New 36" DoAll vertical bandsaw

36″ New DoAll Vertical Contour Band Saw Model 3613-V3

The DoALL 3613-V3 vertical contour band saw features variable frequency 3 hp (2.23kW) AC inverter drive controls that start the motion of the band wheels slowly to reduce mechanical shock and increase drive train life, plus a dynamic braking function that rapidly stops motion when power is shut-off. The 3613-V3 upright metal cutting band saw, with a 36″ (915mm) cutting capacity, is widely used in machine shops, maintenance departments, schools and other areas where cutting a wide variety of materials is required.

Options

SKU: 13090 Categories: ,

Description

The DoALL 3613-V3 vertical contour band saw features variable frequency 3 hp (2.23kW) AC inverter drive controls that start the motion of the band wheels slowly to reduce mechanical shock and increase drive train life, plus a dynamic braking function that rapidly stops motion when power is shut-off. The 3613-V3 upright metal cutting band saw, with a 36″ (915mm) cutting capacity, is widely used in machine shops, maintenance departments, schools and other areas where cutting a wide variety of materials is required.

36″ New DoAll Vertical Contour Band Saw Model 3613-V3 Specifications:

Specifications  
Capacity Inches
Maximum width 36″
Maximum height 13″
Table tilt positive 10°
Table tilt negative 45°
Saw Blade  
Band width capacity 1/8″ – 1″
Band length 199″
Band Drive  
Motor 3 Hp
Band Speed Low range: 30-320 fpm
High range: 550-5,500 fpm
Band Tension Manual
Coolant System  
Flood No
Mist lubricator Opt
General  
Floor Space Dimensions W x L x H 39″ x 81″ x 82″
Material pass height 39″
Machine weight 1,550 lbs
Electrical  
Voltage requirement (Wye configuration-must specify at order placement) 208V, 230V, or 460V-60Hz-3ph
Total Amp Draw (FLA) 10.7 (208)
10.7 (230)
5.3 (460)

 

36″ New DoAll Vertical Contour Band Saw Model 3613-V3 Standard Equipment:

  • Table tilt to 45 degrees negative-10 degrees positive
  • 20″ aluminum band wheels with crowned rubber tires
  • Upper wheel adjustment 3″
  • Operator controls mounted on column
  • One set of high speed, insert type guide blocks for bands 1/8″ to 1/2″
  • One set of steel guide inserts for bands 1/4″, 3/8″, 1/2″
  • Band wheel brush
  • Variable frequency band drive
  • Work light
  • Manual band tension with indicator
  • Post elevating hand wheel
  • Chip box
  • Chip blower (plant air required)
  • Saw blade guards
  • Band door interlocks
  • Operation and parts manuals on USB stick
  • Recommended job selector
  • One (1) complimentary DoAll Bi Metal saw blade
  • Insert setting gages with wrench and trunnion wrench

 

36″ New DoAll Vertical Contour Band Saw Model 3613-V3 Optional Accessories:

299685 Secondary table 17″ x 19″ $1,860
CMI-080 12″ Travel glide table with (2) point safety buttons on the handles for blade start $9,085
CMI-081 18″ Travel glide table with (2) point safety buttons on the handles for blade start $11,755
40363 Work holding vise to fit table “T” slots $1,176
HMD-36 Extended traverse work table: 1100 lb. capacity, four (4) 2″ T-Slots, 34 x 42″ table area, reduces work height by approximately 4″ $27,611
299551 DBW-15 welder with grinder, column mounted, for 240 volts and below $4,119
299550 DBW-15 welder with grinder, column mounted, for 460 volt $4,119
Extended work height 6 inch increments-call for quote Call
5-013007 Work holding jaw with handles $404
420288 Band mist lubricator (80 psi plant air required) $1,860
47779 Standard rip fence that attaches to 26″ x 26″ table $1,037
55305 No. 2 standard cut-off and mitering attachment for 26″ x 26″ table $1,175
402080 Disk cutting attachment: capacity 2-1/2″ to 30″ diameter $2,235
226028 Magnetic wand chip remover $195
80077 High-speed guide blocks for bands 1/8″ to 1/2″, speeds to 6,000 fpm less inserts (per pair) $418
80080 Heavy-duty (high-speed) saw guide blocks for bands 1/8″ to 1/2″, speeds to 6,000 fpm less inserts (per pair) $533
80079 Heavy-duty (high-speed) saw guide blocks for bands 5/8″ to 3/4″, speeds to 6,000 fpm less inserts (per pair) $583
80082 Heavy-duty (high-speed) saw guide blocks for 1″ band, speeds to 6,000 fpm less inserts (per pair) $910
80081 Heavy-duty (high-speed) saw guide blocks with carbide-faced backup for bands 1/8″ to 1/2″, speeds to 6,000 fpm less inserts (per pair) $758
80085 Heavy-duty (high-speed) saw guide blocks with carbide-faced backup bearings for 5/8″ and 3/4″ bands, speeds to 6,000 fpm less inserts (per pair) $933
80162 Heavy-duty (high speed) saw guide blocks with carbide-faced backup bearings for 1″ bands only, speeds to 6,000 fpm less inserts (per pair) $933
Additional set of hardened tool steel reversible saw guide inserts (set of 4) for any single band width  
80039 1/8″ $189
80040 3/16″ $98
80041 1/4″ $98
80042 3/8″ $98
80043 1/2″ $98
80044 5/8″ $98
80045 3/4″ $98
80046 1″ $98
Optional tungsten-carbide, single-faced saw guide inserts (set of 4) for any single band width  
80100 1/4″ $583
80101 3/8″ $583
80102 1/2″ $583
80103 5/8″ $583
80104 3/4″ $583
80105 1″ $583
80142 Type I high-speed roller guide blocks, less rollers (per pair) $1,158
Set of rollers for band saw width (must purchase 80142)  
80089 1/4″ $2,163
80092 3/8″ $2,163
80093 1/2″ $2,163
80094 Type II high-speed roller saw guide blocks, less rollers (per pair) reduces work height 1″ and restricts table tilt to 27″ $1,788
Set of Type II rollers for band saw width (must purchase 80094)  
80095 1/4″ $2,163
80096 3/8″ $2,163
80097 1/2″ $2,163
80098 5/8″ $2,163
80099 3/4″ $2,163
80047 1″ $2,163
299998 Additional USB stick of manuals $92
NRTL A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards $3,500
SVC CHARGE LABOR Five (5) hours installation and operator training $750
Warranty DoALL Cut Above 10 Year Warranty Annual Investment $840
1200026 Starter Kit of Six Pack Blades Consist of 3 each Silencer GP 5-8, and 1 of each Silencer GP 6, 6-10, 8-12 $364
21200045 5 Gal. Pail of AL-2000 Mist Coolant $240
24000001 Tool-Saver lubricant stick $14

 

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.