Description
35″ New DoAll Vertical Zephyr Bandsaw Series ZV-3620 Specifications:
| Capacity | |
| Maximum width | 35.25″ |
| Max height under guide | 20″ |
| Max height at column | 15″ |
| Table tilt positive | 5° |
| Table tilt negative | 45° |
| Saw Blade | |
| Band width capacities | 0.25″ to 1″ |
| Blade length | 234″ |
| Band Drive | |
| Motor Hp | 15 Hp |
| Band speed (must specify range at order placement) | Low 1,000-4,000 fpm Medium 4,000-8,000 fpm High 10,000-15,000 fpm |
| Coolant System | |
| Flood | No |
| Mist lubricator | Opt |
| Floor Space Dimensions | |
| W x L x H | 82″ x 37″ x 104″ |
| Material pass height | 41″ |
| Machine weight | 4,500 lbs |
| Electrical | |
| Voltage requirement (Wye configuration) (must specify at order placement) | 208V, 230V or 460V-60Hz-3ph |
| Total amp draw (FLA) | 208V 64.1 amps 230V 47 amps 460V 28.5 amps |
35″ New DoAll Vertical Zephyr Bandsaw Series ZV-3620 Features:
- Column Mounted Controls: Column mounted controls give the operator easy access to band start and blade speed insuring their hands are away from the blade at band start.
- Variable Frequency Band Drive: Band drive is comprised of an electric variable frequency drive controlled motor transferring power thru our time honored, belt driven high-speed spindle giving maximum torque to the tooth tips of the saw blade reducing band stall and tooth strippage.
- Hydraulic Powered Post: Easy to operate hydraulic post allows the operator to keep the upper saw guide block as close to the top of the material being cut without getting their hands close to the blade during adjustment. Proper positioning minimizes the possibility of band deflection increasing bad life and safety.
- Bandwheels: Cast aluminum, crowned band wheels, are supplied with replaceable rubber tires to minimize wheel wear and insure proper band tracking. The tires allow for minimum damage to the set of your saw band.
- Manual Band Tension: Proper blade tension is manually set to a factory installed indicator which covers all widths of saw bands. This indicator will prevent the possibility of over/under tightening of the saw band for maximum cutting rates and extended band life.
- Band Tracking System: Lever tracking mechanism allows for ease of blade alignment on band wheels reducing band fatigue by assuring proper support to the back of the saw band.
- Saw Guide: Machine is equipped with one set of DoALL High-Speed, Type 3, saw guide blocks and rollers which will handle 1″ saw band. These will allow proper support to the side and back of the band minimizing deflection due to overfeed conditions in high band speed operations.
- Safety Systems: Band door interlocks prevent the starting of the saw band while the doors are open. They will also stop the band drive if the doors open during operation which protects the operator from being exposed to a moving band. The upper wheel has a hydraulic actuated disk brake, which is applied when band breakage occurs preventing injury. The lower wheel is controlled by a dynamic brake, which is applied at band drive deactivation preventing operator injury.
- Warranty: One year parts and service subject to the terms and conditions listed on terms and conditions page. Optional ten year warranty is available.
35″ New DoAll Vertical Zephyr Bandsaw Series ZV-3620 Standard Equipment:
- Table tilt to 45 degrees negative – 5 degree positive
- 36″ Crowned aluminum band wheels with replaceable rubber tires
- Upper wheel adjustment 3″
- Operator controls mounted on column
- One set of high speed, type 3 guide blocks with 1″ rollers
- Work light
- Variable frequency band drive
- Tapered high-speed roller bearing spindles
- Manual band tension with indicator
- Hydraulic upper saw guide post
- Dust spout for exhaust connection
- Spark guard
- Saw blade guards
- Band door interlocks
- Operation and parts manuals on USB stick
- Trunnion wrench
- One (1) complimentary DoALL bi-metal saw band
35″ New DoAll Vertical Zephyr Bandsaw Series ZV-3620 Accessories:
| 60000831 Free Standing DBW-15 blade welder for carbon, Dart & BiMetal saw blades up to 1″ (25mm) wide. Flash Grinder & blade shear are included | $4,780 |
| 221209 Chip blower (requires plant air) | $516 |
| 221552 Band mist lubricator (requires plant air) | $1,860 |
| 35-009862 Secondary table 19″ x 19″ | $1,800 |
| 500542 Standard rip fence for 30″ x 30″ table | $800 |
| 40044 Disk cutting attachment. Capacity up to 36″ diameter | $1,672 |
| DoALL Type III super saw guides for heavy-duty and high-speed sawing. Roller type with double-saw ball bearings, including a set of rollers for any single width of band: | |
| 80011 1/4″ guides, per set | $3,919 |
| 80013 3/8″ guides, per set | $3,919 |
| 80014 1/2″ guides, per set | $3,919 |
| 80015 5/8″ guides, per set | $3,919 |
| 80016 3/4″ guides, per set | $3,919 |
| 80017 1″ guides, per set | $3,919 |
| Extra sets of rollers for any single band width | |
| 80024 1/4″ guides, per set | $1,006 |
| 80025 3/8″ guides, per set | $1,006 |
| 80026 1/2″ guides, per set | $1,006 |
| 80027 5/8″ guides, per set | $1,006 |
| 80028 3/4″ guides, per set | $1,006 |
| 80029 1″ guides, per set | $1,006 |
| 299998 Additional USB stick of manuals | $91 |
| 226028 Magnetic wand chip remover | $185 |
| 310136234 19′ 6″ x 0.035″ x 10 T Friction | Call for pricing |
| 21200045 5 Gal. Pail of AL-2000 Mist Coolant | $240 |
| 24000001 Tool-Saver lubricant stick | $14 |
Please specify the electrical voltage requirement during the order placement: 230V, or 460V-60Hz-3ph Wye configuration.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.