20″ New DoAll Vertical Band Saw Model 2012-VH

Terms: Check with Order

Options

SKU: 13045 Categories: ,

Description

20″ x 12″ New DoAll Vertical Band Saw Model 2012-VH features a hydraulically powered work table with 12″ table stroke. These upright, variable hydraulic controlled, metal cutting band saws are among the most versatile sawing machines on the market today. The 20″ x 12″ DoAll vertical contour band saw is widely used in machine shops, maintenance departments, schools and other areas where cutting a wide variety of materials is required.

20″ New DoAll Vertical Band Saw Model 2012-VH Specifications:

Specifications  
Capacity Inches
Maximum width 20″
Maximum height 12″
Table tilt positive 10°
Table tilt negative 45°
Saw Blade  
Band width capacity 1/8″ – 1″
Band length 154″
Band Drive  
Motor 3 Hp
Band Speed Low range: 30-320 fpm
High range: 550-5,500 fpm
Band Tension Manual
Hydraulic motor 1.5 Hp
Hydraulic tank 3 gal
General  
Floor Space Dimensions W x L x H 56″ x 44″ x 80″
Material pass height 39″
Machine weight 1,900 lbs
Electrical  
Voltage requirement (Wye configuration-must specify at order placement) 208V, 230V, or 460V-60Hz-3ph
Total Amp Draw (FLA) 14.3 (208)
13.7 (230)
9.8 (460)

 

20″ New DoAll Vertical Band Saw Model 2012-VH Standard Equipment:

  • Table tilt to 45 degrees negative-10 degrees positive
  • Table 26.5″ x 33.5″
  • Two T-Slots 1/2″
  • 20″ aluminum flanged, tapered band wheels with rubber tires
  • Upper wheel adjustment 3″
  • Operator controls mounted on column
  • One set of saw guide blocks w/carbide backup for bands 1/8″ to 1″
  • One set of metal saw guide inserts for bands 1/4″, 3/8″, and 1/2″, 3/4″, and 1″
  • Band wheel brush
  • Variable frequency band drive
  • Work light
  • Hydraulic reservoir
  • Manual band tension with indicator
  • Post elevating hand wheel
  • Chip box
  • Chip blower (plant air required)
  • Saw blade guards
  • Band door interlocks
  • Operation and parts manuals on USB stick
  • Recommended job selector
  • One (1) complimentary DoAll Bi Metal saw blade
  • Insert setting gages with wrench and trunnion wrench

20″ New DoAll Vertical Band Saw Model 2012-VH Optional Accessories:

299473 Extended 18″ hydraulic table stroke assembly $7,339
HMD-36 Extended traverse work table: 1100 lb. capacity, four (4) 2″ T-Slots, 34 x 42″ table area, reduces work height by approximately 4″ $27,611
40363 Work holding vise to fit table “T” slots $6,702
299551 DBW-15 welder with grinder, column mounted, for 240 volts and below $4,119
299550 DBW-15 welder with grinder, column mounted, for 460 volt $4,119
Extended work height 6 inch increments-call for quote Call
5-013007 Work holding jaw with handles $404
420288 Band mist lubricator (80 psi plant air required) $1,860
402080 Disk cutting attachment: capacity 2-1/2″ to 30″ diameter $2,235
226028 Magnetic wand chip remover $195
1012862 Flood coolant $5,263
80161 Extra set of heavy duty (high speed) saw guide blocks with carbide backup for 1/4″ to 1″ bands $933
Additional set of hardened tool steel reversible saw guide inserts (set of 4) for any single band width  
80041 1/4″ $98
80042 3/8″ $98
80043 1/2″ $98
80044 5/8″ $98
80045 3/4″ $98
80046 1″ $98
Optional tungsten-carbide, single-faced saw guide inserts (set of 4) for any single band width  
80100 1/4″ $583
80101 3/8″ $583
80102 1/2″ $583
80103 5/8″ $583
80104 3/4″ $583
80105 1″ $583
80047 1″ $2,163
299998 Additional USB stick of manuals $92
NRTL A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards $3,500
SVC CHARGE LABOR Five (5) hours installation and operator training $750
Warranty DoALL Cut Above 10 Year Warranty Annual Investment $840
DoALL Saw Blades and Coolant  
1200025 Starter Kit of Six Pack Blades Consist of 3 each Silencer GP 5-8, and 1 of each Silencer GP 6, 6-10, 8-12 $310
21200045 5 Gal. Pail of AL-2000 Mist Coolant $240
24000001 Tool-Saver lubricant stick $14

 

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/

All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.