29″ x 106″ New Sharp Bed Type Mill Model KMA-5H

29″ x 106″ New Sharp Bed Type Mill Model KMA-5H Standard Equipment:

  • Auto lubrication system
  • Coolant system
  • Leveling blocks – 6 pc
  • Leveling nuts and bolts – 6 sets
  • Draw-in bolt (1 pcs)
  • Full geared drive vertical spindle with 2-range variable speed
  • Table feeding system equipped with precision ball screws and servo motors
  • X/Y/Z axes equipped with pneumatic clamp device
  • Tool kit: Machine manual, half nut wrench, 17m & 19m wrenches, set of 6 Allen wrenches, Phillips-head screw driver, flat head screw driver, oil can, grease gun, rear way cover bracket, pin for indicator, and can of paint

Terms: Check with order

 

Options

Digital Readout

Required: Enter your voltage requirements.

Description

This model has both vertical and horizontal heads. Bed type vertical mills are ideal for milling large work piece or heavy cutting on hard metals. The quill is fixed so it can withstand strong lateral forces. For this model, the entire vertical head moves up to 28″ that enables deep drilling and boring operations. The large spindle with #50 taper can remove large amount of metals in one pass. The horizontal head with 7.5 HP motor and #50 taper spindle driven by AC servo motor on ball screw performs horizontal milling operations with high accuracy. This arrangement allows the performing of different type of million operations on one set up, thus maintain accuracy and increase productivity.

29″ x 106″ New Sharp Bed Type Mill Model KMA-5H Specifications:

CAPACITY  
Table Size 106.3 x 29.5 in.
T-Slots (No. x Width x Pitch) 5 x 0.75 x 5.9 in.
Table Travel: X Longitudinal 78.75 in.
Table Travel: Y Cross 31.5 in.
Vertical Head Travel 27-9/16 in.
Spindle Center to Column 31.5 in.
Spindle Nose to Table 2.75 to 30.3 in.
TABLE FEEDS, RAPIDS  
Longitudinal Feeds (Variable) 1.10 – 39.37 in.
Longitudinal Rapids 122.04 in.
Cross Feeds (Variable) 1.10 – 39.37 in.
Cross Rapids 122.04 in.
VERTICAL HEAD  
Spindle Taper NST #50
Spindle Speeds 45-1500 rpm
Vertical Head Travels 27.5 in.
Vertical Head Feeds 39 ipm
HORIZONTAL HEAD  
Spindle Nose Taper NST #50
Spindle Speeds (12) 40-1450 rpm
Spindle Head Travels 25.5 in. (up, down)
Vertical Rapid Speed  150 ipm
MOTORS  
Vertical Spindle  17.5 HP
Horizontal Spindle  7.5 HP
Table Feed and Rapid 4.7 HP
Coolant System 0.16 HP
GENERAL  
Floor Area (W x D x H) 18.68 x 10.08 x 10.5 ft.
Approximate Weight 28,650 lbs.
Power Consumption (220V) 60 amps
Power Consumption (440V) 30 amps

All specifications subject to change without notice. Please call to verify.

Standard Equipment:

  • Coolant system
  • Auto lubrication system
  • Draw-in bolt (1 pc)
  • Tool box
  • Wired 220V or 440V

29″ x 106″ New Sharp Bed Type Mill Model KMA-5H Optional Accessories:

PART # DESCRIPTION PRICE
PD-200FP-K1 “Align” Power Drawbar w/Foot Pedal Control (Vertical ) for KMA-1 $2,286
PD-200FP-K2,3 “Align” Power Drawbar w/Foot Pedal Control (Vertical) for KMA-2, 3, 5 $2,286
PD-200FP-K2,3 “Align” Power Drawbar w/Foot Pedal Control (Vertical) for KMA-3H, 5H $2,286
  Factory Installation – Power Draw Bar (Align) $535
5000-2126A  6″ “Kurt” Vise w/Swivel Base D688  $1,800 
WL-110V55W-S (KMA-1)   Halogen Work Light $287 
WL-110V55W-S (KMA-2)  Halogen Work Light $287 
WL-110V55W-L (KMA-3)  Halogen Work Light $287 
WL-110V55W-L (KMA-5)  Halogen Work Light $287 
CS-VBM-8VHLL Table Outboard Supports with Slide Ways (This Option Extends table (X) Travel by Additional 20″, Also Increase table load capacity by 20%) Available for Models KMA5, KMA5H Only (Must order with machine) $15,885
ACC-SHIP  Chip Conveyor for Both Sides of Table (KMA-5) (Order with machine)  P.O.R. 

All prices and specifications subject to change without notice. Please call to verify.

29″ x 106″ New Sharp Bed Type Mill Model KMA-5H Digital Readout Systems:

  FAGOR 30i 3-AXES DRO  
FG-KMA1-3A KMA-1 $3,675
FG-KMA2-3A KMA-2 $3,890
FG-KMA3-3A  KMA-3, KMA-3H  $4,515 
FG-KMA5  KMA-5  $6,920 
FG-KMA5H  KMA-5H (Include additional scale for vertical movement of horizontal head)  $8,970 
  ACU-RITE 203S 3-AXES DRO   
AR-KMA1-3A KMA-1  $4,983 
AR-KMA2-3A  KMA-2  $5,468 
AR-KMA3-3A  KMA-3  $6,040 
AR-KMA3H  KMA-3H (Include additional scale for vertical movement of horizontal head)  $8,600 
AR-KMA5  KMA-5  $10,050 
AR-KMA5H  KMA-5H (Include additional scale for vertical movement of horizontal head)  $10,915 
  NEWALL NMS 800 3-AXES DRO  
NWN-KMA1-3A  KMA-1  $3,760 
NWN-KMA3-3A  KMA-3  $6,480 
NWDP-KMA3-4A  KMA-3H (Include additional scale for vertical movement of horizontal head)  $10,400 
  NEWALL DP 700 3-AXES DRO  
NWDP-KMA5-31  KMA-5  P.O.R. 
NWDP-KMA5 H  KMA-5H (Include additional scale for vertical movement of horizontal head)  P.O.R. 
  Factory Installation 3-Axes DRO $2,170
  Factory Installation 4-Axes DRO $2,560

All prices and specifications subject to change without notice. Please call to verify.

29″ x 106″ New Sharp Bed Type Mill Model KMA-5H Features, Functions & Benefits:

  • Solid Construction, Box Way Design
  • High quality castings are used on base, column, saddle and table. They are stressed relieved to avoid any distortion. All sliding surfaces are hand scraped to ensure full bearing support. All reference surfaces and T slots are precision ground to exact tolerances
  • Honeycombed Ribbing on Column
  • The vertical column of a bed mill usually received most pressure during heavy duty milling operations. Honey combed pattern ribbings enhance rigidity of the casting.
  • Double Nut Backlash Eliminator
  • Backlash on the screw increases after long term usages. The backlash eliminator can correct the situation by adjusting the double nuts instead of the old method of squeezing a split nut.
  • Eye-Level Tri-Lever Handle Vertical Head Movement
  • Despite the heavy duty vertical spindle head, it is easy to move the head up and down manually using the tri-lever handle for positioning or close milling jobs.
  • Additional Horizontal Milling Head
  • The horizontal milling head with a fixed quill travels along the side of the column driven by AC servo motor on precision ball screw. It is equipped with NST#50 spindle taper, runs on 7.5 HP spindle motor. The head has 12 spindle speeds from 40-1,450 rpm.

 

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/