78.74″ x 80.7″ x 59.05″ New Femco CNC Horizontal Boring Mill BMC-110T2

This Femco 4.3″ BMC-110T2 CNC Horizontal Boring & Milling Machine features:
• X-, Y-, Z-Axes Linear Scales
• Saddle Slideway Cover
• Working Light
• Anchors and Levels for Installation
• Rotary Table, 90 Degree Precision Indexing
• Table Slideway Cover
• X-, Y-, Z-Axes Ball Screw Cover
• Headstock Cooling System
• Operator’s Manual

F.O.B.  Factory


4.3″ New Femco CNC Horizontal Boring Mill BMC-110T2 Specifications:

Table Cross Travel (X-Axis) 78.74″
Headstock Travel (Y-Axis) 80.7″
Table Longitudinal Travel (Z-Axis) 59.05″”
Table Size 56.69″ x 62.99″
Table Load 17,600 Lbs
Bar Diameter 8.86″
Stroke (W-Axis) 19.69″
Taper ISO #50 with Power Operated Drawbar
Tool Shank CT50 (BT50 Optional)
Pull Stud (Option MAS-I) MAS-II 60 deg
Motor (Continuous/30 min Rated) AC 22/26 KW (29.5 / 35 HP)
Speed Ranger-Low Stepless 5 – 454 RPM
Speed Ranger-High Stepless 455 -2500 RPM
Automatic tool changer (ATC):  
Tool Storage Capacity 60 ATC Standard, 90 ATC Optional
Max. Tool Diameter (Adjacent Pods Full) 4.9″
Max. Tool Diameter (Adjacent Pods Empty) 9.8″
Max. Tool Length 15.75″
Max. Tool Weight 55 Lbs.
Tool to Tool Exchanging Time 13 sec
Tool Selection Method: Automatic Selection of the Shortest Route
Positioning servo motor:  
X-Axis 8 HP
Y-Axis 9.4 HP
Z-Axis 8 HP
W Axis 5.4 HP
Rotary Table 5.4 hp
Feed rate in all Axes 0 – 197″ mm/min (stepless)
Positioning Accuracy X, Y, Z, and W-Axis 0.025/300mm (0.001″/11.81″)
Repeatability X, Y, Z, and W-Axis ±0.01mm (±0.0004″)
Control Axes 5
W-Axis 4
B-Axis 5
Rapid Traverse Rate  
X-, Y-, Z-Axis 394″ IPM
W-Axis 157″ IPM
Rapid Rotation of Rotary Table 3 RPM
Machine Dimensions and Net Weight:  
Height 161.4″
Floor Space 308″ x 244″
Net Weight 41,887 Lbs
Power Requirements 220 Volts 3 Phase 60 Cycle 200 Amps 440 Volt Transformer on Request

All major components are fully ribbed close grain Meehanite castings completely stressed relieved before machining. The vertical column walls are thick and cross ribbed, the front vertical way is massive and is offset 3 ½” from the back way to absorb any radial thrust generated during heavy machining operations and to guarantee accuracy, rigidity and longevity.

Ways are induction hardened to 55-60 C.X.100 deep and are precision ground. Headstock, column base, and cross slides are lined with turcite (A LOW FRICTION MATERIAL). Turcite provides excellent wear and slip stick characteristics due to its low coefficient of friction. It also provides good vibrational damping. Turcite reacts with the machine structure thus giving a high static and dynamic stiffness to the machine.

Lubrication to all axis is done automatically to ensure longevity of the ways.

Large 3” diameter precision angular contact ball screws are pre-loaded with the nut when installed. This ensures zero-backlash and smooth motion through the machining process.

The spindle is made from chromium molybdenum steel alloy. The spindle and the sleeve surfaces are hardened in a nitrating process, then ground and lapped, thus, insuring high rigidity for a smooth surface and long life. Class 7 bearings are used in all our spindles.

The table is clamped by six (6) hydraulic clamps at a massive 315-320 KG/CM-2 clamping force. Hydraulic shot pins provide location every 90 degrees which is programmable. Angles between 0 and 360 degrees can be positioned manually.

Precision glass scales are installed on X-Y-Z axes insuring accuracy and repeatability in your environment. These scales are independent of the drive system.

4.3″ New Femco CNC Horizontal Boring Mill BMC-110R2 Features:

  • Controlled 5 Axes
  • Simultaneous Controllable 4 Axes
  • Reference Point Return (G27, G28)
  • Linear Interpolation
  • Circular Interpolation
  • 10.4” CRT/MDI (Small Type) / (Full Key)
  • Registered Programs 63
  • Part Program Stored Length 80m
  • Sequence Number Search
  • Program Number Search
  • Manual Pulse Generator
  • External Work Number Search
  • Program Protect
  • Inch/Metric Switching
  • Machine Lock
  • Backlash Compensation
  • Program Protect Signal
  • Self-Diagnosis Function
  • Read/Puncher Interface
  • Direct Input of Meas. Work Coord. Sys. Shift
  • EIA/ISO Automatic Recognition
  • Mirror Image
  • Actual Speed Display
  • Work Coordinate System G54 – G59      
  • Canned Cycle for Hole Machining
  • Tool Compensation Memory 99 sets

New Femco 4.3″ BMC-110T2 CNC Horizontal Boring & Milling Machine Equipped with:

  • Saddle Slideway Cover
  • Working Light
  • Anchors and Levels for Installation
  • Rotary Table, 90 Degree Precision Indexing
  • Table Slideway Cover
  • X-, Y-, Z-Axes Ball Screw Cover
  • Headstock Cooling System
  • Operator’s Manual

4.3″ New Femco CNC Horizontal Boring Mill BMC-110T2 Options:

  • Full B Axis Table…Included
  • 90 Tool ATC…$ 60,000.00
  • Spindle extension sleeve 300mm…$1,500.00
  • Chip Conveyor…Included
  • Fanuc 32i control…$ 15,500.00
  • Coolant thru spindle…Included

New Femco 4.3″ BMC-110R2 CNC Horizontal Boring Mill video

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/