Description
44” x 27” New Marvel Horizontal Mitering Band Saw Model WS2543M Specifications:
Cutting Capacity | |
Round (diameter) at 90° | 28″ |
Round (diameter) at 45° | 28″ |
Round (diameter) at 60° | 25.6″ |
Rectangle (W x H) at 90° | 44″ x 27″ |
Rectangle (W x H) at 45° | 25.6″ x 27″ |
Rectangle (W x H) at 60° | 15.7″ x 25.6″ |
Work Load Capacity | 11,020 lbs |
Saw Blade | |
Blade Size (L x T x W) | 28’6-1/2″ x 0.063″ x 2″ |
Blade Speed | 98-361 ft/min by Inverter |
Tension Control | Hydraulic |
Blade Control | |
Top Limit Setting | Automatic Setting with Fast Approach Feeler |
Cutting Control | Hydraulic Pressure & Flow Control Valve |
Vise Operation | |
Type | Split Vises and Vertical Clamp Device |
Control | Hydraulic Full-Stroke Cylinder |
Motors | |
Saw Blade | 10 HP |
Cutting Fluid Pump | 1/4 HP |
Hydraulic Pump | 3 HP |
Roll Motor | 1.5 HP |
Table Rotation | 1/2 HP |
Power Requirement | |
Power Supply Voltage | AC230V±10%, 3 PH, 60 Hz, Voltage must be specified when ordering |
Power Requirement | N/A |
Cutting Fluid | |
Tank Capacity | 47.5 gal |
Hydraulic | |
Tank Capacity | 19.8 gal |
Pressure Setting | 1067 psi |
Chip Disposal | Chip Conveyor |
Material Index | |
Index Mechanism | Shuttle Vise |
Stroke | 59″ |
Length | 0″ – 393.6″ |
Machine Dimensions (W x L x H) | 179″ x 89.4″ x 101″ |
Table Height | 32′ – 33′ |
Machine Weight | 11,880 lbs |
44” x 27” New Marvel Horizontal Mitering Band Saw Model WS2543M Features:
- SAW FRAME: The saw frame is canted at a 6.5 degree angle for faster cutting of structural and other flat materials. The heavy duty saw frame rides up and down a linear way guide system.
- MITER CUTTING: The WS2543M model has a saw base that swivels to 45 degrees one direction and 60 degrees the other, for miter cutting. A ½ hp (400 W.) motor turns the machine base and the degree of angle is read out on a LED DISPLAY
- SPEED RANGE: 98-361 FPM (30-110m/min.). Infinitely variable through a frequency inverter system and a heavy duty Worm Gear Transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An Electric Tachometer assures accurate speed settings.
- HYDRAULIC DOWN FEED: Feed rate and down pressure can be controlled for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut.
- BLADE GUIDES: A combination of roller bearing and hydraulically actuated carbide blade guides assures the blade is held taut for fast, accurate cuts. The cast iron Movable Guide Arm is positioned through a Hydraulic Cylinder, then is Hydraulically Locked in position.
- FAST APPROACH: Work height is manually set allowing the head to raise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
- CHIP BRUSH: An Independent Motor drives the blade cleaning Chip Brush to assure complete removal of chips from each gullet of the blade, providing optimum cutting performance and enhanced blade life.
- VISE JAW: Full Stroking Vise Jaw and a Vertical Clamp Device assure the work piece is secure and eliminates excessive vibration during the cut providing better blade life and cleaner cuts. Minimum Clamping Capacity is 7.5” (190mm) width.
- CONTROLS: An Independent Electric Cabinet and Control Panel allow the operator to position the controls for optimum viewing of the cutting area. A PLC controls all electrical and hydraulic functions.
- AMADA SST-WS BLADE: Amada SST Wide Set blade 28’6-1/2” long x 2” wide, 3/4 tooth pitch. This is the standard blade that is included with machine purchase.
44” x 27” New Marvel Horizontal Mitering Band Saw Model WS2543M Optional Accessories:
Automatic Chip Conveyor | N/A |
Hydraulic Hold Down | N/A |
Dead Roller Table | N/A |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.
Reviews
There are no reviews yet.