18” x 120” New Clausing Lathe C18 Variable Speed Gap Bed Model C18120VSJ

Terms:  Check with Order
Clausing C18 Series Manual Lathe accessories, features, specifications and standard equipment:

Options

DRO

SKU: 12431 Categories: ,

Description

18” x 120” New Clausing Lathe C18 Variable Speed Gap Bed Model C18120VSJ Features:

  • Geared Headstock and Control Panel: The 18” Clausing Lathe has a drive motor that drives a fully geared heavy-duty headstock giving you a total of 16 spindle speeds. All gears are hardened and ground and run in a continual bath of oil. The spindle is made of forged, quenched and tempered steel, with a case hardened spindle nose and mounted on precision taper roller bearings. The easy-to-operate control panel is designed for efficiency. Soft Start Inverter control.
  • Variable Speed Headstock and Control Panel (VS Models): The 18″ VS Clausing Lathe has a two range headstock giving you a wide selection of variable speeds.  All gears are hardened and ground and run in a continual bath of oil.  The spindle is made of forged, quenched and tempered steel, with a case hardened spindle nose and mounted on precision taper roller bearings.  The easy-to-operate control panel is designed for efficiency.
  • Spindle Brake magnetic brake system for geared head machine and inverter brake system for variable speed machine.
  • Chip Trolley chip trolley pull out for easy clean up.
  • Full Length Splash Guard: A standard feature on the 18” lathe, for clean work environment.
  • Carriage & Apron: Controls are designed for easy operation to ensure maximum productivity. Easy-to-read inch dials, a 4-way tool post, and thread dial are standard equipment on the 18” lathe.
  • Chuck Safety Guard and Traveling Chip Guard: For safe operation of the lathe and CE safety marking.
  • Bed & Bedways: The extra-wide scientifically designed bed, with tapered cross braces for fast and easy chip removal, is constructed of stabilized cast iron with bedways hardened of 42 to 47 Rc. The bed is mounted on a rigid, fabricated steel base that is specially engineered to absorb vibration and ensure smooth, accurate operation.
  • Tailstock: A heavy-duty casting design with 3” quill for maximum rigidity to support work pieces or tooling.

18” x 120” New Clausing Lathe C18 Variable Speed Gap Bed Model C18120VSJ Specifications:

Capacity  
Swing over bed 18”
Center height 9”
Swing in gap 28”
Gap length in front of faceplate 8.7”
Swing over cross slide 11.5”
Bed width 13”
Center distance 40” / 60″ / 80″ / 120″
Headstock  
Spindle bore 3.125”
Spindle nose D1-8
Spindle taper / Bushing taper 7MT/5MT
No. spindle speeds geared drive 16
Spindle speed (rpm) geared drive 20-1600
No. spindle speeds variable drive 3
Spindle speed variable drive 16-2000
Thread and Feed Box  
No. of longitudinal feeds 20
Range (inches) 0.0015-0.04
No. of cross feeds 20
Range (inches) 0.0008-0.02
No of metric threads 39
Range (mm) 0.2-14
No. of inch threads 45
Range (inches) 2-72
No. of modular threads 18
Range (mm) 0.3-3.5
No. of diametral pitch threads 21
Range (DP) 8-44
Leadscrew dia./TPI 1.26”/4
Slide and Carriage  
Cross slide travel 10.5″
Cross slide width 7.8”
Compound travel 5.1”
Compound width 5.31”
Max. tool size w/ 4-way tool post 1” x 1”
Tailstock  
Tailstock quill diameter 3”
Tailstock quill travel 7”
Tailstock taper 5MT
Motors  
Spindle motor (GH & VS) (Hp) 15
Coolant pump motor (Hp) 1/8
Dimensions Machine  
Machine height 52”
Machine width 43”
Machine length 40″/60″/80″/120″ 88″/108″/128″/168″
Machine weight 40″/60″/80″/120″ (lbs) 3,960/4,400/5,060/7,260
Dimensions Shipping  
Height 75″
Width 44″
Length 40″/60″/80″/120″ 97″/116″/136″/176″
Weight 40″/60″/80″/120″ (lbs) 4,510/5,060/5,830/8,360

Equipment:

  • Inch Dials
  • Dead Centers
  • 4-Way Tool Post
  • Coolant System
  • One-Shot Lubrication
  • Interlocking Chuck Guard
  • 12” 3-Jaw Chuck SK
  • Steady Rest w/ Rollers .98” to 5.3” Capacity
  • 5-Position Turret Type w/Micrometer Bed Stop
  • Splash Guard
  • Leadscrew Cover
  • Thread Dial Indicator
  • T-Slotted Top Slide
  • Spindle Brake Magnetic Geared Head
  • Spindle Brake Inverter Variable Speed Head
  • Roll Out Chip Pan
  • Chip Guard
  • LED Work Light
  • CE Electrics
  • Tool Box and Manual

Optional Equipment:

Work Holding Options  
J18-02 Follower Rest w/Roller Fingers .59” to 3.3” $1,290.00
J18-13 Extra Steady Rest w/Roller Fingers .98” to 5.3”  $1,570.00
Tool Post Options  
J18-05A Aloris CA Tool Post w/4 Holders (2 sided) $1,545.00
15-775A-1 Extra Aloris Straight Holder 1” $160.00
15-775A-1S Extra Aloris Straight Holder 1-1/4” $235.00
15-775A-2 Extra V-Holder 1” Block 13/16” Bar $175.00
15-775A-4D Extra Aloris Boring Bar Holder 1-1/4” $230.00
15-775A-41D Extra Aloris Boring Bar Holder 1-1/2” $265.00
15-775A-5 Extra Aloris #3 Morse Taper Holder $220.00
15-775A-71 Extra Aloris Cutoff and Grooving Blade Holder $375.00
15-775A-BSL187 Aloris 3/16” Cutoff Blade $135.00
Chucking Options  
J18-01 17” Face Plate D1-8 $1,250.00
1025324 10” 3-Jaw Setrite Universal Scroll Steel Chuck $2.370.00
1225324 12” 3-Jaw Setrite Universal Scroll Steel Chuck $3,245.00
1026324 10” 6-Jaw Setrite Universal Scroll Steel Chuck $3,390.00
1226324 10” 6-Jaw Setrite Universal Scroll Steel Chuck $4,890.00
1214424 12” 4-Jaw Independent Ductile Iron Chuck $2,025.00
1414524 14” 4-Jaw Independent Ductile Iron Chuck $2,450.00
PB23-D8 PBA Front Mounted Handwheel 5C Collet Chuck $1,645.00
0123-R-(state size) Individual 5C Round Collet Inch $30.00
0123-R-(state size) Individual 5C Round Collet Metric $30.00
0123-SET-4 1/16″-1 1/16″ by 64ths (inch set) $1,850.00
0123-SET-5 1/16″-1 1/16″ by 32nds (inch set) $960.00
0123-SET-6 1/16″-1 1/16″ by 16ths (inch set) $500.00
0123-SET-7 1/8″-1″ by 8ths (inch set) $235.00
0123-SET-1 3mm-27mm by .5mm (metric set) $1,400.00
0123-SET-2 3mm-27mm by 1mm (metric set) $725.00
7659 18pc 5C Collet Rack $55.00
Tailstock Options  
17-910 Live Center $980.00
J18-91 2 Speed Tailstock (factory installed) $700.00
Miscellaneous Options  
J18-06 Taper Attachment $3,315.00
Taper Installation $300.00 NET
J18-90 Rapid Feed Attachment Z Axis Longitudinal (factory install) $3,775.00
DRO  
AR12M40100T 2 Axis Acu-Rite 100 DRO  $5,400.00
AR12M40200T 2 Axis Acu-Rite 200 DRO  $5,625.00
AR12M40300T 2 Axis Acu-Rite 300 DRO  $6,125.00
AR12M40300TTHD 2 Axis Acu-Rite 300 DRO w/Thread Assist $7,150.00
FG1240-PK 2 Axis Fagor LED DRO  $5,400.00
FG1240-PKC 2 Axis Fagor Color DRO  $5,625.00
NW1240DP700 2 Axis Newall LED DRO  $5,625.00
Installation of 2 Axis System $450.00
Installation of 2 Axis w/Threading System $600.00
Installation of Taper Attachment $300.00

Clausing Warranty:

Clausing warrantees the machine for a period of one year from the date of shipment. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.