Description
30″ New Ibarmia Geared-Drive Column Drill Model BF35RS Specifications:
| Capacities | |
| Maximum drilling capacity in steel | 1.38″ |
| Maximum drilling capacity in cast iron | 1.57″ |
| Maximum milling capacity in steel | 1.80″ |
| Maximum milling capacity in cast iron | 3.20″ |
| Maximum tapping capacity in steel | 1.18″ |
| Maximum tapping capacity in cast iron | 1.3″ |
| Specifications | |
| Spindle taper | 4MT |
| Optional spindle taper (on request) | ISO-30 |
| Quill diameter | 2.95″ |
| Spindle travel (drilling depth) | 7.87″ |
| Main motor power | 1.2 / 2 Hp |
| Coolant pump motor power | 0.12 Hp |
| Head geared-motor power | 0.1 Hp |
| Number of speeds (see speed chart) | 16 |
| Spindle speeds | Low: 113-162-248-363-417-597-912-1335 High: 226-324-496-726-834-1194-1824-2670 |
| Number of automatic feeds | 3 |
| Auto feed range (in./rev.) | 0.0039 / 0.0079 / 0.0118 |
| Dimensions and Weights | |
| Height | 81.9″ |
| Overall length | 57.1″ |
| Spindle to table | Minimum 0″ Maximum 23.23″ |
| Spindle center to column | 15.08″ |
| Maximum head height | 94.5″ |
| Worktable: W x L x H | 14.7″ x 47.24″ x 35.43″ |
| Base width | 29.53″ |
| Overall width | 61.81″ |
| X travel | 27.56″ |
| Y travel | 14.17″ |
| Net weight | 2,756 lbs. |
| Shipping weight | 3,197 lbs. |
| Shipping dimension (W x L x H) | 67” x 67” x 95” |
30″ New Ibarmia Geared-Drive Column Drill Model BF35RS Features:
- 18 spindle speeds
- Automatic feed reversing system for tapping (RS models)
- Adjustable of vertical position of head by geared-motor
- Head rotates 45º left or right of center
- Large worktable with 3 T-slots
- Hardened and ground high quality steel gears
- Gear box lubrication by automatic pump
- Guide ways lubricated by manual pump
- Speed plate and selecting levers on front of head
- High/low speed range selector
- Coolant tank and pump in machine base
- Co-ordinate cross slide table
- Automatic feed and cut-off by electromagnetic clutch
- Work light
- Front hand wheel for fine feed work
- Depth scale and adjustable depth stop
- Built-in low voltage electrical equipment in column rear
- Emergency STOP
- Spindle turn selection switch
- Drill guard with microswitch
30″ New Ibarmia Geared-Drive Column Drill Model BF35RS Optional Accessories:
| Factory Installed | |
| RPF-F Pitch Controlled Tapping w/ Braking System | $4,470.00 |
| HGP-F Master Guide Spindle w/ Nut Set | $860.00 |
| HGP-S-F Master Guide Spindle w/ Nut Set w/ Special Thread (inches etc.) | $1,070.00 |
| SC-F Column Riser | $1,755.00 |
| ENGX-F Motorized Gearbox Feed System in X | $5,205.00 |
| ENGY-F Motorized Gearbox Feed System in Y | $5,205.00 |
| LDG1-F DRO System (X axis) | $5,335.00 |
| LDG2-F DRO System (X, Y axis) | $10,805.00 |
| LDG3-F DRO System (X, Y, Z axis) | $12,855.00 |
| ISO-40-F ISO 40 Spindle | $710.00 |
| MB-F Security Bimanual Command | $1,505.00 |
| LBC-F Digital Readout Scale | $780.00 |
| All Accessories | |
| PST Cycle Start Foot Pedal | $835.00 |
| PSR Foot Pedal for Reversing (Must have the RS version) | $835.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
