Description
39.5” x 43″ New Marvel Horizontal Band Saw Model PB 4043 Specifications:
| Capacity |
39.5” x 43″ Rectangle (1003 x 1092mm), 40” Round (1016mm), 15.75” Min, Clamp Width
|
| Blade |
3” x 36’ 5” x .063” (11,100 x 80 x 1.6mm)
|
| Blade Tension |
Hydraulically controlled tension (40,000 psi) provides consistent square cutting accuracy. The Motion Detector will shut the machine off should the blade break or stall.
|
| Speed Range |
50 – 245 SFPM (15-75m/min.) infinitely variable through a frequency inverter system and a heavy-duty Worm Gear Transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An Electric Tachometer assures accurate speed settings.
|
| Hydraulic Down Feed |
Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the best setting for the best setting for the type of material being cut.
|
| Hydraulic Shuttle Table |
The 38” (970 mm) x 63.5″ (1615 mm) has five, 5” diameter rollers that move the material to and from the saw. The entire table assembly rides on steel ways. The shuttle table work height is 24” and has a 19.5″ stroke.
|
| Motors |
Blade Drive: 15 H.P. (11.25 kW), Hydraulic Pump Motor: 5 H.P. (3.7 kW), Coolant Pump Motor: 1/4 H.P. (.1875 kW)
|
| Blade Guides |
A combination of roller bearing and hydraulic actuated carbide blade guides assure the blade is held taut for fast, accurate cuts. The cast iron Movable Guide Arm is positioned through an Electric Motor, than is Hydraulically Locked in position.
|
| Chip Brush |
Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance.
|
| Height Selector |
To reduce the machine’s cycle time, the upward return of the saw frame can be limited through a variable height selector and can be set from 0-39-1/2″. At the completion of the cut, the saw frame automatically returns to the up position.
|
| Anti-vibration Roller |
To reduce blade vibration upon entry into the work piece, a blade stabilizer roller is provided and aids in producing straighter cuts and helps to extend blade life with significantly less noise and vibration.
|
| Cut indicator light |
The cut line indicator light is positioned on the dovetail above the blade and casts a shadow indicating the true cut line which aids in set-up and assures first cut accuracy.
|
| Vise Jaws |
Two sets of vise jaws assures that even the largest piece of material will be held securely. The work piece is held on both sides of the blade, reducing cutting vibration which provides better blade life. Each vise can provide up to 5000 lbs. of clamping force.
|
| Weight Capacity |
The machine’s weight capacity is 40,000 lbs. allowing cutting of solids and billets to the machine’s maximum capacity.
|
39.5” x 43″ New Marvel Horizontal Band Saw Model PB 4043 Standard Features:
- Blade breakage/motion detector
- Independent driven blade cleaning brush
- Saw frame height selector gauge
- Cut line light
- Hydraulically clamped carbide blade guide system
- Material positioning via a hydraulic vise
- Material positioning via a movable table
- Powered movable guide arm with hydraulic lock
- Anti-vibration roller
- Two sets of full stroke vise jaws – one on each side of the blade
- Automatic chip conveyor
- One bi-metal saw blade
- One set of tools
- Out of square detector
39.5” x 43″ New Marvel Horizontal Band Saw Model PB 4043 Optional Accessories:
- Out-of-square Detector
- Dead Roller Table 9’
- Power Roller Table 9’
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.