14″ x 40″ New Acer Lathe Model 1440V

  • Electronic Variable Speed Drive
  • LED Display of RPM
  • 6″ -3 Jaw Chuck
  • 8″ -4 Jaw Chuck
  • Steady & Follow Rest
  • Hardened & Ground Gears
  • Foot Brake
  • Forced Lubrication of Headstock
  • Flood Coolant System
  • Work Light
  • Inch & metric Threading
  • 4 Way Tool Post
  • Full Length Splash Guard

Terms: Check With Order
F.O.B Factory

SKU: 8027 Category:


14″ x 40″ New Acer “Variable Speed” Geared Head Lathe Specifications:

Center Height 7″
Swing Over Bed 14″
Swing Over Gap (Gap type only) 20-3/4″
Swing Over Cross Slide 8″
Distance Between Centers 40″
Spindle Nose D1-4
Spindle Bore Diameter 1-1/2″
Type of Spindle Nose MT. #5
Taper of Center MT. #3
Spindle Speeds 26-2000 RPM
Cross Slide Travel 8″
Compound Rest Travel 3-1/2″
Max. Size Cutting Tool 3/4″ x 3/4″
Spindle Diameter 1-7/16″
Spindle Travel 4″
Bed Length 54″
Bed Width 9″
Width of Gap 8″
System Inch
Pitch of Leadscrew 24 Ø, 4 TPI
Metric Pitch Threads 0.4~7mm/pitch (32 kinds)
Range of Longitudinal Feeds 0.0026″~).0368″/rev.
Range of Cross Feeds 0.0008″~0.0122″/rev.
Main Drive Motor 3 HP
Coolant Pump Motor 1/8 HP
Floor Dimension 70″ x 32″
Net Weight 1,580 lbs
Gross Weight 1,800 Lbs
Packing Dimension 77″ x 33″ x 63″
SKU # 1325

14″ x 40″ New Acer “Variable Speed” Geared Head Lathe Features:

  • HEADSTOCK: All gears are made with chromium molydenum steel and are hardened & ground to its accuracy. A forced lubrication system lubricates all running gears and bearings within the headstock.
  • GEAR BOX: Unique two lever universal gear box offers a wide range of cutting capacity. All ranges can be reached by moving two levers and two dials.
  • SPINDLE: 1-1/2″ bored spindle is made from medium carbon steel and is induction hardened & ground to its final accuracy. It also has a two-point support with both bearings being taper roller.
  • APRON: Automatic feeding and threading in apron are fully interlocked to prevent simultaneous engagement of both functions.
  • TAILSTOCK: Keyed 1-7/16″ diametered quill is hardened to Rockwell C 55° & ground to its inspection accuracy.
  • Infinite variable speeds
  • Oil level indicator
  • 24 volts safety control circuit with Allen Bradley switches
  • Weigh in at 1,580 lbs
  • Safety overload device
  • Standard foot brake
  • Forward/stop/reverse lever
  • Half-nut engagement handle
  • 9″ wide bed way with FC-30 casting iron
  • Hexagonal bed web
  • Oil lubricated leadscrew
  • Two-tone automotive paint
  • 1-1/2” Spindle Bore with D1-4 Camlock Spindle Nose
  • 3HP Spindle Inverter Motor
  • “TOSHIBA” Vector-Type or “FUJI” 5HP Frequency Inverter
  • Infinite Spindle Speed: 36 ~ 2,200 RPM
  • Power Supply: Accepts 220V / 1-PH or 220V / 3-PH
  • Precision Ground Gears and Spindle in Headstock
  • Spindle is equipped with Precision Taper Roller Bearings
  • Enclosed Gearbox and Feedscrew w/ Built-In Safety Overload Friction Clutch
  • New and Enhance Design PC Board
  • 9” Bed Width with Hardened and Ground Bedway
  • Machine Net Weight: 1,540 lbs

Standard Accessories

  • One 6” Three Jaw Chuck
  • 4-Way Tool Post
  • One 8” Four Jaw Chuck
  • One 10” Face Plate
  • One Steady Rest (0.78” ~ 2.15”)
  • Built-In Coolant System
  • One Follow Rest (0.78” ~ 1.97”)
  • Full Length Splash Guard
  • Halogen Work Light
  • Foot BrakeToolbox w/ Tools
  • Micrometer Stop
  • Chuck Guard w/ Safety Switch

Optional Accessories

  • “ALORIS” Tool Post & 4-Holder Set (#2-BS) … $800.00
  • “ALORIS” Tool Post & 6-Holder Set (#2 Set) … $1,050.00
  • Four Position Carriage Stop … $350.00
  • 5C Collet Closer (Lever-Type) … $1,150.00
  • Installation Fee for Collet Closer … $100.00
  • Taper Turning Attachment … $900.00
  • Installation Fee on Taper Turning Attachment …     $200.00
  • “NEWALL” DP700 2-Axis D.R.O. (8” x 40” Travel) … $2,300.00
  • “NEWALL” E70 2-Axis D.R.O. & C.S.S … $3,000.00
  • “MAGNASCALE” 2-Axis D.R.O. (8” x 40” Travel) … $2,400.00
  • Installation Fee on NEWALL DP700 or MAGNASCALE DRO … $350.00
  • Installation Fee on NEWALL E70 DRO w/ C.S.S … $450.00
  • Upgrade to 440V / 3-PH Inverter Drive … $500.00

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouse and office is located just minutes north of Columbus, Ohio. With over 25 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service support and technical expertise on all new and used machine tools to meet their needs.

We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or fill out the Request A Quote form on the right side of this page.

Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.

Terms: Check With Order

F.O.B Factory

Check us out on Twitter, Facebook, Youtube, LinkedIn and Instagram