Description
43.3″ x 23.6″ x 22″ New Femco Vertical Machining Center Model MCV-1100 has a wide box way design with sliding surfaces lined with Turcite-B for superior antifriction properties. The box ways are square and reinforced to guarantee smooth, stable precision machining. FEMCO-FIRST MCV-1100 inherent rigidity permits high speed and high-volume metal removal in steel, aluminum, brass, plastic and many other materials. The base is easily capable of supporting heavy loads and has been designed to maintain its integrity for many years.
43.3″ x 23.6″ x 22″ New Femco Vertical Machining Center Model MCV-1100 Specifications:
| Table | |
| Table Size Overall | 51.3″ x 23.6″ |
| T Slot (Number x width x pitch) | 6 x .7″ x 3.9″ |
| Table Load | 2,200 Lbs. |
| X, Y, Z Axis Travel | 43.3 x 23.6″ x 22.0″ |
| Spindle Nose To Table | 3.9″- 25.9″ |
| Spindle Center To Column | 25.6″ |
| Spindle | |
| Spindle Taper | CT-40 |
| Pull Stud | CT-40 |
| Spindle Speeds | 10,000 RPM |
| Horsepower | 15/20 HP |
| Transmission | Direct Drive |
| Feed Rates | |
| Rapid Traverse X, Y, Z Axis | 787 IPM, 787 IPM, 591 IPM |
| Feed Rate X, Y, Z-Axis | .04 – 393.7 IPM |
| Automatic Tool Changer | |
| Magazine Capacity | 24 Tool Side Mount, Dual Arm |
| Maximum Tool Length | 13.8″ |
| Maximum Tool Diameter | 4.3″ |
| Without Adjacent Tool | 7″ |
| Maximum Tool Weight | 33 Lbs |
| Tool Change Time (Tool to Tool) | 2.5 Seconds |
| Tool Change Time (Chip to Chip) | 7 seconds |
| Method of Tool Selection | Random, Bi-Directional Rotation |
| Coolant System | |
| Coolant Tank Size | 128 Gallons |
| Coolant Capacity | 27.75 Gallons per Minute |
| Machine Size | |
| Floor Area (L x W x H) | 169″ x 95″ x 114.7″ |
| Net Weight | 16,940 Lbs |
| Air Required | 85 PSI |
| Power required | 220 Volt AC, 3 Phase, 25 KVA |
43.3″ x 23.6″ x 22″ New Femco Vertical Machining Center Model MCV-1100 Features:
- Mating surfaces are precision hand scraped
- Sliding surfaces are coated with Turcite-B for antifriction properties
- MEEHANITE cast iron used for all major machine components
- Preloaded double nut ball screws on X,Y,Z axis
- Automatic lubrication system
- Rigid 10000 rpm spindle
- Full enclosed splashguard
- 24 Station ATC
- Box way construction on all three axes
- Major components are heavily ribbed reinforced for outstanding stability
- Extra heavy duty designed column and base for extra rigidity for milling
- Open top front door design allows for easier operator setup
- Refrigerated spindle chiller
43.3″ x 23.6″ x 22″ New Femco Vertical Machining Center Model MCV-1100 Standard Accessories:
- FANUC OI SYSTEM
- Controlled Axis (X, Y, Z)
- Simultaneous 3 Axis Control
- Custom Macro B
- Positioning (G00)
- Linear Interpolation (G01)
- Multi Quadrant Circular Interpolation
- Feed Rate Override: (10% Increments)
- 0-150% Rapid Traverse Override: FO, 25%, 50%, 100%
- Automatic Acceleration/Deceleration
- Exact Stop/Cutting Mode: (G09, G61, G63, G64)
- Dwell (G04)
- Reference Point Return: (G27, G28, G29 Manual)
- Work Coordinate System Change (G92)
- Absolute/Incremental Programming (G90, G91)
- Decimal Point Input
- S Code Output
- T Code Output
- M Code Output
- Program Number/Program Name
- Program Number Search
- Main Program / Subprogram
- Tape Code (EIA, RS 244, 1SO840)
- Optional Block Skip
- Radius Designation
- Tool Length Compensation (G43, G44, G49)
- Tool Offset Amount Memory 32 Pairs
- Backlash Compensation
- Follow – Up
- Mirror Image
- Cycle Start / Feed Hold
- Buffer Register
- Program Stop/Program End (M00, M01, M02, M30)
- Reset / Rewind
- Manual Continuous Feed
- Incremental Feed
- Manual Absolute On / Off
- Machine Lock
- Auxiliary Function Lock
- Dry Run
- Single Block
- Data Protection Key
- Part Program Storage & Editing
- Background Editing
- Registered Programs (63)
- Self – Diagnosis Function
- Emergency Stop
- Stored Stroke Check 1
- Interlock
- External Power On / Off
- Canned Cycles (G73, G74, G76, G80, G89)
- Cutter Compensation C (G40-G42)
- Stored Pitch Error Compensation
- Manual Pulse Generator
- CRT: 9” Monochrome
- Input / Output Interface
- Inch / Metric Conversion
- Skip Function
- Second Reference Point Return
- Fanuc Control
- Auto Lube System
- Arm Type ATC 24 Tools
- Spindle Chiller
- Work Light
- Spindle Coolant System
- Chain Type Chip Conveyor
- Spindle Load Meter
- Full Enclosure
- Spindle RPM Meter
- Chip Flush System
- Coolant Gun
- Air Gun
- Door Lock
- RS232 Interface
- Alarm Light
- Operations, Control and Maintenance Manuals
- CE Safety Door Interlock
- Spindle Air Blow
- Tool Box
- Leveling Bolts, Pads & Nuts
- Telescopic Way Covers
- Portable Electronic Hand Wheel
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
