Description
The DoALL DCDS-600CNC-A high production, horizontal StructurALL®, automatic numeric controlled indexing, dual column, dual mitering metal cutting band saw offers up to 17″ x 24″ (440x600mm) rectangular cutting capacity and 18.5″ round capacity. Also classified as a double column, dual swivel, the DCDS-600CNC-A is ideal for production sawing of a large variety of materials including, but not limited to, structural solids, stainless and tool steel. The DoALL band saw has a touch display controller for easy operation. The DCDS-600CNC-A offers high loading capacity and a variety of optional accessories. This hydraulically controlled dual column, automatic metal cutting band saw has a double-swivel head that is able to miter/angle cut at 60° both left and right. The saw blade is set at 7° cant allowing for more efficient cutting. The DCDS-600CNC-A is the ideal machine for a fabricator cutting multiple angles in the same work piece.
24″ x 15.1″ New DoALL Horizontal Band Saw Model DCDS-600CNC-A Specifications:
| Cutting capacity round tube 90° | 17.25″ |
| Cutting capacity round solid 90° | 8.5″ |
| Cutting capacity rectangle 90° | 24″ x 15.1″ |
| Capacity round at 45° | 16.9″ |
| Capacity round solid 45° | 7″ |
| Capacity rectangle at 45° | 16.9″ x 15.1″ |
| Capacity round at 60° | 11.4″ |
| Capacity round solid 60° | 5.5″ |
| Capacity rectangle at 60° | 11.4″ x 15.1″ |
| Saw blade (width x length) | 1.25″ x 238″ |
| Band Drive | |
| Motor HP | 5 Hp |
| Band speed | 50-490 fpm |
| Band tension | Hydraulic |
| Hydraulic System | |
| Motor HP | 1 Hp |
| Reservoir size | 12 gallon |
| Coolant System | |
| Flood | Yes |
| Mist lubricator | Yes |
| Motor HP | 0.2 Hp |
| Reservoir size | 10 gallon |
| Indexer | |
| Length per stroke | 78.5″ |
| Maximum index strokes length | 393″ |
| Remnant length at 90° in auto | 19.5″ |
| Floor Space Dimensions | |
| W x L x H | 173″ x 237″ x 87.5″ (w/o safety light curtain) |
| Material pass height | 32.5″ |
| Machine weight | 7,232 lbs |
| Electrical | |
| Voltage requirement (Wye configuration) | 460V-60Hz-3ph |
| Total amp draw (FLA) | 27 amps |
24″ x 15.1″ New DoALL Horizontal Band Saw Model DCDS-600CNC-A Features:
- Operator Control Console: Control Console extends out beyond the light curtain and can easily be positioned for operator comfort and safety insuring hands are away from the blade at band start.
- Mitsubishi Touch Screen Panel: The touch screen workstation provides the operator with easy to access job programming along with constant monitoring of jobs while the machine is running in automatic. The work station also monitors and displays blade speed, head feed rate, and head position at all times. It automatically displays any machine errors for ease of any troubleshooting eliminating any long periods of downtime.
- Saw Head Design: The saw head is mounted on linear rails which are mounted to two robust columns at a 7 degree cant. The 4 point head mounting system to the columns increases stability of the saw head allowing for increased blade life.
- Direct Driven Band Drive: Drive is comprised of an electric VFD controlled motor transferring power thru a gear reduction unit directly to the drive wheel eliminating belt slippage giving positive torque to the saw blade. The drive wheel is supported on the side opposite of the drive to lessen bearing wear and uneven drive wheel wear.
- Servo Driven Indexer: The indexer is positioned and driven by a servo motor driven ballscrew system including a rotary encoder which is known for its accuracy. Its 78.5″ single stroke, which can be multiplied, decreases cycle time of the machine allowing for increased production.
- Retractable Shuttle Type Index Vise: Both index vise jaws retract when the vise is opened to accommodate the movement of crooked stock increasing accuracy and repeatability. The vise open/close position is constantly monitored to prevent the possibility of collision between the fixed and index vise.
- Saw Head Turntable: The robust saw head turntable is hydraulically driven during automatic cycle programming or manually entered RTO (rotate to) function and hydraulically locked in place to prevent head drift eliminating the possibility of scrap parts.
- Digital Read Out for Head Positioning: Digital Read Out’s are used for head angular and height positioning. These scales are time honored and known for their rigidity and service in the sawing industry.
- Full Stroke Hydraulic Vises: Full stroke hydraulic vises insure maximum part clamping eliminating the possibility of material movement. Unique designed front vise jaws give maximum clamping pressure near the cut at all times. Variable vise pressure will prevent distortion in thin wall tubing and extrusions.
- Multiple Machine Cycles: The machine can be operated in either semi-automatic or automatic mode. In semi-automatic mode the material is placed manually by the operator or by use of the GTO function and clamped in place. The head is placed to the desired angle thru the RTO or rotate function and locked in place. The saw band is started and the cut is completed. In the automatic mode the operator programs the pieces to be cut in one of the 100 jobs, sets the material, and starts the cycle. The machine automatically cycles thru the parts as programmed making it a “hands free” operation.
- Hydraulic Blade Tension: Two cylinders located at the front and back of the idler wheel allow for better support of the wheel and lessen bearing wear. The hydraulic tension eliminates possible error of over/under tightening of the band for maximum band life and cutting rates.
- Flood Coolant System: Supplies coolant to the blade evenly before and after the cut creating straighter cuts and allowing longer blade life due to coolant being supplied at the tooth tip.
- ASR Metered Feed System: The ASR cutting feed system allows for automatic cutting feed regulation based on set parameters. This system has two basic modes ARP and RZP-2. The ARP system adjusts the cutting speeds by monitoring the cutting resistance of the material and the dulling of the saw blade. The RZP-2 system allows the operator to break the material down into 5 cutting zones allowing for the increase/decrease of the band speed and feed rates according to the shape of the material. These 2 features override the metered feed rate entered by the operator preventing over feed conditions that will greatly affect band life.
- ARN Band Break In: The automatic band break in cycle, or ARN, automatically reduces programmed feed and speed rates for a specified length of time. The cutting force and blade speed will automatically adjust at the end of the preset time. This takes the guess work out of blade break in insuring that the procedure gets done at blade change greatly increasing band life.
- Band Wheels: Cast steel band wheels insure proper band tracking and long life.
- CMU: The CMU mode allows in cycle for the material to be backed up to allow for non contact movement of the head to the upper position saving the saw band from dragging on the material which shortens band life.
- Warranty: One year parts and service subject to terms and conditions. Optional ten year warranty is available.
24″ x 15.1″ New DoALL Horizontal Band Saw Model DCDS-600CNC-A Standard Equipment:
- Hydraulic dual swivel head to 60 left to 60 degree right
- Automatic & semi-automatic cycle
- Movable console with Mitsubishi controls
- Rapid head down approach
- Spring loaded carbide faced saw guide inserts
- Programmable material height sensor
- Full stroke hydraulic vises
- Driven band cleaning brush
- Infinite band speed by variable frequency drive
- Automatic movable guide arm setting
- Cast steel band wheels
- Metered feed system
- Laser line generator
- Vertical hold downs
- Hydraulic band tension
- Recirculating coolant system
- Mist band lubricator system
- Digitally displayed angle position with hydraulic look
- Variable vise pressure
- LED work light
- 7 degree cant design
- Saw blade guards
- Band door interlocks
- Operation and parts manuals on USB stick
- One (1) complimentary DoALL bi-metal saw blade
- Complimentary DoALL cutting fluids package
24″ x 15.1″ New DoALL Horizontal Band Saw Model DCDS-600CNC-A Optional Accessories:
| KKR Blade deviation monitor, loss of 1″ of width capacity. ** Extended lead time | $2,443 |
| 440-H-ECK Motor driven band brush. **Extended lead time | $3,123 |
| 440-HM-Drive 7.5 Hp motor with bevel gearbox optimal for use of carbide saw blades **Extended lead time | $1,200 |
| 440-CLT Automatic lube of the turntable. **Extended lead time | $1,755 |
| 440-H-ATB Leading edge finder. **Extended lead time | $680 |
| PCP One Year Subscription for external programming | $750 |
| 440-VTT Worm chip conveyor. **Extended lead time | $3,603 |
| 440-VTT-D Chip conveyor extension for 55 gal drum **Extended lead time | $4,645 |
| 440RDL 1000 DoALL strongly recommends purchasing 39″ Heavy-duty output conveyor for angle cutting w/drip pan/gutter – 24.5″ cylinder width – 1142 lbs/ft capacity | $5,498 |
| 500-RDT-1000/620 39″ Input or output conveyor w/drip pan/gutter – 24.5″ cylinder width – 1142 lbs/ft capacity | $3,043 |
| 500-RDT-2000/620 78″ Input or output conveyor w/drip pan/gutter – 24.5″ cylinder width – 1142 lbs/ft capacity | $4,325 |
| 500-RBR Single fixed vertical guide roller – 11″ cylinder heights – attached to RDT for operation | $593 |
| 500-RBRS Single adjustable vertical guide roller – Adjusts up to 24.5″ cylinder width – requires RBR for operation | $713 |
| 500-CVS Hydraulic shift to move RBRS. This option will move material against | $2,080 |
| 500×750-RDH Single adjustable horizontal conveyor roller – 1543 lbs/ft capacity | $1,775 |
| RDM12000/620 78″ Input or output robust conveyor w/chain driven rollers. Driving by electrical motor, worm gearbox & inverter | $11,780 |
| RDML12000/620 78″ Input or output robust conveyor w/chain driven rollers. Connecting to 540-RDM (max 2 unites per drive section) | $6,463 |
| 440-H-Qparts-PCK Wear parts service kit – contains wear plates, guides band brushes | $960 |
| 226028 Magnetic wand chip remover | $195 |
| 1200008 Starter Kit of Six Pack Blades Consist of 1 each Silencer Plus 3-4, 4-6, 5-8 and StructurALL 3-4, 4-6, 5-8 | $574 |
| 13410245 5 Gal. Pail of Band All 102 Semi Synthetic | $160 |
| 21200045 5 Gal. Pail of AL-2000 Mist Coolant | $240 |
| Premium DoALL Cut Above 10 Year Warranty Annual Investment | $7,039 |
| Platinum DoALL Cut Above 10 Year Warranty Annual Investment | $10,949 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.