14″ New Marvel Horizontal Band Saw Model PA13MPC Optional Accessories:
- Hydraulic Hold Downs
- Free Standing Control Console
- First Section Dead Roller Table
- Extension Roller Table
- Coolant Pan
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouse and office is located just minutes north of Columbus, Ohio. With over 25 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or fill out the Request A Quote form on the right side of this page.
Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Terms: Check With Order