16″ x 60″ New Sharp Lathe Model 1660LV

Price On Request
F.O.B. Factory

Chucks

Digital Readouts

Options

SKU: 27140 Categories: , Tag:

Description

This model is designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large through hole allows most 3” diameter oil pipes to be machined. The variable speed spindle allows easy change of speeds.

16″ x 60″ New Sharp Lathe Model 1660LV Specifications:

CAPACITY  
Swing Over Bed 16″
Swing Over Cross Slide 8-3/4″
Swing Over Gap 24-3/8″
Travel of Cross Slide 9-1/2″
Width of Bed 11.75″
Width of Gap 9.75″
Center Height from Top of Compound 1.9″
Distance Between Centers 60″
HEADSTOCK  
Spindle Nose Type D1-8 camlock
Spindle Bore 3-1/6″
Spindle Speeds High: 235 – 2,000 rpm
Low: 20-170 rpm
Taper of Spindle Bore MT #6
Taper of Center MT #4
THREADS AND FEEDS  
Longitudinal Feeds – in/rev (18) 0.002 – 0.032″ 
Cross Feeds – in/rev 0.0001 – 0.0094″
Inch Threads (40) 4 – 56 tpi
Metric and Module Threads 0.5 – 7mm
D.P. Threads (36) 4 – 56mm
Leadscrew Pitch, Diameter 4 tpi, 1-3/8″
CARRIAGE  
Cross Slide Width 8.7″
Compound Rest Travel 4.9″
Compound Width 4.5″
BED  
Bed Length 77″
Bed Width 11-3/4″
TAILSTOCK  
Quill Travel (graduated) 5″
Quill Diameter 2-1/4″
Quill Taper MT #4
GENERAL  
Spindle Motor  7-1/2 HP
Net Weight (approx.) 4,100 lbs
Standard Color Gray
ELECTRICAL  
Voltage 230V (*460V requires optional transformer
Phase Single or 3 phase
TOTAL POWER CONSUMPTIONS  
230V 8 KVA/25 amps
460V 8 KVA/12.5 amps

16″ x 60″ New Sharp Lathe Model 1660LV Features:

  • D1-8 camlock, 3-1/16″ hole (L, LV models)
  • Direct selection for inch/metric threads
  • One piece cast Meehanite bed
  • 7-1/2 HP spindle motor
  • Digital variable speed (DVS) on “LV” models
  • “LV” models wired at 220V only. 440V requires optional transformer. Please specify.

16″ x 60″ New Sharp Lathe Model 1660LV Standard Accessories:

  • Digital variable speed (DVS) head stock
  • 3-jaw 10″ chuck
  • Face plate (16″)
  • Steady rest w/ bronze tip (1/2″ – 6″)
  • Coolant system
  • Full length splash guard
  • American tool post
  • Threading dial
  • Center sleeve (MT #5 x 3)
  • Dead centers (MT #4 x1, MT #5 x1)
  • Follow rest (0.59″ – 2.76″)
  • Halogen work light
  • Longitudinal carriage stops
  • Machine is set only for 220V. Needs an optional transformer for 440V applications.
  • Tailstock
  • Tool kit includes: Machine manual, half nut wrench, 17m and 19m wrenches, set of 6 Allen wrenches, Phillips-head screw driver, flat head screw driver, oil can, grease gun, rear way cover bracket, 2 sets of dead center, pin for indicator, can of paint

16″ x 60″ New Sharp Lathe Model 1660LV Optional Accessories:

3J12D8 add  3-jaw 12″ chuck (QU) in lieu of the 3-jaw 10″ (standard equipment) $285.00
3J12D8  3-jaw 12″ chuck (QU)  $1,115.00
4J12D8  4-jaw chuck 12″ (QU) $1,055.00
803-1038  3-jaw chuck 10″ (Bison) $1,760.00
803-1238  3-jaw chuck 12″ (Bison) $2,710.00
853-1238  4-jaw chuck 12″ (Bison) $1,890.00
18C-01  Chuck guard (factory order only) $670.00 (installed)
TG 16 L  Tool guard (factor order only) $1,545.00
LSG-1660 L  Lead screw guard (factory order only) $1,350.00
GBS-16L  Guard behind spindle (factory order only) $50.00
UL/CSA-16  UL/CSA switch board/UL motor/CSA pump in lieu of regular version (factory order only) $1,280.00
UL compliance certificate issued by CSA Group in Los Angeles with:
1. Chuck guard (18C-01)
2. Tool guard (TG 16 L)
3. Lead screw guard (LSG-1660 L)
4. Guard behind spindle (GBS-16L)
5. UL/CSA switch board/UL motor/CSA pump in lieu of regular version (UL/CSA-16) 
$4,500.00
18C-02  Micrometer carriage stop $185.00
18C-05  4-way tool post for 16″ swing lathe $1,135.00 (installed)
18C-03  Taper attachment (factory installed) $2,830.00
18C-04  Roller jaws for steady rest $525.00
16C-01  (Extra) Steady rest 16″ for lathes (1/2-6″ capacity) $650.00
16C-09  Steady rest for 16″ lathes (4-9″ capacity) $1,290.00
16/18-D/A  Drill & arbor (JACOBS) $430.00
CXA-2511-7250  Quick change tool (7 pcs) holder set (Aloris) $2,295.00
10854  Live center – Royal (dual bearing) MT#4 $420.00
LC-MT4  Live center – MT#4 $200.00
ACC-5C  5C collet set (1/8″ to 1-1/16″ by 1/16″) 16 pcs $450.00
CCD1-8  5C collet closer set for 16/18″ lathe (Atlas) $2,050.00
440 T 10  575V transformer, please select $1,340.00
MTR 16/18L-10HP  10 HP motor in lieu of 7.5 HP with inverter $1,200.00

16″ x 60″ New Sharp Lathe Model 1660LV Digital Readout Systems:

FG-1660  Fagor 20i DRO $3,200.00 (installed)
FG-40i-1660  Fagor 40i DRO $4,150.00 (installed)
AR-1660  Acu-Rite 203S DRO $4,150.00 (installed)
NWDP-1660  Newall DP700 DRO $3,905.00 (installed)

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouse and office is located just minutes north of Columbus, Ohio. With over 25 years of experience in the industrial maFullchine tool industry, we have the knowledge and expertise to provide our customers with the best customer service support and technical expertise on all new and used machine tools to meet their needs.

We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or fill out the Request A Quote form on the right side of this page.

Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.

Terms: Check With Order

F.O.B Factory

Check us out on Twitter, Facebook, Youtube, LinkedIn and Instagram