14” x 40” New Clausing Lathe C14 Variable Speed Gap Bed Model C1440VSJ

Terms:  Check with Order

Clausing C14 Series Manual Lathe accessories, features, specifications and standard equipment:

Options

DRO

SKU: 12421 Categories: ,

Description

14” x 40” New Clausing Lathe C14 Variable Speed Gap Bed Model C1440VSJ Features:

  • Geared Headstock, 2 Speed Motor, and Control Panel: The 14” Clausing Lathe has a drive motor that drives a fully geared heavy-duty headstock giving you a total of 16 spindle speeds. All gears are hardened and ground and run in a continual bath of oil. The spindle is made of forged, quenched and tempered steel, with a case hardened spindle nose and mounted on precision taper roller bearings. The easy-to-operate control panel is designed for efficiency. (33/70/45/110/140/165/220/225/330/415/450/665/830/1000/1330/2000 RPM)
  • Variable Speed 2 Gear Headstock and Control Panel (VS Models): The 14″ VS Clausing Lathe with Yaskawa Inverter has a two range headstock giving you a wide selection of variable speeds.  All gears are hardened and ground and run in a continual bath of oil.  The spindle is made of forged, quenched and tempered steel, with a case hardened spindle nose and mounted on precision taper roller bearings.  The easy-to-operate control panel is designed for efficiency.
  • Spindle Brake foot brake system for spindle braking control.
  • Full Length Splash Guard: A standard feature on the 14” lathe, for clean work environment.
  • Carriage & Apron: Controls are designed for easy operation to ensure maximum productivity. Easy-to-read inch dials, a 4-way tool post, and thread dial are standard equipment on the 14” lathe.
  • Chuck Safety Guard and Traveling Chip Guard: For safe operation of the lathe and CE safety marking.
  • Bed & Bedways: The extra-wide scientifically designed bed, with tapered cross braces for fast and easy chip removal, is constructed of stabilized cast iron with bedways hardened of 42 to 47 Rc. The bed is mounted on a rigid, fabricated steel base that is specially engineered to absorb vibration and ensure smooth, accurate operation.
  • Tailstock: A heavy-duty casting design with 2” quill for maximum rigidity to support work pieces or tooling.

14” x 40” New Clausing Lathe C14 Variable Speed Gap Bed Model C1440VSJ Specifications:

Capacity  
Swing over bed 14.25”
Center height 7.1”
Swing in gap 22”
Gap length in front of faceplate 6”
Swing over cross slide 8.265”
Bed width 10”
Center distance 30” / 40″
Headstock  
Spindle bore 1.625”
Spindle nose D1-5
Spindle taper / Bushing taper 3MT/5MT
No. spindle speeds geared drive 16
Spindle speed (rpm) geared drive 33-2000
No. spindle speeds variable drive 2
Spindle speed variable drive 35-2500
Thread and Feed Box  
No. of longitudinal feeds 24
Range (inches) 0.0012-0.016
No. of cross feeds 24
Range (inches) 0.0004-0.0053
No of metric threads 27
Range (mm) 0.4-7
No. of inch threads 36
Range (TPI) 4-72
No. of modular threads 18
Range (mm) 0.3-3.5
No. of diametral pitch threads 21
Range (DP) 8-44
Leadscrew dia./TPI 1.26”/4
Slide and Carriage  
Cross slide travel 7.6″
Cross slide width 5.9”
Compound travel 4”
Compound width 4.01”
Max. tool size w/ 4-way tool post ¾” x ¾”
Tailstock  
Tailstock quill diameter 2”
Tailstock quill travel 4.75”
Tailstock taper 3MT
Motors  
Spindle motor (GH & VS) (Hp) 5
Optional 2SP spindle motor (GH) (Hp) 5/3
Coolant pump motor (Hp) 1/8
Dimensions Machine  
Machine height 50”
Machine width 35”
Machine length 30″/40″ 63″/74″
Machine weight 30″/40″ 1,870 lbs/1,980 lbs
Dimensions Shipping  
Height 66″
Width 36″
Length 30″/40″ 72″/84″
Weight 30″/40″ 2,200 lbs/2,420 lbs

14” x 40” New Clausing Lathe C14 Variable Speed Gap Bed Model C1440VSJ Equipment:

  • Inch Dials
  • Dead Centers
  • 4-Way Tool Post
  • Coolant System
  • One-Shot Lubrication
  • Interlocking Chuck Guard
  • 7” 3-Jaw Chuck SK
  • Steady Rest w/ Rollers .39” to 4.9” Capacity
  • 5-Position Turret Type w/Micrometer Bed Stop
  • Splash Guard
  • Leadscrew Cover
  • Thread Dial Indicator
  • T-Slotted Top Slide
  • Foot Brake Geared Head and Variable Speed Headstock
  • Chip Pan
  • Chip Guard
  • Halogen Work Light
  • CE Electrics
  • Tool Box and Manual

Standard Voltage is 230/3/60 Volt.  Other voltages may require a transformer or special order.

Optional Equipment:

Spindle Options  
J14-55A Magnetic Brake System with Chip Trolley No Foot Brake (factory) $2,060.00
Work Holding Options  
J14-02 Follower Rest w/Roller Tip Fingers .39” to 4.3” $705.00
J14-02A Follower Rest w/Bronze Tip Fingers .39″ to 4.3″ Capacity $580.00
J14-13 Extra Steady Rest w/Rollers .39” to 4.9” Capacity $950.00
J14-13A Steady Rest w/Bronze Tips .39” to 4.9” Capacity $765.00
Tool Post Options  
J14-05A Aloris CXA Tool Post w/4 Holders (2 sided) $1,320.00
13-775A-1 Aloris Extra Straight Holder 3/4” (CXA) $135.00
13-775A-1S Aloris Extra Straight Holder 1” (CXA) $195.00
13-775A-2 Aloris Extra V-Holder 3/4”, 3/4″ bore bar (CXA) $145.00
13-775A-2S Aloris Extra V-Holder 1, 3/4″ bore bar (CXA) $200.00
13-775A-4 Aloris 1″ Heavy Duty Boring Bar Holder $245.00
13-775A-4D Aloris 1″ Boring Bar Holder $190.00
13-775A-41D Aloris 1-1/4″ Boring Bar Holder $205.00
13-775A-5 Aloris Extra 3MT Holder (CXA) $190.00
13-775A-54 Aloris Extra 4MT Holder (CXA) $215.00
13-775A-10 Knurling Q/C Holder w/Med Diamond Blades 9CXA) $255.00
13-775A-10AMS Straight Knurling Tool AC25 Req 2Ea (13-775A-10) $50.00
13-775A-71 Aloris Extra Cutoff Holder 1.5″ height (CXA) $360.00
3-503A-BSL125 Aloris 1/8” Cutoff Blade $105.00
Chucking Options  
J14-01 12” Face Plate D1-5 $545.00
0625322 6” 3-Jaw Setrite Universal Scroll Steel Chuck $1,570.00
0825322 8” 3-Jaw Setrite Universal Scroll Steel Chuck $1,830.00
0626322 6” 6-Jaw Setrite Universal Scroll Steel Chuck $1,820.00
0826322 8” 6-Jaw Setrite Universal Scroll Steel Chuck $2,735.00
0814422 8” 4-Jaw Independent Ductile Iron Chuck $1,475.00
1014422 10” 4-Jaw Independent Ductile Iron Chuck $1,700.00
PB23-D5 PBA Front Mounted Handwheel 5C Collet Chuck $1,550.00
0123-R-(state size) Individual 5C Round Collet Inch $30.00
0123-R-(state size) Individual 5C Round Collet Metric $30.00
0123-SET-4 1/16″-1 1/16″ by 64ths (inch set) $1,850.00
0123-SET-5 1/16″-1 1/16″ by 32nds (inch set) $960.00
0123-SET-6 1/16″-1 1/16″ by 16ths (inch set) $500.00
0123-SET-7 1/8″-1″ by 8ths (inch set) $235.00
0123-SET-1 3mm-27mm by .5mm (metric set) $1,400.00
0123-SET-2 3mm-27mm by 1mm (metric set) $725.00
7659 18pc 5C Collet Rack $55.00
Tailstock Options  
12-510 Live Center $405.00
Miscellaneous Options  
J14-06 Taper Attachment $1,600.00
J14-06 Taper Installation $300.00
DRO  
AR10M30100T 2 Axis Acu-Rite 100 DRO  $2,800.00
AR10M30200T 2 Axis Acu-Rite 200 DRO  $3,030.00
AR10M30300T 2 Axis Acu-Rite 300 DRO $3,515.00
AR10M30300TTHD 2 Axis Acu-Rite 300 DRO w/Thread Assist  $4,550.00
FG0830-PK 2 Axis Fagor LED DRO  $2,800.00
FG0830-PKC 2 Axis Fagor Color DRO  $3,030.00
NW0830DP700 2 Axis Newall LED DRO  $3,030.00
Installation of 2 Axis System $450.00
Installation of 2 Axis w/Threading System $600.00
Installation of Taper Attachment $300.00

 

Clausing Warranty:

Clausing warrantees the machine for a period of one year from the date of shipment. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.