Description
17″ x 62″ New Clausing Super Bed Mill Model SUP8BVS40 Specifications:
Table & Ways | |
Table size | 16.75″ x 62″ |
Table load capacity | 2,000 lbs. |
No. of T-slots | 4 |
T-slot width | 0.709″ |
T-slot center distance | 3.15″ |
Table ways (X axis) | Dovetail |
Bed ways (Y axis) | Square |
Column ways (Z axis) | Square |
Travels | |
Longitudinal (X axis) | 47.24″ |
Cross (Y axis) | 22.83″ |
Vertical (Z axis) | 23.62″ |
Quill diameter | 4.33″ |
Quill travel | 6″ |
Head tilt (left or right) | 90º |
Feedrate X & Y axes | 1.1-43.3 (in/min) |
Feedrate Z axis | 0.71-31 (in/min) |
X & Y axes AC motor with brake | 1 Hp |
Z axis AC motor with brake | 0.5 Hp |
Motors & Spindle | |
Spindle motor | 7.5 Hp (mechanical VS) |
Spindle speed (infinitely variable) | 70-4300 rpm |
No. of speed ranges | 2 |
Low gear range | 70-500 rpm |
High gear range | 570-4300 rpm |
Spindle taper | NMTB 40 |
Quill feed (in/revolution) | 0.0016/0.003/0.006 |
Construction | |
Height | 84.65″ |
Working width | 98.03″ |
Working depth | 80.71″ |
Width across column ways | 11.73″ |
Length of saddle on bed | 25.98″ |
Width across bed ways | 22.83″ |
Spindle nose to table | 3.93″-27.55″ |
Center of spindle to column ways | 23.62″ |
Floor to table surface | 34.3″ |
Table to column ways (min/max) | 0.79″/23.62″ |
Ball screw dia./pitch | 12.6″/2″ |
Ball screw class | C7 |
Gross weight (approximately) | 7,260 lbs. |
17″ x 62″ New Clausing Super Bed Mill Model SUP8BVS40 Standard Equipment:
- Powerful 7.5 Hp spindle drive motor
- Inverter variable speed drive with 2 speed ranges and 2 Mechanical speed ranges
- Hardened and ground spindle with NT40 taper
- Hardened and chromed quill with 5” travel
- CP4 ABEC7 angular contact spindle bearings
- Telescopic Z axis ballscrew cover
- Z axis concertina accordion way covers reduces overall travel by 50mm
- Rubber Y rear axis way covers
- Stainless steel front axis way cover
- Coolant system with pump
- Long arm halogen work light
- C7 double nut X/Y/Z axes 1.26” diameter precision ballscrew
- Hardened and ground table surface
- Ground T-slots to provide accurate reference edge
- Hardened and ground, square X/Y ways
- Turcite B coating on saddle X/Y axes ways
- Meehanite castings for superior rigidity and wear resistance
- Transformer
- Automatic lubrication system with alarm
- Tools, toolbox and parts
- Standard voltage 230 3 phase (other voltages require a transformer or special order)
17″ x 62″ New Clausing Super Bed Mill Model SUP8BVS40 Optional Accessories:
CLAUS3-A5K 5KVA Multi-Tap Transformer for 208/230/460/575 | $1,330.00 |
6VS008 Coolant/Oil Skimmer | $860.00 |
8VS011 H.D. Back Guard | $1,410.00 |
8VS012 Table Guard (factory installed) | $1,370.00 |
8VS013 Table Guard w/ Door Safety Switch (factory installed) | $1,890.00 |
8VS013F Table Guard w/ Door Safety Switch (field installed) | $2,925.00 |
6VS015 Air Power Draw Bar for 6 & 8 Series (installed) | $1,905.00 |
8VS017 CSA Electrics Canadian Specifications (factory installed non-certified) | $465.00 |
8VS018 CE/EMC Electrics w/CE Approved Contractors | $1,270.00 |
DRO Kits | |
AR52-24-200M 2-Axis Acu-Rite DRO (installed) | $3,505.00 |
AR6-52-24-200M 3-Axis w/Spindle Acu-Rite DRO (installed) | $4,170.00 |
AR6-522426300M 4-Axis Acu-Rite DRO (installed) | $5,715.00 |
NW24-48-DP700 2-Axis NewAll DRO (installed) | $3,620.00 |
NW24-24-48-DP700 3-Axis w/Column NewAll DRO (installed) | $4,685.00 |
NW6-24-24-48-DP1200 4-Axis NewAll DRO (installed) | $6,105.00 |
FG52-24-PKMC 2-Axis Fagor DRO 40i (installed) | $3,505.00 |
FG6-52-24-PKMC 3-Axis Fagor DRO 40i (installed) | $4,170.00 |
FG6-522426-PKMC 4-Axis Fagor DRO 40i (installed) | $5,715.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/