Description
This model is designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large through hole allows most 3” diameter oil pipes to be machined. The variable speed spindle allows easy change of speeds.
18″ x 60″ New Sharp Lathe Model 1860LV Specifications:
CAPACITY | |
Swing Over Bed | 18.5″ |
Swing Over Cross Slide | 11″ |
Center Height | 9.25″ |
Swing Over Gap | 27-1/8″ |
Width of Gap | 11.75″ |
Center Height from Top of Compound | 1.9″ |
Distance Between Centers | 60″ |
HEADSTOCK | |
Spindle Nose Type | D1-8 camlock |
Spindle Bore | 3-1/6″ |
Spindle Speeds (digital variable speed) | 20 – 2,000 rpm |
Taper of Spindle Bore | MT #6 |
Taper of Center | MT #5 |
THREADS AND FEEDS | |
Longitudinal Feeds – in/rev (18) | 0.002 – 0.032″ |
Cross Feeds – in/rev (#) | 0.0001 – 0.0094″ (12) |
Inch Threads (#) | 4 – 56 tpi (36) |
Metric and Module Threads (#) | 0.5 – 7mm (17) |
D.P. Threads (36) | 4 – 56mm |
Leadscrew Pitch, Diameter | 4 tpi, 1-3/8″ |
CARRIAGE | |
Cross Slide Travel | 9-7/8″ |
Compound Rest Travel | 5.3″ |
Compound Width | 5.0″ |
BED | |
Bed Length | 79″ |
Bed Width | 11-3/4″ |
TAILSTOCK | |
Quill Travel (graduated) | 5-1/2″ |
Quill Diameter | 2-11/16″ |
Quill Taper | MT #4 |
GENERAL | |
Spindle Motor (220V or 440V, 60, 3) | 7-1/2 HP |
Net Weight (approx.) | 4,500 lbs |
Dimensions (l x w x h) | 104.3″ x 31.9″ x 48″ |
Standard Color | Gray |
ELECTRICAL | |
Voltage (*460V requires optional transformer) | 230V |
Phase | Single or 3 phase |
TOTAL POWER CONSUMPTIONS | |
230V | 8 KVA/25 amps |
460V | 8 KVA/12.5 amps |
18″ x 60″ New Sharp Lathe Model 1860LV Features:
- D1-8 camlock, 3-1/16″ hole
- Direct selection for inch/metric threads
- One piece cast Meehanite bed
- 7-1/2 HP spindle motor
- Digital variable speed (20-2,000 rpm)
- Digital variable head on “LV” models wired at 220V only. 440V optional.
18″ x 60″ New Sharp Lathe Model 1860LV Standard Accessories:
- 3-jaw 10″ chuck
- Face plate (16″)
- Steady rest (1/2″ – 6″)
- Follow rest (0.59″ – 3.15″)
- Coolant system
- Full length splash guard
- American tool post
- Halogen work light
- Longitudinal carriage stops
- Machine is set for 220V. Needs an optional transformer 440V applications.
- Tailstock
- Tool kit includes: Machine manual, half nut wrench, 17m and 19m wrenches, set of 6 Allen wrenches, Phillips-head screw driver, flat head screw driver, oil can, grease gun, rear way cover bracket, 2 sets of dead center, pin for indicator, can of paint
Optional Accessories:
3J12D8 add 3-jaw 12″ chuck (QU) in lieu of the 3-jaw 10″ (standard equipment) | $285.00 |
3J12D8 3-jaw 12″ chuck (QU) | $1,115.00 |
4J12D8 4-jaw chuck 12″ (QU) | $1,055.00 |
803-1038 3-jaw chuck 10″ (Bison) | $1,760.00 |
803-1238 3-jaw chuck 12″ (Bison) | $2,710.00 |
853-1238 4-jaw chuck 12″ (Bison) | $1,890.00 |
18C-01 Chuck guard (factory order only) | $670.00 (installed) |
TG 16 L Tool guard (factory order only) | $1,545.00 |
LSG-1660 L Lead screw guard (factory order only) | $1,350.00 |
GBS-16L Guard behind spindle (factory order only) | $50.00 |
UL/CSA-16 UL/CSA switch board/UL motor/CSA pump in lieu of regular version (factory order only) | $1,280.00 |
UL compliance certificate issued by CSA Group in Los Angeles with: 1. Chuck guard (18C-01) 2. Tool guard (TG 16 L) 3. Lead screw guard (LSG-1660 L) 4. Guard behind spindle (GBS-16L) 5. UL/CSA switch board/UL motor/CSA pump in lieu of regular version (UL/CSA-16) |
$4,500.00 |
18C-02 Micrometer carriage stop | $185.00 |
18C-05 4-way tool post for 16″ swing lathe | $1,135.00 (installed) |
18C-03 Taper attachment (factory installed) | $2,830.00 |
18C-04 Roller jaws for steady rest | $525.00 |
16C-01 (Extra) Steady rest 16″ for lathes (1/2-6″ capacity) | $650.00 |
16C-09 Steady rest for 16″ lathes (4-9″ capacity) | $1,290.00 |
16/18-D/A Drill & arbor (JACOBS) | $430.00 |
CXA-2511-7250 Quick change tool (7 pcs) holder set (Aloris) | $2,295.00 |
10854 Live center – Royal (dual bearing) MT#4 | $420.00 |
LC-MT4 Live center – MT#4 | $200.00 |
ACC-5C 5C collet set (1/8″ to 1-1/16″ by 1/16″) 16 pcs | $450.00 |
CCD1-8 5C collet closer set for 16/18″ lathe (Atlas) | $2,050.00 |
440 T 10 575V transformer, please select | $1,340.00 |
MTR 16/18L-10HP 10 HP motor in lieu of 7.5 HP & inverter | $2,500.00 |
18″ x 60″ New Sharp Lathe Model 1860LV Digital Readout Systems:
FG-1860 Fagor 20i DRO | $3,200.00 (installed) |
FG-40i-1860 Fagor 40i DRO | $4,150.00 (installed) |
AR-1860 Acu-Rite 203S DRO | $4,150.00 (installed) |
NWDP-1860 Newall DP700 DRO | $3,905.00 (installed) |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.