15” x 30” New Clausing Lathe C15 Variable Speed Gap Bed Model C1530FVSJ w/ Foot Brake

Terms:  Check with Order
Clausing C15 Series Manual Lathe accessories, features, specifications and standard equipment:

SKU: 29548 Categories: ,

Description

15” x 30” New Clausing Lathe C15 Variable Speed Gap Bed Model C1530FVSJ w/ Foot Brake Features:

  • Variable Speed Headstock and Control Panel (VS MODELS): The 15” VS Clausing Lathe has 10Hp drive motor, and a two range headstock giving you a wide selection of variable speeds. All gears are hardened and ground and run in a continual bath of oil. The spindle is made of forged, quenched and tempered steel, with a case hardened spindle nose and mounted on precision taper roller bearings. The easy-to-operate control panel is designed for efficiency.
  • Spindle Brake magnetic brake system for geared head machine and inverter brake system for variable speed machine
  • Chip Trolley pull out for easy clean up
  • Full Length Splash Guard: A standard feature on the 15” lathe, for clean work environment.
  • Carriage & Apron: Controls are designed for easy operation to ensure maximum productivity. Easy-to-read inch dials, a 4-way tool post, and thread dial are standard equipment on the 15” lathe.
  • Chuck Safety Guard and Traveling Chip Guard: For safe operation of the lathe and CE safety marking.
  • Bed & Bedways: The extra-wide scientifically designed bed, with tapered cross braces for fast and easy chip removal, is constructed of stabilized cast iron with bedways hardened of 42 to 47 Rc. The bed is mounted on a rigid, fabricated steel base that is specially engineered to absorb vibration and ensure smooth, accurate operation.
  • Tailstock: A heavy-duty casting design with 2.312” quill for maximum rigidity to support work pieces or tooling.

Specifications:

Swing over bed 15.25”
Center height 7.5”
Swing in Gap 24”
Gap length in front of faceplate 6”
Swing over cross slide 9.5”
Bed width 11”
Center Distance 30” / 40”/50”
Spindle bore 2.125”
Spindle nose D1-6
Spindle taper / Bushing taper 6MT/4MT
No. spindle speeds Variable Drive 3
Spindle Speed Variable Drive 20-2500
No. of longitudinal feeds 20
Range (inches) 0.0015-0.04
No. of cross feeds 20
Range (inches) 0.0008-0.02
No. of inch threads 45
Range (inches) 2 – 72
No. of diametral pitch threads 21
Range (inches) 8-44
Leadscrew dia./TPI 1.26”/4
Cross slide travel 9”
Cross slide width 6.47”
Compound travel 4.75”
Compound width 4.01”
Max. tool size ¾” x ¾”
Tailstock Quill Diameter 2.312”
Tailstock Quill Travel 6.125”
Tailstock taper 4MT
Spindle motor (GH & VS) (Hp) 7.5
Optional 2SP motor (GH) (Hp) 10
Coolant Pump motor (Hp) 1/8
Machine Height 50”
Machine Width 40”

Standard Equipment:

  • Inch Dials
  • Dead Centers
  • 4-Way Tool Post
  • Coolant System
  • One-Shot Lubrication
  • Interlocking Chuck Guard
  • 9” 3-Jaw Chuck SK
  • Steady Rest w/Rollers .39” to 5.5 “ Capacity
  • 5-Podition Turret Type w/Micrometer Bed Stop
  • Splash Guard
  • Leadscrew Cover
  • Thread Dial Indicator
  • T-Slotted Top Slide
  • Spindle Brake Inverter Variable Speed Head
  • Chip Guard
  • LED Work Light
  • CE Electrics
  • Tool Box and Manual

Optional Accessories

  • J15-70 10 Hp Spindle Motor in Lieu of 7.5 HP G/H … $715
  • J15-02 Follower Rest w/Roller Fingers .39” to 3.93” … $705
  • J15-13 Extra Steady Rest w/Roller Fingers .39” to 5.5” … $905
  • J15-05A Aloris CXA Tool Post w/4 Holders (2 sided) … $1,380
  • 13-775A-1 Extra Aloris Straight Holder 3/4” … $135
  • 13-775A-1S Extra Aloris Straight Holder 1” … $200
  • 13-775A-2 Extra V-Holder ¾” Block ¾” Bar … $150
  • 13-775A-4D Extra Aloris Boring Bar Holder 1” … $195
  • 13-775A-41D Extra Aloris Boring Bar Holder 1-1/4” … $215
  • 13-775A-5 Extra Aloris #3 Morse Taper Holder … $195
  • 13-775A-71 Extra Aloris Cutoff and Grooving Blade Holder … $365
  • 3-503A-BSL125 Aloris 1/8” Cutoff Blade … $115
  • J15-05 Taiwan Quick Change Tool Post w/5 Holders … $845
  • J15-05-1 3/4” Straight Facing Holder … $75
  • J15-05-2 3/4” V- Holder … $80
  • J15-05-4 1” Boring Bar Holder … $105
  • J15-05-41 1-1/4” Boring Bar Holder … $110
  • J15-05-5 #3 Morse Taper Holder … $85
  • J15-05-53 #4 Morse Taper Holder … $100
  • J15-05-7 3/4” Cut-Off Tool Holder … $100
  • J15-05-10 3/4” Knurling Holder … $120
  • J15-01 14” Face Plate D1-6 … $545
  • 0825323 8” 3-Jaw Setrite Universal Scroll Steel Chuck … $1,590
  • 1025323 10” 3-Jaw Setrite Universal Scroll Steel Chuck … $1,890
  • 0826323 8” 6-Jaw Setrite Universal Scroll Steel Chuck … $1,935
  • 1026323 10” 6-Jaw Setrite Universal Scroll Steel Chuck … $2,505
  • 1014423 10” 4-Jaw Independent Ductile Iron Chuck … $1,395
  • 1214423 12” 4-Jaw Independent Ductile Iron Chuck … $1,595
  • PB23-D6 PBA Front Mounted Handwheel 5C Collet Chuck … $1,475
  • 15-710 Live Center … $560
  • AR1030100T 2 Axis Acu-Rite 100 DRO … $2,525
  • AR1030200T 2 Axis Acu-Rite 200 DRO … $2,725
  • AR1030300T 2 Axis Acu-Rite 300 DRO … $2,900
  • AR1030300TTHD 2 Axis Acu-Rite 300 DRO w/Thread Assist … $3,585
  • FG1032-PK 2 Axis Fagor LED DRO … $2,725
  • FG1032-PKC 2 Axis Fagor Color DRO … $2,900
  • NW1030DP700 2 Axis Newall LED DRO … $2,900

 

Clausing Warranty:

Clausing warrantees the machine for a period of one year from the date of shipment. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.