18" x 22" New Marvel Vertical Tilt Frame Bandsaw Series 8-Mark-III

18″ x 22″ New Marvel Vertical Tilt Frame Band Saw Series 8-Mark-III USA Made!

• 60˚ Tilt Left & Right
• Auto Head Retract
• Mechanical Feed
• 1-1/4″ Blade Size
• Optional Power Tilt – $2,600.00

Terms: Check with Order


SKU: 12892 Categories: , ,


18″ x 22″ New Marvel Vertical Tilt Frame Band Saw Series 8-Mark-III Specifications:

Cutting Capacity (Standard Column with 3° Forward Cant)  
Round 0° (diameter)
Round at 45° right (diameter)
Round at 45° left (diameter)
Round at 60° right (diameter)
Round at 60° left (diameter)
Rectangle at 0° (W x H)
17.5″ x 22″ 
Rectangle at 45° right (W x H)
17.5″ x 14.5″
Rectangle at 45° left (W x H)
17.5″ x 13″
Rectangle at 60° right (W x H)
17.5″ x 9.7″
Rectangle at 60° left (W x H)
17.5″ x 7.3″
Maximum vise opening at 45° left
Maximum vise opening at 60° left
Work load capacity
4,996 lbs
Saw Blade
Blade size (L x T x W)
15’4″ x 0.042″ x 1-1/4″
Blade speed
50-450ft/min by Inverter
Tension control
Pneumatic (tightening by air ratchet)
Blade Control
Cutting control
Clutch power feed
Blade feed force
0 to 250 lbs
Saw blade
5 HP
Sawhead fast feed
1/4 HP
Cutting fluid pump
1/8 HP
Tilt gear motor
1/15 HP
Power Requirements
Power supply voltage
AC230V +- 10% or AC460V +- 10%
3PH, 60 Hz, voltage must be specified when ordering
Power requirement
Cutting Fluid
Tank capacity
19.8 gal
Pump type
Air Supply
Air supply
87 – 145 psi
Air set pressure
80 psi
Chip disposal
Feed Table
Feed mechanism
Feed stroke
Machine dimensions (W x L x H)
94.7″ x 99.2″ x 90.8″
Table Height (Above Floor)
Machine Weight
2,867 lbs


18″ x 22″ New Marvel Vertical Tilt Frame Band Saw Series 8-Mark-III Features:

  • SPEED RANGE: 50 – 450 fpm (15 – 137 m/min) infinitely variable with inverter drive
  • FRONT-MOUNTED SPEED CONTROL: Allows blade speed to be adjusted from operator’s control station
  • FEED RANGE: 0-140 lbs (64 kgf) infinitely variable direct reading scale balance beam on the 8-Mark-II. 0-250 lbs (113 kgf) infinitely variable with control on operator’s panel and Automatic Column Return. Column feed is mechanical with Marvel clutch power feed on 8-Mark-III
  • T-SLOTTED WORK TABLE: Work area 24.25″ x 33″; table height 34.5″; four machined T-slots accept 0.625″ T-Bolts on 8-Mark-II. Work area 24.25″ x 33″; table height 38″; two machined T-slots on 8-Mark-III.
  • 0° – 3° CANTED COLUMN: Adjustable 0 or 3° forward approach angle, for notching, or increased efficiency in cutting of structural materials (only available on 8-Mark-III). *8-Mark-II is not adjustable and is available in either 0° or optional 3° cant*
  • MITER CUTTING: Column and blade tilt up to 45° on 8-Mark-II and up to 60° right and left of vertical on the 8-Mark-III. Optional Powered Tilt only available on the 8-Mark-III
  • QUICK-ACTION VISE: Maximum opening 18”. Jaws can be shifted to either right or left side of blade. Jaws are 6” high, 12” wide
  • AUTOMATIC STOPS: Adjustable stops can be pre-set to stop advance and return of blade, and also to stop motor at any location within the 18” travel of the blade (available on 8-Mark-III). *8-Mark-II doesn’t have auto return feature*
  • FLUSHING HOSE: Washes chips from hard to get at places reducing clean-up time
  • POWER CHIP BRUSH: Together with blade wipers and flood coolant deep blade teeth free of chips
  • EAGLE BEAK VTR BLADE: Eagle Beak VTR blade with 3/6 tooth pitch. This is the standard blade that is included with machine purchase


18″ x 22″ New Marvel Vertical Tilt Frame Band Saw Series 8-Mark-III Optional Accessories:

M6 High Column  
8SP01337 Laser Light  
DRO Digital Tilt Readout  
M3M Powered Column Tilt  
E4 Second Standard Vise  
ML2 Mist Lube-Automatic  
M9A Variable Vise Pressure  
8/F055 Dead Roller Conveyor  
E14 Air Powered Vise


About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/

All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.