Marvel Vertical Bandsaw Model 2150A-PC3S-60

20″ x 25″ x 20″ New Marvel Vertical Bandsaw Model 2150A-PC3S-60

SKU: 12890 Categories: , ,

Description

Marvel Vertical Bandsaw Model 2150A-PC3S-60 Tilt Frame Specifications:

Capacity: Nominal 20″ x 25″, 20″ Round
Capacity: 45° 20″ x 17″, 17″ Round
Capacity: 60° 20″ x 11.25″, 11.25″ Round
Blade Drive Electric with sensor-less vector control for smooth acceleration and full torque.
Tilting Column For miter cutting up to 60° left and right of vertical. Hydraulically powered cam link design includes built in protractor with Amada Marvel PC3 controller.
3 Degree Canted Column Standard 3° forward approach angle for increased efficiency in cutting of structural materials.
Feed Force Direct Force Sensing Electrical Ball Screw Feed which combines more consistent feed force with greater control, 0 – 300 lbs, column travels on re-circulating linear ball ways. Feed pressure can be automatically set when material is selected, or adjusted manually using the PC3 touch screen.
Blade Guides Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self tensioning design.
Blade Tension Hydraulically controlled, 45,000 psi. max. Machine equipped with automatic blade break/blade stall shut-off switch.
Upper Blade Guide Arm Hydraulically positioned locking, controlled using the PC3 touch screen
Vises
Hydraulic, full stroking with 9-12″ high x 15″ wide 60° face plates. Optional variable vise pressure available.
Coolant System
Build-in with flood system, available with Drop Lubrication system, including chip pan with chip removal ramp.
Work-Rest Rollers
Two turned ball bearing rollers, one on the entry side and one on the discharge side of the machine bed.
Flushing Hose
Washes away chips from hard-to-get places reducing clean-up time.
Automatic Bar Feed
The Automatic Bar Feed design features a 48″ stroke length with indexing speeds of up to 60 ft./min., and creep speeds of 33 in./min. The bar feed vise is servo driven with encoder feedback, and combines precision double ball screws with preloaded recirculating linear guides, resulting in positioning accuracy of ± .005″ per index. The vise itself is hydraulically clamped to prevent material slippage. Optional outboard and second machine vises are available.
Amada Marvel PC3 Programmable Control
Provides a Programmable Logic Control Unit with a 10″ color, touch screen display. The control features graphical part programming with memor for up to 500 jobs and parts, as well as a material selection chart and customizable material library. both blade speed and feed force are automatically set according to material type for optimal cutting performance. Job programming consists of setting the cut-off length, angle and number of pieces to be cut. Additoinal features include Inch/Metric capability, out-of-stock shut down device, a fast cut job option and expanded memory storage using removable media. Also includes Jammed Blade Protection that senses resistance as the column returns and stops motion to prevent blade damage. Material can also be fed through the machine manually in both directions using the hydraulic.
Standard Left-to-right Work Entry
Opposite Hand or Right-to-Left work entry available.
Motors
Coolant Pump: 1/8 H.P., Hydraulic Pump: 5 H.P., Main Drive: 7.5 H.P.
Controls
IEC fused disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage control to all push buttons at operator’s control panel and machine lighting circuits. PLC control and drives mounted in moisture-tight compartment with vibration isolation mountings. Electrical Equipment conforms to National Electrical Code NFPA 79. The Electrical Control Panel is U.L. Labeled.

 

Marvel Vertical Bandsaw Model 2150A-PC3S-60 Tilt Frame Features:

  • Blade Drive: Electric with sensorless vector control for smooth acceleration and full torque.
  • Speed Range: Infinitely variable: 500 FPM (9 to 152 m/min), 10 HP Standard. Blade speed can be automatically set when material is selected.
  • Tilting Column: For miter cutting up to 60 o left and right of vertical. Electronic tilt- The column is electrically powered, chain driven, with encoder feedback and AMADA MARVELPC3 touch screen controller for precision miter positioning.
  • 3° Canted Column: Standard 3-degree forward approach angle for increased efficiency in cutting of structural materials.(Non Canted option available for $2,100.00 additional) If the non-canted option is required with a 1.25” blade, the 2150M or 2150PC3 order must specify that the 1.25” blade is required with the non-canted option.
  • Feed Force: Direct Force Sensing Electric Ball Screw Feed 0 – 350 lbs. (1560 N); column travels on recirculating linear ball ways. Feed pressure can be automatically set when material is selected.
  • Blade: 18’39” long x 1.5″ wide, .05″. One Welded-Edge Band is furnished with each machine as part of standard start-up supplies.
  • Blade Guides: Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self tensioning design.
  • Blade Tension: Hydraulically controlled, 45,000 psi. max. (310 MPa). Machine equipped with automatic blade break/blade stall shut-off switch.
  • Upper Blade Guide Arm: Hydraulically positioned and locking, controlled by selector switch at operator’s station.
  • Vises: Hydraulic, full stroking with 9-1/2” high x 15” wide 60 o faceplates. Optional variable vise pressure available (Option Code M9A).
  • Coolant System: Built-in with Flood system (60 Gallon Capacity), available with Drop Lubrication system (requires compressed air connection) (Option codes ML1 & ML2), including chip pan with chip removal ramp (optional Manual or power Chip Conveyors available).
  • Work-Rest Rollers: Two turned ball bearing rollers, one on the entry side and one on the discharge side of the machine bed.
  • Flushing Hose: Washes away chips from hard-to-get-at places reducing clean-up time.
  • Automatic Bar Feed: The Automatic Bar Feed design features a 48” stroke length with indexing speeds of up to 60 ft./min., and creep speeds of 33 in../min. The bar feed vise is servo driven with encoder feedback, and combines precision double ball screws with preloaded recirculating linear guides, resulting in positioning accuracy of +/- .005” per index. The vise itself is hydraulically clamped to prevent material slippage. Optional outboard and second machine vises are available (must specify right or left hand machine configuration at the time of order – Option Codes F3 & F4).
  • AMADA MARVELPC3 PROGRAMMABLE CONTROL®: Provides a Programmable Logic Control Unit with a 12” color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library. Both blade speed and feed force are automatically set according to material type for optimal cutting performance. Job programming consists of setting the cut-off length, angle and number of pieces to be cut. Additional features include Inch/Metric capability, out-of-stock shut down device, a fast cut job option and expanded memory storage using removable media. Also includes Jammed Blade Protection that senses resistance as the column returns and stops to prevent blade damage. Material can also be fed through the machine manually in both directions using the hydraulic shuttle vise. Blade can be stopped with all other power functions operative.
  • Standard Left-to-Right Work Entry: Opposite Hand – RIGHT-TO-LEFT work entry available (Modification M4A).
  • Table Height: 40”
  • Motors: Main Drive: 10 H.P., 1800 RPM, totally enclosed, fan cooled, ball bearing.
    Coolant Pump: 1/8 H.P. (.1 kW), I.P. 54 Rating, totally enclosed motor built-in integrally.
    Hydraulic Pump: 5 H.P. (3.7 kW), 1800 RPM, totally enclosed fan cooled, ball bearing, system pressure 900 psi (6.2 MPa).
  • Controls: IEC fused disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage (24 volts DC) control to all push buttons at operator’s control panel and machine lighting circuits. PLC control and drives mounted in moisture tight compartment with vibration isolation mountings. Electrical Equipment conforms to National Electrical Code NFPA 79.  The Electrical Control Panel is U.L. Labeled.
  • Notice: This quotation is based on the assumption that the end user’s electrical power supply conforms to National Electrical Code NFPA No. 79-2012, section 4.3 at the machine terminals.
  • Warning: Failure of the end user’s electrical supply to conform to the above standard can hinder machine performance and may require the addition of extra cost components not included with the standard machine. Repair and replacement of components damaged as a result of an inadequate power supply are not covered by the manufacturer’s warranty.
  • Standard Machine Color: Machine Tool Gray
  • Start-up Supplies included with each machine:
    Hydraulic Oil: 10 gallons (38 liters) in machine.
    Bandsaw Blades: One (1) Welded-Edge Blade.
    Manufacturer’s Technical Data: Two (2) sets consisting of parts list, operating and maintenance instructions, installation plan, wiring, elementary electric and hydraulic diagrams, and electrical and hydraulic component list.

Optional Accessories

PC3SBN: Bullet Nose Cutting … $ 2,950.00
M4A: Opposite Hand Work Entry … $ 1,455.00
M8M: (2125DA00341) Manual (Hand Crank) Chip Conveyor … $ 3,790.00
M8: (2125DA00342) Powered Chip Conveyor … $ 4,940.00
M9A (2125AB00332): Variable Vise Pressure Control … $ 775.00

Supplementary Equipment:

F12L: Work-Lift Roller on Left Side of Machine Bed … $ 1,450.00
F12R: Work-Lift Roller on Right Side of Machine Bed … $ 1,450.00
F3: (2125FD00351) Outboard Vise … $ 4,250.00
F4: Second Machine Vise – Complete … $ 2,695.00
F5: 45º Vise Jaw Faceplates … $ 895.00
F6: Square (90°) Vise Jaws … $1,395.00

F7: High Square (90°) Vise Jaws … $ 1,575.00
F7-SH: High Square (90°) Faceplates for Shuttle Vise (LS) … $ 1,525.00
F8: Hydraulic Hold-Down – Machine … $ 2,395.00
F8A: Hydraulic Hold-Downs – Shuttle – Standard for use with 48” Shuttle … $ 2,525.00

F8AX: Hydraulic Hold-Downs, for use with Extended Feed Shuttles … $ 3,950.00
ML1: Mist Lube – Manual … $ 1,090.00
ML2: Mist Lube – Automatic … $ 1,850.00
SGA1 (2125BD00431): Smart Guide Arm … $ 1,485.00
00046: Laser Alignment Light … $ 2,195.00

Extended Automatic Feed Systems:

LS8: Extended Automatic Feed System with 8 Foot Maximum Single Index … $ 14,450.00
LS13: Extended Automatic Feed System with 13 Foot Maximum Single Index … $ 21,995.00
LS18: Extended Automatic Feed System with 18 Foot Maximum Single Index … $ 26,250.00

Dead Roller (NON-POWERED) Roller Table Sections:

F053: First Section Dead Roller Table, 5’ 0” (1524 mm) Long … $ 4,550.00
F053-FS: First Section Free Standing Dead Roller Table, 5’ 0” (1524 mm) Long … $  5,775.00
F106: First Section Dead Roller Table, 10’ 0” (3048 mm) Long … $ 5,495.00
F106FS: First Section Free Standing Dead Roller Table, 10’ 0” (3048 mm) Long … $  6,800.00
F106MG: First Section Dead Roller Table with Manual Gauge 10’ 0” (3048 mm) Long … $ 20,275.00

F106MHG: First Section Dead Roller Table with Manually Positioned Hydraulic Lift Gauge 10’ 0”(3048 mm) Long … $ 23,850.00
X053: Extension Dead Roller Table 5’ 0” (1524 mm) Long … $ 3,650.00
X053FS: Extension Free Standing Dead Roller Table 5’ 0” (1524 mm) Long … $ 3,550.00
X106: Extension Dead Roller Table, 10’ 0” (3048 mm) Long … $ 4,850.00
X106FS: Extension Free Standing Dead Roller Table, 10’ 0” (3048 mm) Long … $ 4,995.00
X053GR: Extension Dead Roller Table, 5′ (1524 mm) Long with Gauging … $ 4,650.00

X106GR: Extension Dead Roller Table, 10′ (3048 mm) Long with Gauging … $ 6,395.00
AG: Aligning Guide … $ 1,550.00
FP: Flush Plates … $ 95.00

Live (POWER DRIVEN) Roller-Table Sections:

EPF106: First Section Live Roller Table 10’ 0” (3048 mm) Long … $ 19,250.00
APRI: Automatic Power Roller Extension … $ 5,250.00
EPF106HG: First Section Live Roller Table with Programmable Hydraulic Gauge 10’ 0” (3048 mm) Long … $ 39,950.00
EPF106MHG: Live Roller Table with MANUALLY Positioned Hydraulic Lifting Gauge 10′ (3048 mm) Long … $ 33,750.00
PX053: Live Roller Table 5’ ’0” (1524 mm) Long … $ 5,495.00
PX106: Extension Live Roller Table 10’ 0” (3048 mm) Long … $ 8,495.00

PX053GR: Extension Live Roller Table 5′ (1524 mm) Long with Gauging … $ 6,450.00
PX106GR: Extension Live Roller Table 10′ (3048 mm) Long with Gauging … $ 9,495.00
EJ: Work Ejector, 10’0” (3,048mm) Long … $ 18,125.00
EJX05: Extension Work Ejector 5’0” (1,524mm) Long … 9,350.00
EJX10: Extension Work Ejector 10’0” (3,048mm) Long … $ 11,350.00

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouse and office is located just minutes north of Columbus, Ohio. With over 25 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service support and technical expertise on all new and used machine tools to meet their needs.

We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or fill out the Request A Quote form on the right side of this page.

Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.

Terms: Check With Order

F.O.B Factory

Check us out on Twitter, Facebook, Youtube, LinkedIn and Instagram

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.