20″ x 25″ x 20″ New Amada Vertical Bandsaw Model VT5063S (Marvel 2125APCS) Specifications:
|Capacity Round 0°||20″|
|Capacity Round 45°||17″|
|Capacity Round 60°||11.25″|
|Capacity Rectangle 0°||20″ x 25″|
|Capacity Rectangle 45°||20″ x 17″|
|Capacity Rectangle 60°||20″ x 11.25″|
|Maximum Vise Opening||20.25″|
|Work Load Capacity||8,000 lbs|
|Saw Blade Dimension||17’6″ x 0.042″ x 1-1/4″|
|Blade Speed||30-500 Ft./min by inverter|
|Blade Cutting Control||Direct Force Sensing Electrical Ball Screw Feed with PC3 Programmable Control|
|Blade Feed Force||0-300 lbs|
|Vise Operation||Main Vise|
|Vise Control||Hydraulic Full Stroking with 9-12 High x 15″ Wide 60 degree faceplates|
Hydraulic, full stroking with 9-12″ high x 15″ wide 60° face plates. Optional variable vise pressure available.
7.5 HP Saw Blade Motor
5 HP Hydraulic Pump
1/8 HP Cutting Fluid Pump
1/15 HP Tilt Gear
|Power Supply Voltage||
AC230V±10% or AC460V±10%, 3 PH, 60 Hz
Voltage must be specified when ordering
|Cutting Fluid Tank Capacity||
|Standard Left-to-right Work Entry||
Opposite Hand or Right-to-Left work entry available.
|Hydraulic Tank Capacity||
|Standard Feed Vise Index Mechanism||
AC Servo Motor and Ball Screw
23″ Plus length of parts
|Optional Shuttle Table Feed Mechanism||
Automatic service drive index with linear guide system
8, 13 and 18 ft
94.7″ x 99.2″ x 90.8″
20″ x 25″ x 20″ New Amada Vertical Bandsaw Model VT5063S (Marvel 2125APCS) Features:
Tilting ColumnFor miter cutting up to 60° left and right of vertical. Now with Electronic Tilt, the column is electrically powered with encoder feedback and PC3 touch screen controller for precision miter positioning.
0° – 3° Canted ColumnStandard 3° forward approach angle, for increased efficiency in the cutting of structural materials. NOTE: If the non-canted 0° option is required with a 1.25” blade, the VT5063SW (2150APC) must be purchased. The VT5063SW (2150APC) order must specify that the 1.25” blade is required with the non-canted option.
Blade GuidePatent-pending Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self-tensioning design.
Upper Blade Guide ArmHydraulically positioned and locking, controlled by a selector switch at the operator’s station.
Flushing HoseWashes chips from hard to get at places reducing clean-up time.
Work-Rest RollersTwo turned ball-bearing rollers, one on the entry side and one on the discharge side of the machine bed.
VisesHydraulic, full stroking with 9-1/2” high x 15” wide 60° faceplates. Removable face plates without tools to allow for both miters and 90° at the blade.
Automatic Bar FeedThe patented automatic bar feed design features a 48″ stroke length with indexing speeds of up to 60fpm. The bar feed is servo driven with encoder feedback, and combines precision double ball screws with preloaded recirculating linear guides, resulting in positioning accuracy of +/- .005″ per index.Optional long-stroke shuttles.
PC3 Programmable Control®Provides a Programmable Logic Control Unit with a 12” color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library.
20″ x 25″ x 20″ New Amada Vertical Bandsaw Model VT5063S (Marvel 2125APCS) Optional Accessories:
|M8 – Powered Chip Conveyor 144||$5,050|
|M9A – Variable Vise Pressure Control||$550|
|F12L – Work-Lift Roller on Left Side||$1,520|
|F4 – Second Machine Vise, Complete||$2,650|
|F8 – Hydraulic Hold-Down – Machine||$2,550|
|F8A – Hydraulic Hold-Down – Shuttle||$2,620|
|ML2 – Mist Lube-Automatic||$1,400|
|SGA1 – Smart Guide Arm||$1,500|
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouse and office is located just minutes north of Columbus, Ohio. With over 25 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or fill out the Request A Quote form on the right side of this page.
Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Terms: Check With Order