14″ x 59″ New Clausing Vertical and Horizontal Mill Model 2500M

Price On Request
F.O.B. Factory
Terms: Check with order




59″ x 14″ New Clausing Vertical and Horizontal Mill Model 2500M Specifications:

Table area 59″ x 13.7″
Total load capacity 1,540 lbs
No. of T-slots 5
Distance between T-slots 2.36″
T-slot size 0.629″
Table rotation 45º right/left
X automatic longitude 45.27″
Y automatic cross 15.74″
Z automatic knee 19.68″
Distance from spindle to overarm 6.1″
Spindle (Horizontal)  
Spindle taper ISO-40
Diameter of the main shaft nose 3.5″-5.06″
Milling arbor 1″
Number spindle speeds 12
Spindle speed range 40 – 1800 rpm
Spindle motor HP 7.5
Spindle (Vertical)  
Spindle taper ISO-40
Quill diameter 4.92″
Quill travel 3.94″
Number spindle speeds 12
Spindle speed range 35 – 1600 rpm
Spindle motor HP 5.5
Longitudinal & cross feeds 0.393″ – 47.55″/min
Vertical feed 0.196″ – 23.77″/min
Feed motor HP 2.5
Rapid Traverse  
Longitudinal & cross feeds 47.55″/min
Vertical feeds 23.77″/min
Cooling pump 1/8 Hp
Net weight 7,040 lbs
Shipping weight 7,770 lbs
Shipping dimensions (L x W x H) 70″ x 89″ x 88″


Standard Equipment:

  • X, Y & Z Infinitely variable speed is achieved by an inverter through the gear box and controlled at the operator friendly control panel
  • Rapid traverse on X, Y & Z axis
  • Variable speed on X, Y & Z axis
  • High quality meehanite casting for superior rigidity and wear resistance
  • All gears and shafts are hardened and ground
  • Large 13.7” x 59” (350 x 1500mm) table with 5 T-slots
  • Table swivels 45° left and right
  • Huron Swivel Head on ram with manual moving quill
  • Extra large square and dovetail square slide ways for greater accuracy
  • 27mm ONG horizontal milling arbor & two (2) supports (“carrier bearing”)
  • All slide ways and table are hardened and ground
  • Turcite coated Y axis for wear resistance
  • Double clamps on all square slide ways
  • Motorized overarm with a 5.5 Hp motor
  • Horizontal & vertical manual drawbars
  • Automatic coolant system and coolant pump
  • Tool box and service tools
  • Standard 230 or 460 3 Phase (other voltage require a transformer or special order)

Optional Accessories:

2500UM10     ISO50 SPDL In Lieu Of ISO40 Horizontal SPDL $1,730.00
2500UM11     CE Electrics w/Table Guard $2,260.00
2500UM12     EMC Filter 40A x 3 Hp $475.00
2500UM13     Larger Table 72.8” x 13.7” $4,405.00
2500UM14     Horizontal Spindle Motor 10 Hp in Lieu Of 7.5 Hp $1,285.00
2500UM15     CSA Electrics Upgrade (non-certified) $2,315.00
2500UM16     Chip Tray $625.00
2500UM17     Auto Lube $580.00
2500UM18     Work Light $310.00
2500UM19     Clamping Kit $375.00
2500UM20     8” Hydraulic Clamping Vise $2,415.00
2500UM21     6” Hydraulic Clamping Vise $1,440.00
2500UM22     8” Power/Milling Vise $1,330.00
2500UM23     6” Power Vise $830.00
2500UM24     Break MTR w/Vert. 5.5 Hp / Horiz. 7.5 Hp $2,035.00
2500UM25     Break MTR w/Vert. 5.5 Hp / Horiz. 10 Hp $2,395.00
2500UM28     ISO 50 Pneumatic Power Drawbar (horz or vert) $2,875.00
2500UM29     ISO 40 Pneumatic Power Drawbar (horz or vert) $1,780.00
2500UM30     Auto Feed for Overarm POA
2500UM31     Ballscrew on X Axis for 59” Table (factory installed) $2,870.00
2500UM32     Ballscrew on X Axis for 72.8” Table (factory installed) $3,130.00
2500UM33     Ballscrew on Y Axis (factory installed) $1,485.00
2500UM34     Universal Dividing Head BS-2 w/6” 3-Jaw Chuck $3,140.00
2500UM40     Electronic Variable Speed onVertical SPDL 2500UM & M (factory installed) POA
DRO Standard Table  
AR20-4816200M       3 Axis w/Knee Acu-Rite DRO $3,515.00
NW20-4816DP700     3 Axis w/Knee Newall DRO $3,925.00
FG20-4816-PKMC    3 Axis w/Knee Fagor DRO $3,515.00


About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/