Description
20” x 80” New Clausing Lathe C20 Variable Speed Gap Bed Lathe Model C2080VSJ Features:
- Geared Headstock and Control Panel: The 20” Clausing Lathe has a drive motor that drives a fully geared heavy-duty headstock giving you a total of 16 spindle speeds. All gears are hardened and ground and run in a continual bath of oil. The spindle is made of forged, quenched and tempered steel, with a case hardened spindle nose and mounted on precision taper roller bearings. The easy-to-operate control panel is designed for efficiency. Soft Start Inverter control.
- Variable Speed Headstock and Control Panel (VS Models): The 20″ VS Clausing Lathe has a two range headstock giving you a wide selection of variable speeds. All gears are hardened and ground and run in a continual bath of oil. The spindle is made of forged, quenched and tempered steel, with a case hardened spindle nose and mounted on precision taper roller bearings. The easy-to-operate control panel is designed for efficiency.
- Spindle Brake magnetic brake system for geared head machine and inverter brake system for variable speed machine.
- Chip Trolley chip trolley pull out for easy clean up.
- Full Length Splash Guard: A standard feature on the 20” lathe, for clean work environment.
- Carriage & Apron: Controls are designed for easy operation to ensure maximum productivity. Easy-to-read inch dials, a 4-way tool post, and thread dial are standard equipment on the 20” lathe.
- Chuck Safety Guard and Traveling Chip Guard: For safe operation of the lathe and CE safety marking.
- Bed & Bedways: The extra-wide scientifically designed bed, with tapered cross braces for fast and easy chip removal, is constructed of stabilized cast iron with bedways hardened of 42 to 47 Rc. The bed is mounted on a rigid, fabricated steel base that is specially engineered to absorb vibration and ensure smooth, accurate operation.
- Tailstock: A heavy-duty casting design with 3” quill for maximum rigidity to support work pieces or tooling.
20” x 80” New Clausing Lathe C20 Variable Speed Gap Bed Lathe Model C2080VSJ Specifications:
Capacity | |
Swing over bed | 20” |
Center height | 10” |
Swing in gap | 30” |
Gap length in front of faceplate | 8.7” |
Swing over cross slide | 13.5” |
Bed width | 13” |
Center distance | 40” / 60″ / 80″ / 120″ |
Headstock | |
Spindle bore | 3.125” |
Spindle nose | D1-8 |
Spindle taper / Bushing taper | 7MT/5MT |
No. spindle speeds geared drive | 16 |
Spindle speed (rpm) geared drive | 20-1600 |
No. spindle speeds variable drive | 3 |
Spindle speed variable drive | 16-2000 |
Thread and Feed Box | |
No. of longitudinal feeds | 20 |
Range (inches) | 0.0015-0.04 |
No. of cross feeds | 20 |
Range (inches) | 0.0008-0.02 |
No of metric threads | 39 |
Range (mm) | 0.2-14 |
No. of inch threads | 45 |
Range (inches) | 2-72 |
No. of modular threads | 18 |
Range (mm) | 0.3-3.5 |
No. of diametral pitch threads | 21 |
Range (inches) | 8-44 |
Leadscrew dia./TPI | 1.26”/4 |
Slide and Carriage | |
Cross slide travel | 10.5″ |
Cross slide width | 7.8” |
Compound travel | 5.1” |
Compound width | 5.31” |
Max. tool size | 1” x 1” |
Tailstock | |
Tailstock quill diameter | 3” |
Tailstock quill travel | 7” |
Tailstock taper | 5MT |
Motors | |
Spindle motor (GH & VS) (Hp) | 12.5 |
Coolant pump motor (Hp) | 1/8 |
Dimensions Machine | |
Machine height | 53” |
Machine width | 43” |
Machine length 40″/60″/80″/120″ | 88″ / 108″ / 128″ / 168″ |
Machine weight 40″/60″/80″/120″ (lbs) | 4,400 / 4,840 / 5,500 / 7,700 |
Dimensions Shipping | |
Height | 76″ |
Width | 44″ |
Length 40″/60″/80″/120″ | 97″ / 116″ / 136″ / 176″ |
Weight 40″/60″/80″/120″ (lbs) | 4,950 / 5,500 / 6,270 / 8,800 |
Equipment:
- Inch Dials
- Dead Centers
- 4-Way Tool Post
- 2 Speed Tailstock Quill Advance
- Coolant System
- One-Shot Lubrication
- Interlocking Chuck Guard
- 12” 3-Jaw Chuck SK
- Steady Rest w/ Rollers .98” to 5.3” Capacity
- 5-Position Turret Type w/Micrometer Bed Stop
- Splash Guard
- Leadscrew Cover
- Thread Dial Indicator
- T-Slotted Top Slide
- Spindle Brake Magnetic Geared Head
- Spindle Brake Inverter Variable Speed Head
- Roll Out Chip Pan
- Chip Guard
- LED Work Light
- CE Electrics
- Tool Box and Manual
Standard Voltage is 230/3/60 Volt. Other voltages may require a transformer or special order.
20” x 80” New Clausing Lathe C20 Variable Speed Gap Bed Lathe Model C2080VSJ Optional Equipment:
Work Holding Options | |
J20-02 Follower Rest w/Roller Fingers .39” to 3.5” | $1,305.00 |
J20-13 Extra Steady Rest w/Roller Fingers .98” to 5.3” | $1,610.00 |
J20-13A Large Steady Rest w/Roller Fingers 3.34” to 7.4” | $1,885.00 |
J20-13B X-Large Steady Rest w/Roller Fingers 6.4” to 11.8” | $2,215.00 |
Tool Post Options | |
J18-05A Aloris CA Tool Post w/4 Holders (2 sided) | $1,545.00 |
15-775A-1 Extra Aloris Straight Holder 1” | $160.00 |
15-775A-1S Extra Aloris Straight Holder 1-1/4” | $235.00 |
15-775A-2 Extra V-Holder 1” Block 13/16” Bar | $175.00 |
15-775A-4D Extra Aloris Boring Bar Holder 1-1/4” | $230.00 |
15-775A-41D Extra Aloris Boring Bar Holder 1-1/2” | $265.00 |
15-775A-5 Extra Aloris #3 Morse Taper Holder | $220.00 |
15-775A-71 Extra Aloris Cutoff and Grooving Blade Holder | $375.00 |
15-775A-BSL187 Aloris 3/16” Cutoff Blade | $135.00 |
Chucking Options | |
J20-01 24” Face Plate D1-8 | $2,440.00 |
1225324 12” 3-Jaw Setrite Universal Scroll Steel Chuck | $3,245.00 |
1525324 15” 3-Jaw Setrite Universal Scroll Steel Chuck | $5,245.00 |
1226324 12” 6-Jaw Setrite Universal Scroll Steel Chuck | $4,890.00 |
1526324 15” 6-Jaw Setrite Universal Scroll Steel Chuck | $6,945.00 |
1414424 14” 4-Jaw Independent Ductile Iron Chuck | $2,450.00 |
1614524 16” 4-Jaw Independent Ductile Iron Chuck | $2,620.00 |
PB23-D8 PBA Front Mounted Handwheel 5C Collet Chuck | $1,645.00 |
0123-R-(state size) Individual 5C Round Collet Inch | $30.00 |
0123-R-(state size) Individual 5C Round Collet Metric | $30.00 |
0123-SET-4 1/16″-1 1/16″ by 64ths (inch set) | $1,850.00 |
0123-SET-5 1/16″-1 1/16″ by 32nds (inch set) | $960.00 |
0123-SET-6 1/16″-1 1/16″ by 16ths (inch set) | $500.00 |
0123-SET-7 1/8″-1″ by 8ths (inch set) | $235.00 |
0123-SET-1 3mm-27mm by .5mm (metric set) | $1,400.00 |
0123-SET-2 3mm-27mm by 1mm (metric set) | $725.00 |
7659 18pc 5C Collet Rack | $55.00 |
Tailstock Options | |
17-910 Live Center | $980.00 |
1897 Drill Chuck for Tailstock | $165.00 |
7327 5MT to 3JT Arbor for 1897 | $120.00 |
Miscellaneous Options | |
J18-06 Taper Attachment | $3,315.00 |
J18-06 Taper Installation | $350.00 |
DRO | |
AR12M84100T 2 Axis Acu-Rite 100 DRO | $4,200.00 |
AR12M84200T 2 Axis Acu-Rite 200 DRO | $4,525.00 |
AR12M84300T 2 Axis Acu-Rite 300 DRO | $5,000.00 |
AR12M84300TTHD 2 Axis Acu-Rite 300 DRO w/Thread Assist | $6,050.00 |
FG1280-PK 2 Axis Fagor LED DRO | $4,200.00 |
FG1280-PKC 2 Axis Fagor Color DRO | $4,525.00 |
NW1280NMS800 2 Axis Newall NMS800 LED DRO | $4,525.00 |
Installation of 2 Axis System | $500.00 |
Installation of 2 Axis w/Threading System | $650.00 |
Installation of Taper Attachment | $350.00 |
Clausing Warranty:
Clausing warrantees the machine for a period of one year from the date of shipment. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.