Description
20″ x 87″ New Sharp Vertical Bed Type Mill Model KMA-3 Specifications:
| CAPACITY | |
| Table Size | 86.62 x 19.68 |
| T-slots (No. x Width x Pitch) | 5 x 0.75 x 3.56 in. |
| Table Travel: X Longitudinal | 59 in. |
| Table Travel: Y Cross | 23.62 in. |
| Vertical Head Travel | 27.56 in. |
| Spindle Center to Column | 21.62 in. |
| Spindle Nose to Tabel | 3.93 – 31.5 in. |
| TABLE FEEDS, RAPIDS | |
| Longitudinal Feeds (Variable) | 1.12 |
| Longitudinal Rapids | 130 in. |
| Cross Feeds (Variable) | 39.37 in. |
| Cross Rapids | 130 in. |
| VERTICAL HEAD | |
| Spindle Taper | No. 50 |
| Spindle Speeds | 45-1500 rpm |
| Vertical Head Travel | |
| Vertical Head Feeds | 0.002-0.008 in. |
| MOTORS | |
| Vertical Spindle | 20 HP |
| Table Feed and Rapid | 2 HP |
| Coolant System | 1.12 HP |
| GENERAL | |
| Floor Area (W x D x H) | 14.58 x 8.33 x 9.41 ft. |
| Approximate Weight | 15,400 lbs. |
| Power Consumption (220V) | 60 amps |
| Power Consumption (440V) | 30 amps |
All specifications subject to change without notice. Please call to verify.
Standard Equipment:
- Coolant system
- Auto lubrication system
- Draw-in bolt (1 pc)
- Tool box
- Wired 220V or 440V
Optional Accessories:
- Power drawbar w/foot pedal control
- 6 in. ‘KURT” vise with swivel base D688
- Halogen work light
- 30 in. travel in Z axes in lieu of 20 in.
20″ x 87″ New Sharp Vertical Bed Type Mill Model KMA-3 Optional Accessories:
| PART # | DESCRIPTION | PRICE |
| PD-200FP-K1 | “Align” Power Drawbar w/Foot Pedal Control (Vertical) for KMA-1 | $2,286 |
| PD-200FP-K2, 3 | “Align” Power Drawbar w/Foot Pedal Control (Vertical) for KMA 2, 3, 5 | $2,286 |
| “Align” Power Drawbar w/Foot Pedal Control (Horizontal) for KMA-3H, 5H | $2,286 | |
| Factory Installation – Power Drawbar (Align) | $535 | |
| 5000-2126A | 6″ “Kurt” Vise with Swivel Base D688 | $1,800 |
| WL-110v55W-S (KMA-1) | Halogen Work Light | $285 |
| WL-110v55W-S (KMA-2) | Halogen Work Light | $285 |
| WL-110v55W-S (KMA-3) | Halogen Work Light | $285 |
| WL-110v55W-S (KMA-5) | Halogen Work Light | $285 |
| CS-VBM-8VHLL | Table Outboard Supports w/Slide Ways (This Option Extends Table (X) Travel by Additional 20″. Also Increase Table Load capacity by 20%) Available for Models KMA5, KMA5H Only. (Must order w/machine) | $15,885 |
| ACC-CHIP | Chip Conveyor for Both Sides of Table (KMA-5) (Order w/machine) | P.O.R |
All prices and specifications subject to change without notice. Please call to verify.
20″ x 87″ New Sharp Vertical Bed Type Mill Model KMA-3 Digital Readout Systems:
| PART # | DESCRIPTION | PRICE |
| FAGOR 30i 3-AXES DRO | ||
| FG-KMA1-3A | KMA-1 | $3,675 |
| FG-KMA2-3A | KMA-2 | $3,890 |
| FG-KMA3-3A | KMA-3, KMA-3H | $4,515 |
| FG-KMA5 | KMA-5 | $6,920 |
| FG-KMA5H | KMA-5H (Include additional scale for vertical movement of horizontal head) | $8,970 |
| ACU-RITE 203S 3-AXES DRO | ||
| AR-KMA1-3A | KMA-1 | $4,983 |
| AR-KMA2-3A | KMA-2 | $5,468 |
| AR-KMA3-3A | KMA-3 | $6,040 |
| AR-KMA3H | KMA-3H (Include additional scale for vertical movement of horizontal head) | $8,600 |
| AR-KMA5 | KMA-5 | $10,050 |
| MAR-KMA5H | KMA-5H (Include additional scale for vertical movement of horizontal head) | $10,915 |
| NEWALL NMS 800 3-AXES DRO | ||
| NWN-KMA1-3A | KMA-1 | $3,760 |
| NWN-KMA3-3A | KMA-3 | $6,480 |
| NWDP-KMA3-4A | KMA-3H (Include additional scale for vertical movement of horizontal head) | $10,400 |
| NEWALL DP700 3-AXES DRO | ||
| NWDP-KMA5-3A | KMA-5 | P.O.R. |
| NWDP-KMA5 H | KMA-5H (Include additional scale for vertical movement of horizontal head) | P.O.R. |
| Factory Installation 3-Axes DRO | $2,170 | |
| Factory Installation 4-Axes DRO | $2,560 |
20″ x 87″ New Sharp Vertical Bed Type Mill Model KMA-3
Features:
- Solid Construction, Box Way Design
- High quality castings are used on base, column saddle and table. They are stressed relieved to avoid any distortion. All sliding surfaces are hand scraped to ensure full bearing support. All reference surfaces and T slots are precision ground to exact tolerances.
- Honeycombed Ribbing on Column
- The vertical column of a bed mill usually received most pressure during heavy duty milling operation. Honey combed pattern ribbings enhance rigidity of the casting.
- Double Nut Backlash Eliminator
- Backlash on the screw increases after long term usages. The backlash eliminator can correct the situation by adjusting the double nuts instead of the old method of squeezing a split nut.
- Eye-Level Tai-Lever Handle Vertical Head Movement
- Despite the heavy duty vertical spindle head, it is easy to move the head up and down manually using the trim-lever handle for positioning or close milling jobs.
- Well Organized Electric Panel
- All relays, contactors, transformers, overload protections, safety disconnect switches and wires are clearly labeled for easy maintenance.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
