Description
59″ x 14″ New Clausing Vertical and Horizontal Mill Model 2500QM Specifications:
| Table | |
| Table area | 59″ x 13.7″ |
| Total load capacity | 1,540 lbs |
| No. of T-slots | 5 |
| Distance between T-slots | 2.36″ |
| T-slot size | 0.629″ |
| Table rotation | 45º right/left |
| Travel | |
| X automatic longitude | 45.27″ |
| Y automatic cross | 15.74″ |
| Z automatic knee | 19.68″ |
| Distance from spindle to overarm | 6.1″ |
| Spindle (Horizontal) | |
| Spindle taper | ISO-40 |
| Diameter of the main shaft nose | 3.5″-5.06″ |
| Milling arbor | 1″ |
| Number spindle speeds | 12 |
| Spindle speed range | 40 – 1800 rpm |
| Spindle motor HP | 7.5 |
| Spindle (Vertical) | |
| Spindle taper | ISO-40 |
| Quill diameter | 4.13″ |
| Quill travel | 5.9″ |
| Number spindle speeds | — |
| Spindle speed range | 70 – 3600 rpm |
| Spindle motor HP | 5 |
| Feeds | |
| Longitudinal & cross feeds | 0.393″ – 47.55″/min |
| Vertical feed | 0.196″ – 23.77″/min |
| Feed motor HP | 2.5 |
| Rapid Traverse | |
| Longitudinal & cross feeds | 47.55″/min |
| Vertical feeds | 23.77″/min |
| Cooling | |
| Cooling pump | 1/8 Hp |
| Weight | |
| Net weight | 7,040 lbs |
| Shipping weight | 7,770 lbs |
| Dimensions | |
| Shipping dimensions (L x W x H) | 70″ x 89″ x 88″ |
Standard Equipment:
- X, Y & Z Infinitely variable speed is achieved by an inverter through the gear box and controlled at the operator friendly control panel
- Rapid traverse on X, Y & Z axis
- Variable speed on X, Y & Z axis
- High quality meehanite casting for superior rigidity and wear resistance
- All gears and shafts are hardened and ground
- Large 13.7” x 59” (350 x 1500mm) table with 5 T-slots
- Table swivels 45° left and right
- Knee Mill style head on ram w/ manual or power feed moving quill
- Extra large square and dovetail square slide ways for greater accuracy
- 27mm ONG horizontal milling arbor & two (2) supports (“carrier bearing”)
- All slide ways and table are hardened and ground
- Turcite coated Y axis for wear resistance
- Double clamps on all square slide ways
- Motorized overarm with a 5.5 Hp motor
- Horizontal & vertical manual drawbars
- Automatic coolant system and coolant pump
- Tool box and service tools
- Standard 230 or 460 3 Phase (other voltage require a transformer or special order)
14″ x 59″ New Clausing Vertical and Horizontal Mill Model 2500QM Optional Accessories:
| 2500UM11 CE Electrics w/Table Guard | $2,315.00 |
| 2500UM12 EMC Filter 40A x 3 Hp | $755.00 |
| 2500UM13 Larger Table 72.8” x 13.7” | $4,575.00 |
| 2500UM14 Horizontal Spindle Motor 10 Hp in Lieu Of 7.5 Hp | $1,480.00 |
| 2500UM15 CSA Electrics Upgrade (non-certified) | $3,150..00 |
| 2500UM16 Chip Tray | $655.00 |
| 2500UM17 Auto Lube | $580.00 |
| 2500UM18 Work Light | $420.00 |
| 2500UM19 Clamping Kit | $375.00 |
| 2500UM20 8” Hydraulic Clamping Vise | $2,530.00 |
| 2500UM21 6” Hydraulic Clamping Vise | $1,525.00 |
| 2500UM22 8” Power/Milling Vise | $1,330.00 |
| 2500UM23 6” Power Vise | $855.00 |
| 2500UM24 Break MTR w/Vert. 5.5 Hp / Horiz. 7.5 Hp | $2,190.00 |
| 2500UM25 Break MTR w/Vert. 5.5 Hp / Horiz. 10 Hp | $2,550.00 |
| 2500UM29 ISO 40 Pneumatic Power Drawbar (horz or vert) | $1,755.00 |
| 2500UM30 Auto Feed for Overarm | POA |
| 2500UM31 Ballscrew on X Axis for 59” Table (factory installed) | $3,550.00 |
| 2500UM32 Ballscrew on X Axis for 72.8” Table (factory installed) | $3,300.00 |
| 2500UM33 Ballscrew on Y Axis (factory installed) | $1,580.00 |
| 2500UM34 Universal Dividing Head BS-2 w/6” 3-Jaw Chuck | $3,550.00 |
| 2500UM41 Electronic Variable Speed on Vertical SPDL 2500QM | POA |
| DRO Standard Table | |
| AR20-4816200M 3 Axis w/Knee Acu-Rite DRO (installed) | $4,115.00 |
| NW20-4816DP700 3 Axis w/Knee Newall DRO (installed) | $4,600.00 |
| FG20-4816-PKMC 3 Axis w/Knee Fagor DRO (installed) | $4,115.00 |
| DRO Large Table | |
| AR20-6016200M 3 Axis w/Knee Acu-Rite DRO (installed) | $4,435.00 |
| NW20-6016DP700 3 Axis w/Knee Newall DRO (installed) | $4,925.00 |
| FG20-6016-PKMC 3 Axis w/Knee Fagor DRO (installed) | $4,435.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
