40″ x 40″ New Clausing Horizontal Bandsaw Model H4040NC

Description

40″ x 40″ New Clausing Horizontal Bandsaw Model H4040NC Specifications:

40″ x 40″ New Clausing Horizontal Bandsaw Model H4040NC Features:

• The rigid twin columns guide the sawhead for a more powerful, smooth and accurate cutting and provide the cutting forces distributed from top to bottom of the machine frame during the cutting period
• When the blade descends and approaches the work, the descending speed will be automatically changed over to normal cutting down feed space, reducing set up idle time and cycle time
• Both jaws of the feeding vise open (retract) and close simultaneously, assuring smooth material feeding, especially excellent for misaligned or curved material
• After cut off, the feeding vise can automatically retract the material 2 mm clean off the cut off piece before the sawhead is going up which is helpful to prolong the blade life
• Automatic hydraulic tension device will provide tension to blade when machine is turned on and will release tension when turned off, extending blade life. The On-Off switch is an added feature-making blade changing quicker and easier
• The bearing guides eliminate stress by pre-aligning the blade before it enters the carbide. There are two extra bearings located on a central axis, which supports the blade from the top, giving it extra penetrating force. The grooved carbide guide allows coolant to lubricate and cool blade as well as work piece
• The hydraulic chip conveyor features shaftless design which is more convenient and effective for chips removal. Also, the hydraulic motor does not burn out like traditional electric motors
• With hydraulic driven guide arm, the user doesn’t need to shift the guide arm in manual
• With hydraulic controlled blade clamping, the user doesn’t need to manually tighten the blade clamping
• Mitsubishi Control System: It is programmable to build 100 different jobs including cutting length and workpiece in memory. After receiving the operating information, the machine will do the indexing and kerfs compensation automatically. Cutting job will stop when the cutting piece is reached, no more calculation on feeding length and feeding time. Having the error feedback function, the vary error code will indicate the error state of the machine and the engineer is able to fix the error conveniently and quickly. It features:
  • LCD Screen
  • Film Type Key Pad
  • Blade Speed Display
  • Blade Life Indicator
  • Feeding Vise Position Display
  • Automatic Kerfs Compensation and Multi-Indexing
  • 2mm rear vise retracting (The rear vise will automatically retract the material 2mm cleaning)
  • Work Light Selector
  • Coolant Liquid Selector
  • 100 steps programmable cutting modes for different cut-off length and quantity
  • Any stored program can be easily recalled and executed repeatedly
• Control & Automation:
  • The operator’s control station located independently from the saw is convenient and user friendly. All operator controls are positioned on the top of the control box and clearly labeled for ease of operation. The electrical components are located inside the control box with the main lockout disconnect on the front of the control box for safety and easy maintenance.
  • Smart NC-20 (SNC20) technology provides most of the benefits of NC controlled saws at a mere fraction of the cost. SNC20 controls are programmable to 20 different jobs including quantity and length of cut. The control automatically compensates for Kerf loss after data input and requires no manual calculation of number of times to index. The control also automatically shuts down the machine, blade motor and hydraulics, once the programmed number of cuts or out of stock situation has been achieved. The system includes an error feedback function enabling rapid troubleshooting through an error code to be displayed in the event of a malfunction.
• SNC-20 Features include: 
  • Key pad entry of programmable quantity and length of cut with automatic shut-off for finished job(s) or out of stock
  • Stored program(s) may be easily recalled and executed at will
  • LCD Screen with Film Type Key Pad
  • Blade Speed Display
  • Blade Life Indicator
  • Feed Vise Position Display
  • Error Code Display Provides amplified self-diagnostics
  • Precision feed pressure and feed rate dual system for optimal cutting performance in any model
  • Selector Switch for bundle or single cutting modes
  • Automatic work height sensor and air gap eliminator positions the saw frame to a safe clearance above the work piece, so that the next piece can be positioned without damaging the blade. After feeding, the saw head will descend quickly to within approximately 3 mm of work piece, where it proceeds at the pre-determined cutting rates.
• Material Clamping & Feeding:
  • Double retracting vise jaws. Both jaws of the index vise open (retract) and close assuring smooth material feeding, especially helpful for misaligned or cambered material
  • Full stroke hydraulic front and rear vises enable clamping and unclamping of any material from the operator’s control station with touch of a button
  • Ductile cast iron vise with replaceable hardened wear plates
  • Smart NC Controlled Multiple indexing for long cutting lengths of up to 6500mm maximum length, utilizing full shuttle length every index until desired length is reached
  • Multiple horizontal rollers strategically located throughout the saw work bed to facilitate smooth obstacle-free feeding of even the heaviest material
• Safety:
  • Idle wheel motion proximity switches sense both blade slippage and blade breakage and will automatically shut off the machine if either of these conditions should occur
  • All blade covers and guarding on the saw are painted Alert Orange to increase safety alertness
  • All exposed electric wiring and hydraulic circuit are protected by conduits
  • Electrical and hydraulic safety interlock prevents saw blade to start without vises securely clamped
• Numerical Control System (Mitsubishi Control)
• Inverter for infinitely blade speed control. (Available for voltage under 460v)
• Hydraulic double action vise (double retracting type)
• Wire brush with drive shaft driven by separate brush motor
• Hydraulic shuttle vise with automatic indexing feed
• Automatic work height and quick approach control system
• Multiple indexing control
• Pre-set cut-off piece counter with automatic power shut-off function
• Adjustable guide plate for cut-off piece
• Additional coolant nozzle for cutting large section piece
• Beam light
• Flushing hose for wire brush and machine cleaning
• Vise clamping indicator and out of stock sensor
• Idle wheel motion detector
• Self-lubricating carbide blade guide and guide roller
• Selector for shuttle vise positioning of bundle or single stock cutting
• Precision pressure and feed rate dual valve
• Integral coolant system
• Chip conveyor
• Load meter
• Work height detector
• Blade clipping device for one operator changing of blade
• Rigid frame type with gauge meter and guide arm support
• Independent control station
• One piece of Bi-Metal M42 saw blade
• Tools with toolbox
• Operation manual and parts book

40″ x 40″ New Clausing Horizontal Bandsaw Model H4040NC Optional Accessories:

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on Twitter, Facebook, Youtube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/