27.5″ x 43″ New Marvel Horizontal Band Saw Model PB2743S

  • Heavy-Duty
  • Dual Post
  • Two-Way Swivel
  • Horizontal
  • Metal Cutting
  • 10 H.P.
  • 2” Blade
  • Up to 60° Mitering

Terms:  Check with Order

SKU: 18622 Categories: , ,

Description

27.5″ x 43″ New Marvel Horizontal Band Saw Model PB2743S Specifications:

Capacity: 90°
27.5″ x 43″
Capacity: 45°
26.75″ x 27.5″
Capacity: 60°
18.875″ x 27.5″
Blade
2″ x 31′ 6″ x .063″
Saw Frame
The saw frame is canted at a 8° angle for faster cutting of structural and other flat materials. The saw base is Swivels to 45° one direction and 60° the other, for miter cutting. A ½ hp (400 W.) motor turns the machine base and the degree of angle is read out on a LED DISPLAY. The Heavy Duty Saw Frame rides up and down a Linear Way Guide System.
Blade Tension
Hydraulically controlled tension (35,000 psi) provides consistent square cutting accuracy. The Motion Detector will shut the machine off should a blade break or stall. Blade Wheel Diameter is 34.625” to provide maximum blade life.
Speed Range
50-325 SPFM (15-100m/min.) infinitely variable through a frequency inverter system and a heavy duty Worm Gear Transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An Electric Tachometer assures accurate speed settings.
Hydraulic Down Feed
Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color coded dial allowing the operator to select the best setting for the type of material being cut.
Motors
Blade Drive: 10 H.P. (7.5 kW), Hydraulic Pump Motor: 3 H.P. (2.2 kW), Oil Mist Coolant System: 1/4 HP, (180W), Wire Brush Motor: 1/8 HP (90W), Table Rotation: 1/2 HP, (400W)
Blade Guides
A combination of roller bearing and hydraulically actuated carbide blade guides assures the blade is held taut for fast, accurate cuts. The cast iron Movable Guide Arm is positioned through a Hydraulic Cylinder, then is Hydraulically Locked in position.
Chip Brush
An Independent Motor drives the Blade Brush to assure complete removal of chips from each gullet of the blade assuring optimum cutting performance and enhanced blade life.
Fast Approach
Work height is automatically set allowing the head to raise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
Vise Jaws
Full Stroking Vise Jaws and a Vertical Clamp Devise assure the work piece is secure and eliminating excessive vibration during the cut providing better blade life and cleaner cuts. Minimum Clamping Capacity is 16.125” (410mm).
Controls
An Independent Electric Cabinet and Control Panel allow the operator to position the controls for optimum viewing of the cutting area. A PLC controls all electrical and hydraulic functions.
Machine Floor Space
½” H x 165-3/8” W x 74-5/8” D (2250H x 4200W x 1900Dmm)
Machine Weight
17,600 lbs
Miter Cutting
45-0-60
Blade Wheels Diameter
34 5/8″
Hydraulic Capacity
16 Gals
Table Height
37 In

27.5″ x 43″ New Marvel Horizontal Band Saw Model PB2743S Standard Equipment:

  • Blade Tension: Hydraulically controlled tension (35,000 psi) provides consistent square cutting accuracy. The motion detector will shut the machine off should a blade break or stall. Blade wheel diameter is 34.625” to provide maximum blade life.
  • Speed Range: 50-325 SPFM (15-100m/min) infinitely variable through a frequency inverter system and a heavy duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An electric tachometer assures accurate speed settings.
  • Hydraulic Down Feed: Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color coded dial allowing the operator to select the best setting for the type of material being cut.
  • Blade Guides: A combination of roller bearing and hydraulically actuated carbide blade guides assures the blade is held taut for fast, accurate cuts. The cast iron movable guide arm is positioned through a hydraulic cylinder, then is hydraulically locked in place.
  • Chip Brush: Independent motor drives the blade brush to assure complete removal of chips from each gullet of the blade assuring optimum cutting performance and enhanced blade life.
  • Fast Approach: Work height is automatically set allowing the head to raise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
  • Controls: An independent electric cabinet and control panel allow the operator to position the controls for optimum viewing of the cutting area. A PLC controls all electrical and hydraulic functions.
  • Blade Tension: Manually controlled tension with Blade Tension Indicator Gauge provides consistent square cutting accuracy. The motion detector will shut the machine off should the blade break or stall.
  • Speed Range: 95 – 295 SFPM (29 – 90 m/min) infinitely variable through an inverter drive and a heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An electric tachometer assures accurate speed setting.
  • Hydraulic Down Feed: Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
  • Hydraulic Shuttle Feed: Length settings of 0 – 27.6” (700mm) are accomplished with simple programming at the operator’s touch screen. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is + .005 per index. (Maximum pull weight fully supported on rollers 4,400 LBS).
  • Out-of-Stock Switch: The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.
  • Blade Guides: The combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of + .002 per inch of cut material.
  • Fast Approach: Work height is manually set allowing the head to rise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
  • Chip Brush: Powered from the main drive wheel of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.
  • Work Light: Positioned directly over the work area to provide better illumination of the cutting area, the work light can be turned on and off independently from the operator’s control panel.

27.5″ x 43″ New Marvel Horizontal Band Saw Model PB2743S Optional Accessories:

  • Out-of-square Detector
  • Laser Alignment Light
  • 2 Meter Dead Roller Table
  • 2 Meter Power Roller Table
  • Automatic Series
  • 39” Long Shuttle
  • 58” Long Shuttle
  • 117” Long Shuttle

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.