Description
View this 31.25” x 37.5” Used Marvel Vertical Tilt-Frame Band Saw Model 800M in our warehouse in Columbus Ohio. This used marvel 800M vertical tilt frame band saw has low hours. It is in excellent condition and is ready to ship. Worldwide Machine Tool a MDNA member and out machines are guaranteed to run on delivery.
Used Marvel Vertical Tilt-Frame Band Saw Model 800M Specifications:
| Capacity: Nominal |
31.25″ x 37.5″
|
| Capacity: 45° Right |
31.25″ x 25.5″
|
| Capacity: 45° Left |
31.25″ x 24″
|
| Capacity: 60° Right |
31.25″ x 17.5″
|
| Capacity: 60° Left |
31.25″ x 15.75″
|
| Blade Drive |
Electric with sensorless vector control for smooth acceleration and full torque.
|
|
Speed Range
|
Infinitely variable: 60 to 400 FPM, 15 H.P. Standard. Blade speed can be automatically set when material is selected.
|
| Tilting Column |
For miter cutting up to 60° left and right of vertical. Variable speed, inverter driven, electronic tilt- Includes encoder feedback and touch screen display & control, for precision miter positioning. Electrically powered, chain driven, with encoder feedback and Amada Marvel PC3 controller.
|
| Touch Screen Control |
Blade speed, feed pressure and angles are selected using the convenient, operator friendly touch screen control.
|
|
3° Canted Column or Non-canted Column
|
Standard 3° forward approach angle for increased efficiency in cutting of structural materials.
|
| Feed Force |
Direct Force Sensing Electric Ball Screw Feed 0 – 350 lbs.; column travels on recirculating linear ball ways. Feed pressure can be automatically set when material is selected.
|
| Jammed Blade Protection |
Automatically senses resistance as the column returns and stops to prevent blade damage.
|
| Blade |
25′ Long x 2″ Wide, .063″. One Welded-Edge Band is furnished with each machine as part of standard start-up supplies
|
| Blade Guides |
Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self tensioning design.
|
| Blade Tension |
Hydraulically controlled, 32,000 psi. max. Machine equipped with automatic blade break/blade stall shut-off switch.
|
| Upper Blade Guide Arm |
Hydraulically positioned and locking, controlled by selector switch at operator’s station.
|
| Vises |
Hydraulic, full stroking with 12″ High x 20″ Wide 60° faceplates. Optional variable vise pressure available. An optional second machine vise is available.
|
| Coolant System |
Built-in with Flood system, available with Drop Lubrication system (requires compressed air connection), including chip pan with manual hand crank type chip conveyor. A Flushing hose is included to wash away chips from hard to reach places reducing clean-up time.
|
| Work-rest Rollers |
Two turned ball bearing rollers, one on the entry side and one on the discharge side of the machine bed.
|
| Standard Machine Color |
Machine Tool Gray.
|
| Standard Left-to-right Work Entry |
Opposite Hand or Right-to-Left work entry available.
|
| Table Height |
52″
|
| Motors |
Main Drive: 15 H.P. 1800 RPM, Coolant Pump: 1/2 H.P., Hydraulic Pump: 5 H.P. 1800 RPM
|
| Controls |
IEC fused disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage control to all push buttons at operator’s control panel and machine lighting circuits. PLC control and drives mounted in moisture tight compartment with vibration isolation mountings. Electrical Equipment conforms to National Electrical Code NFPA 79. The Electrical Control Panel is U.L. Labeled.
|
Used Marvel Vertical Tilt-Frame Band Saw Model 800M Standard Equipment:
- Tilting Column
- For miter cutting up to 60o left and right of vertical. Electronic tilt- The column is electrically powered, chain driven, with
encoder feedback and PC3 touch screen controller for precision miter positioning.
- For miter cutting up to 60o left and right of vertical. Electronic tilt- The column is electrically powered, chain driven, with
- 0° Column
-
This machine is equipped with a 90 degree non-canted column for notching & cutting rounds and pipe.
-
- Blade Guide
- Rotating Easy Load Combination Carbide and Ball Bearing
Roller guides with self-tensioning design.
- Rotating Easy Load Combination Carbide and Ball Bearing
- Upper Blade Guide Arm
- Hydraulically positioned and locking, controlled by a selector switch at the operator’s station.
- Work-Rest Rollers
- Two turned ball-bearing rollers, one on the entry side and one on the discharge side of the machine bed.
- Vises
- Hydraulic, full stroking with 9-1/2” high x 15” wide 60° faceplates. Optional variable vise pressure available (Option Code M9A).
- PC3 Programmable Control®
- Provides a Programmable Logic Control Unit with a 12” color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library.
- Variable Vise Pressure $550.00 included
- Second Vise $4,940.00 included
- Laser light $1,690.00 included
- 2 – 5′ Conveyors 18,600.00 included
Used Marvel Vertical Tilt-Frame Band Saw Model 800M demonstration video.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.
Reviews
There are no reviews yet.