The 380 features the 48” double ball screw bar feed design with following support rollers, shuttle speeds up to 60fpm and repeatability tolerances of +/- .005“. The 380 bar feed uses preloaded recirculating linear guides with the electronic measuring scale implanted within the linear rail. The vises are two stage half stroking. The vise jaws are easily re-positioned on the clamping cylinder to cover a range of either 15” – 7.5” or 8.5” to 0.5”. The vise controls are conveniently located on the PC3 touch screen control.
|Capacity: Nominal 0° Cant||
15″ x 20″, 15″ Round
15″ x 14″, 14″ Round
15″ x 9.25″, 9.25″ Round
15″ x 13.25″, 13.25″ Round
15″ x 8″, 8″ Round
|Capacity: Nominal 3° Cant||
14.5″ x 20″, 14.5″ Round
14.5″ x 13.5″, 13.5″ Round
14.5″ x 8.75″, 8.75″ Round
14.5″ x 12.75″, 12.75″ Round
14.5″ x 7.75″, 7.75″ Round
5 H.P. electric with sensor less vector control for smooth acceleration and full torque.
Infinitely variable: 60 to 400 fpm. Blade speed can be automatically set when material is selected.
For miter cutting up to 60° left and right of vertical. Electrically powered, chain driven, with encoder feedback and Amada Marvel PC3 controller.
0° – 3° Canted Column
Adjustable 0° or 3° forward approach angle, for notching, or increased efficiency in cutting of structural materials. Must specify if 0° or straight column set up is desired as the machines are by default shipped from the factory in 3° Canted Column
Direct Force Sensing Electric Ball Screw Feed which combines more consistent feed force with greater control, 0 – 300 lbs, column travels on re-circulating linear ball ways. Feed pressure can be automatically set when material is selected.
|Jammed Blade Protection||
Automatically senses resistance as the column returns and stops to prevent blade damage.
16′ Long x 1.25″ Wide, .042″. One Welded-Edge Band is furnished with each machine as part of standard Start-up supplies.
Patent pending Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self tensioning design.
Hydraulically controlled, 35,000 psi. max. Machine equipped with automatic blade break / blade stall shut off switch.
|Upper Blade Guide Arm||
Hydraulically positioned and locking, travels on linear guides, controlled through PC3 touch screen control.
Hydraulic, half stroking with 6.7″ High x 11.4″ Wide 60° faceplates. Optional variable vise pressure available.
Built-in Flood system, available with Drop Lubrication system, including chip pan with chip removal ramp.
One ball bearing roller on the entry side of the machine bed.
Washes away chips from hard-to-get-at places reducing clean-up time.
|Automatic Bar Feed||
The Automatic Bar Feed design features a 48″ stroke length with indexing speeds of up to 70 ft./min., and creep speeds of 33 in./min. The bar feed vise is electrically driven and combines precision double ball screws with preloaded re-circulating ball linear guides, resulting in positioning accuracy of ± .005″ per index. The vise itself is hydraulically clamped to prevent material slippage. Material can also be fed through the machine manually in both directions using the shuttle vise. Optional outboard and second machine vises are available.
|Amada Marvel PC3 Programmable Control||
Provides a Programmable Logic Control Unit with an 9″ color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library. Both blade speed and feed force are automatically set according to material type for optimal cutting performance. Job features include Inch/Metric capability, out-of-stock shut down device, a fast cut job option and expanded memory storage using removable media. Also includes Jammed Blade Protection that senses resistance as the column returns and stops to prevent blade damage.
|Standard Left-to-right Work Entry||
Opposite Hand or Right-to-Left work entry available.
Main Drive: 5 H.P., Coolant Pump: 1/8 H.P., Hydraulic Pump: 2 H.P.
IEC fused disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage control to all push buttons at operator’s control panel and machine lighting circuits. PLC control and drives mounted in moisture-tight compartment with vibration isolation mountings. Electrical Equipment conforms to National Electrical Code NFPA 79. The Electrical Control Panel is U.L. Labeled.
- 15” x 20” cutting capacity
- 1.25” blade
- 60° mitering left and right
- 48” double ball screw automatic bar feed with high speed travel for faster cycle times.
- Direct Force Sensing Electric Feed combining more consistent feed force with greater control.
- Direct positioning feedback on automatic bar feed.
- Marvel’s patent pending “Easy Load Blade Guides”
- Precision linear ways on column, automatic bar feed, and guide arm.
- Inverter blade drive with sensorless vector control.
- Patent pending quick change column design, adjustable from 90° to 3° forward cant.
- Jammed blade protection guards against blade damage.
- Servo Bar Feed with Bullet Nose Cutting … $5,490
- Smart Guide Arm … $1,620
- Opposite Hand Work Entry … $1,350
- Manual (Hand Crank) Chip Conveyor … $2,990
- Powered Chip Conveyor … $4,850
- Variable Vise Pressure Control … $790
- Material Handling:
- First Section Dead Roller Conveyor … $1,950
- Extension Dead Roller Conveyor … $1,390
- First Section Dead Roller Conveyor – Free Standing … $2,850
- Extension Dead Roller Conveyor – Free Standing … $1,390
- Additional Rollers … $60
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouse and office is located just minutes north of Columbus, Ohio. With over 25 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or fill out the Request A Quote form on the right side of this page.
Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Terms: Check With Order