Description
This is a large size surface grinder suitable for grinding big, heavy work piece. To ensure smooth and steady movements, the cross travel is designed by having the vertical column travels in and out instead of the saddle. The table and column travels on T-shaped one piece casting base with TURCITE coated sideways.
20″ x 60″ New Sharp Traveling Column Surface Grinder Model SHT-2060-2A Specifications:
| Capacity | |
| Table Travel | 21″ x 65″ |
| Spindle Center to Table Surface | 28″ |
| Table | |
| Working Surface (W x L) | 20″ x 60″ |
| Longitudinal Hydraulic Table Feed | 39.37 – 984.25 in./min |
| Feed | |
| Intermittent Cross Feed | 0.04 – 0.6 ipm |
| Continues Cross Feed (Ballscrew) | 39 ipm |
| Number of Graduations on Dial | 200 |
| Feed per Graduation | 0.001″ |
| Feed per Revolution | 0.200″ |
| Vertical Travel | |
| Number of Graduations | 100 |
| Feed per Graduation | 0.0001″ |
| Feed per Revolution | 0.010″ |
| Rapid Downfeed (optional) | 11.8 ipm |
| Motor | |
| Wheel Size (OD x Width x ID) | 14″ x 2″ x 5″ |
| Spindle Motor | 10 HP |
| General Information | |
| Approximate Weight | 18,800 lbs |
| Machine Dimensions | 17.5 x 7.5 x 8.5 ft |
| Total Power Consumption | |
| 220V | 15.84 KVA/68 amps |
| 440V | 15.84 KVA/34 amps |
20″ x 60″ New Sharp Traveling Column Surface Grinder Model SHT-2060-2A Features:
- For cross travel, the vertical column travels in and out instead of a saddle. This design offers more accurate grinding for large, heavy work pieces.
- The length of the bed ways are twice the table length to ensure no overhang of the table.
- Longitudinal and cross slide ways are hand-scraped and Turcite coated for high wear resistance and smooth table and column movements.
- Hydraulic longitudinal table movement
- Motorized cross column movement with solid state relay
- Spindle rapid traverse is standard. NC down feed is optional.
- Free standing hydraulic units prevent heat and vibration from causing grinding inaccuracy.
- Two single action hydraulic cylinders and piston rods ensure stable table motion.
20″ x 60″ New Sharp Traveling Column Surface Grinder Model SHT-2060-2A Standard Equipment:
- Coolant System (25 Gal.)
- Wheel Balancer
- Wheel Balancing Stand & Arbor
- Ballscrew on Cross Feed
- Electronic Crossfeed & Stroke Setting
- Wheel Flange
- Grinding Wheel (14” x 2” x 5”)
- Auto Lube System
- Spindle Head Rapid Up & Down
- Wired 220V or 440V. Please specify.
- Splash Guard Both Front and Back
20″ x 60″ New Sharp Traveling Column Surface Grinder Model SHT-2060-2A Optional Accessories:
| KET-50100 | 20″ x 40″ KANETSU ELECTROMAGNETIC CHUCK W/ CONTROL | $12,585 | |
| KET-50120 | 20″ x 47″ KANETSU ELECTROMAGNETIC CHUCK W/ CONTROL | $11,725 | |
| KET-50150 | 20″ x 60″ KANETSU ELECTROMAGNETIC CHUCK W/ CONTROL | $13,975 | |
| KET-60120 | 24″ x 47″ KANETSU ELECTROMAGNETIC CHUCK W/ CONTROL | $13,930 | |
| KET-60150 | 24″ x 60″ KANETSU ELECTROMAGNETIC CHUCK W/ CONTROL | $18,860 | |
| KET-60220 | 24″ x 87″ KANETSU ELECTROMAGNETIC CHUCK W/ CONTROL | $24,790 | |
| ILP-2048 | 20″ x 48″ WALKER LOW PROFILE ELECTROMAGNETIC CHUCK W/ CONTROL | $29,300 | |
| ILP-2060 | 20″ x 60″ WALKER LOW PROFILE ELECTROMAGNETIC CHUCK W/ CONTROL | $30,740 | |
| ILP-2448 | 24″ x 48″ WALKER LOW PROFILE ELECTROMAGNETIC CHUCK W/ CONTROL | $34,950 | |
| ILP-2460 | 24″ x 60″ WALKER LOW PROFILE ELECTROMAGNETIC CHUCK W/ CONTROL | $36,555 | |
| *** ALL MAGNETIC CHUCKS PRICES INCLUDE FREE INSTALLATION *** | |||
| SH-011 | TOUCH SCREEN NC CONTROL SPINDLE DOWNFEED WITH SERVO MOTOR, BALLSCREW FACTORY INSTALLED (440V MACHINES REQUIRES TRANSFORMER FOR THIS SYSTEM) | $19,850 | |
| 440T4 | 440V TRANSFORMER (FOR 440V MACHINE WITH NC CONTROL SPINDLE DOWNFEED) | $3,515 | |
| SH24-02 | 15 HP MOTOR IN LIEU OF 10 HP (ORDER WITH MACHINE) | $3,950 | |
| SH24-08 | COOLANT SYSTEM W/ PAPER FILTER AND MAGNETIC SEPARATOR (30 GAL) | $2,725 | |
| SH24-09 | PARALLEL DRESSER (MANUAL) | $1,185 | |
| SH24-10 | PARALLEL DRESSER (SEMI-AUTOMATIC) (PUSH BUTTON ON OPERATOR PANEL) (MUST ORDER WITH MACHINE) | $8,510 | |
| SH-50 | PARALLEL DRESSER WITH AUTO COMPENSATION, FACTORY INSTALLED, MUST ORDER WITH NC SPINDLE DOWNFEED CONTROL (ITEM #SH-011) | $19,850 | |
| SH24-17 | SPARE WHEEL ADAPTOR (FLANGE) | $570 | |
| SH-09 | RADIUS AND ANGLE DRESSER | $2,160 | |
| SH 54 | VARIABLE SPEED SPINDLE MOTOR (INVERTOR), ACCOMODATE LARGER GRINDING WHEEL, ABLE TO GRIND DIFFERENT MATERIALS (MUST ORDER WITH MACHINE) | $9,510 | |
| SH-52 | 16″ x 2″ x 5″ WHEEL IN LIEU OF 14″ x 2″ x 5″ WHEEL | $495 | |
| SH-MC | MIST COLLECTOR | $5,860 | |
| FG-SH2060 | SH-2060 | $4,500 | |
| FG-SH2460 | SH-2460 | $3,565 | |
| FAGOR 40i D.R.O. (HIGH RESOLUTION) | |||
| FG-40i-SH2060 | SH-2060 | $4,325 | |
| FG-40i-SH2460 | SH-2460 | $4,355 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
