Description
The 13″ x 19.5″ New DoAll Horizontal Band Saw Model DS-500SA semi-automatic, dual-miter metal-cutting band saw is designed for cutting material both linear and at angles.
Also classified as a horizontal “scissor saw,” the DS-500SA is ideal for machine shops, metal service centers, repair facilities and industrial manufacturing plants that need to cut structural metal, tube and profile material. Miter angle cuts are possible up to 60° left and right, making the DS-500SA an invaluable addition to your team.
A Mitsubishi digital readout comes as standard and makes it easy to verify exact cutting angles and set operation parameters. The operator is also removed from the saw blade and moving parts during the cut — providing additional safety and comfort.
13″ x 19.5″ New DoAll Horizontal Band Saw Model DS-500SA Specifications:
Cutting capacity round tube 90° | 14″ |
Cutting capacity round solid 90° | 7″ |
Cutting capacity rectangle 90° | 13″ x 19.5″ |
Capacity round at 45° | 5″ – 14″ |
Capacity rectangle at 45° | 8.5″ x 17″ |
Capacity round at 60° | 3″ – 11.75″ |
Capacity rectangle at 60° | 8.5″ x 12″ |
Saw blade (width x length) | 1.25″ x 188″ |
Band Drive | |
Motor Hp | 4 Hp |
Band speed | 65-328 fpm |
Band tension | Manual |
Hydraulic System | |
Motor Hp | 0.5 Hp |
Reservoir Size | 3 gallon |
Coolant System | |
Flood | Yes |
Mist lubricator | Yes |
Motor HP | 0.6 Hp |
Reservoir size | 5 gallon |
Indexer | |
Length per stroke | N/A |
Maximum index strokes length | N/A |
Remnant length | N/A |
Floor Space Dimensions | |
W x L x H | 114″ x 43″ x 56″ |
Material pass height | 32″ |
Machine weight | 1,631 lbs |
Electrical | |
Voltage requirement (Wye configuration) | 230V or 460V-60Hz-3ph |
Total amp draw (FLA) | 230V – 14 amps 460V – 7 amps |
13″ x 19.5″ New DoAll Horizontal Band Saw Model DS-500SA Standard Equipment:
- Dual swivel head to 60 left to 60 degrees right
- Semi- Automatic cycle
- Movable control console
- Rapid head down approach
- Carbide faced saw guide inserts
- Programmable material height sensor
- Full stroke hydraulic vise
- Driven band cleaning brushes
- Infinite band speed controlled by variable frequency drive
- Heavy duty counter balance springs
- Cast Steel band wheels
- Fine adjustment head feed control
- Spring loaded detent positioning
- Manual band tension
- Recirculating coolant system
- Mist band lubricator system
- Digitally displayed angle position
- Variable Vise Pressure
- 2 degree cant design
- Saw blade guards
- Band door interlocks
- Operation and parts manuals on USB stick
- Recommended band speed chart
- One (1) complimentary DoALL Bi-Metal saw blade
- Complimentary DoALL Cutting Fluids package
13″ x 19.5″ New DoAll Horizontal Band Saw Model DS-500SA Optional Accessories:
360-RDP 2000/520 6.6 ft Heavy-duty input conveyor for angle cutting with drip pan/gutter – 20.5″ roller width – 1142 lbs/ft capacity | $2,841 |
360-RDZ 2000/520 6.6 ft Heavy-duty output conveyor for angle cutting with drip pan/gutter – 20.5″ roller width – 1142 lbs/ft capacity | $2,823 |
360-RDT 2000/520 6.6 ft Input or output conveyor with drip pan/gutter – 20.5″ roller width – 672 lbs/ft capacity | $2,575 |
231548 5 ft Idler conveyor | $1,612 |
231549 10 ft Idler conveyor | $2,620 |
360-V Additional conveyor roller | $365 |
360-RB Single fixed vertical guide roller – 20.5″ roller width – Mounts to the RDT | $395 |
360-RBS Single adjustable vertical guide roller – Requires RB for operation | $255 |
360-HP Hydraulic vertical clamp for nesting | $1,152 |
Laser Laser line generator | $1,302 |
M-50-5 5 ft. Tape work stop (Mounts on conveyor) | $3,536 |
M-50-10 10 ft. Tape work stop (Mounts on conveyor) | $4,373 |
MD-50-5 5 ft. Digital work stop (Mounts on conveyor) | $5,449 |
MD-50-10 10 ft. Digital work stop (Mounts on conveyor) | $6,524 |
360-QPARTS Wear parts service kit – contains wear plates, guides, band brushes | $632 |
226028 Magnetic wand chip remover | $195 |
299998 Additional USB stick of manuals | $92 |
NRTL A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards | $3,500 |
SVC CHARGE LABOR Four (4) hours installation and operator training | $600 |
Warranty DoALL Cut Above 10 Year Warranty Annual Investment | $1,960 |
1200003 Starter Kit of Six Pack Blades consist of 1 each Silencer Plus 3-4, 4-6, 5-8, and StructurALL 3-4, 4-6, 5-8 | $475 |
13410245 5 Gal. Pail of Band All 102 Semi Synthetic | $160 |
21200045 5 Gal. Pail of AL-2000 Mist Coolant | $240 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.