Description
6” x 18” New Clausing CNC Lathe Precision Model CT618CNC-6 tool room lathe is the NC upgrade from the CT618VS manual tool room lathe. It keeps the original machine’s durability and elegant exterior while automating it with servos and CNC control.
6” x 18” New Clausing CNC Lathe Precision Model CT618CNC-6 tool room lathe’s design allows you to use a tailstock and lathe center to perform shaft work quick and easy.
6” x 18” New Clausing CNC Lathe Precision Model CT618CNC-6 Specifications:
| Capacity | |
| Maximum swing | 14.9” |
| Maximum turning diameter | 6” |
| Swing over cross slide | 5.9” |
| Center distance | 18” |
| Bar stock diameter | 1.06” |
| Chuck diameter | 6″ |
| Headstock | |
| Spindle nose diameter | 2.185″ |
| Spindle nose I.D./O.D. | 5C (10º) / 4º taper |
| Inverter spindle motor | 3 Hp |
| Spindle speeds (variable 3 Hp) | 50-4000 RPM |
| Optional inverter spindle motor | 5 Hp |
| Spindle speeds (optional variable 5 Hp) | 50-6000 RPM |
| Hole through spindle | 1-1/4″ |
| Bar stock diameter (5C collet) | 1-1/16″ |
| Carriage | |
| Maximum X axis travel | 8.66″ |
| Maximum Z axis travel | 13.38″ |
| Rapid travel | 787 in/min |
| X/Z axis servo motor | 750W |
| Tailstock | |
| Tailstock taper | 2MT |
| Tailstock quill travel | 3.74″ |
| Dimensions | |
| Weight (approx.) | 2,640 lbs |
| Machine (L x W x H) | 81″ x 40″ x 65″ |
| Shipping weight (approx.) | 2,866 lbs |
| Shipping (L x W x H) | 90″ x 48″ x 78″ |
6” x 18” New Clausing CNC Lathe Precision Model CT618CNC-6 Features:
- Hardened and Ground alloy steel bed ways resist wear.
- Turcite-B sideway bearing surface between carriage and bed for exceptional wear resistance.
- Fanuc Oi-MATE TD CNC controller for easy use.
-
Powerful 3HP
spindle motor w/Yaskawa current vector inverter drive for improved torque response at low end
- Spindle mounted on high precision preloaded angular contact ball bearings.
- Precision Ground X, Z ball screws for accuracy fully guarded for protection.
- AC Servo Motors on X, Z axes for reliable continued service.
- Z Axis ball screw directly coupled to the AC servo motor minimizes backlash.
- Fast lever collet chucking.
6” x 18” New Clausing CNC Lathe Precision Model CT618CNC-6 Fanuc OI-MATE TD Control Features:
- 2″ LCD Display
- Manual Guide Oi
- Serial Encoder Interface
- Fine Acceleration & Deceleration Control
- Inch Metric Conversion
- Stored Stock Limit
- Mirror Image
- Chamfering on/off
- Backlash Compensation for Each Rapid Traverse and Cutting Feed
- Stored Pitch Error Compensation
- DNC and MDI Operation
- Program and Sequence Number Search
- Program Restart
- Manual Intervention and Return
- Manual Reference Position Return
- MPG Handles
- Feed Rate and Jog Override
- Absolute/incremental programming in the same block
- Programmable increments: 0.0001″ min., 999.9999″ max.
- Thread cutting leads: 0.00001″ min., 1.0″ max.
- Variable Lead Threading/Threading Retract
- Diameter/Radius Programming (x-axis)
- Multiple part program storage (400 programs)
- Constant surface speed/direct rpm programming
- Automatic Coordinate System Setting
- Two axes linear and circular interpolation
- Direct Drawing Dimension Programming
- Custom Macro B/Sub-Program Call
- Tool geometry/wear offsets 64
- Tool life management
- Run hour, parts counter
- Automatic reference zero return G28
- Reference position return check G27
- 2nd, 3rd, 4th reference position return
- Work coordinate system G52-G59
6” x 18” New Clausing CNC Lathe Precision Model CT618CNC-6 Equipment:
- 50-4000 RPM spindle
- 3 Hp spindle motor w/ interverter
- X, Z precision ball screws
- MPG handle for manual axis movement
- Work light
- Tailstock #2MT taper
- Coolant system w/ 1/4 Hp coolant pump
- CE electrics
- Machine standard voltage 230/3/60 (other voltages require a transformer)
- Manuals and service tools
Optional Equipment:
| CTL-001 Transformer for 460/3/60 voltage 3Hp | $435.00 |
| CTL-001B Transformer for 460/3/60 voltage 5Hp | $435.00 |
| CTL-01B CSA electrics for Canada (non-certified) | $945.00 |
| CTL-002 5C step chuck 2″ regular depth cap. (requires CTL-002A) | $230.00 |
| CTL-003 5C step chuck 3″ regular depth cap. (requires CTL-003A) | $275.00 |
| CTL-004 5C step chuck 4″ regular depth cap. (requires CTL-004A) | $315.00 |
| CTL-005 5C step chuck 5″ regular depth cap. (requires CTL-005A) | $360.00 |
| CTL-006 5C step chuck 6″ regular depth cap. (requires CTL-006A) | $395.00 |
| CTL-002A 5C step chuck closer 2″ regular depth cap. – taper for CTL-002 | $170.00 |
| CTL-003A 5C step chuck closer 3″ regular depth cap. – taper for CTL-003 | $185.00 |
| CTL-004A 5C step chuck closer 4″ regular depth cap. – taper for CTL-004 | $200.00 |
| CTL-005A 5C step chuck closer 5″ regular depth cap. – taper for CTL-005 | $230.00 |
| CTL-006A 5C step chuck closer 6″ regular depth cap. – taper for CTL-006 | $235.00 |
| CTL-002B 5C step chuck 2″ extra depth cap. (requires CTL-002C) | $245.00 |
| CTL-003B 5C step chuck 3″ extra depth cap. (requires CTL-003C) | $295.00 |
| CTL-004B 5C step chuck 4″ extra depth cap. (requires CTL-004C) | $335.00 |
| CTL-005B 5C step chuck 5″ extra depth cap. (requires CTL-005C) | $375.00 |
| CTL-006B 5C step chuck 6″ extra depth cap. (requires CTL-006C) | $410.00 |
| CTL-002C 5C step chuck closer 2″ extra depth cap. – taper for CTL-002B | $190.00 |
| CTL-003C 5C step chuck closer 3″ extra depth cap. – taper for CTL-003B | $205.00 |
| CTL-004C 5C step chuck closer 4″ extra depth cap. – taper for CTL-004B | $220.00 |
| CTL-005C 5C step chuck closer 5″ extra depth cap. – taper for CTL-005B | $245.00 |
| CTL-006C 5C step chuck closer 6″ extra depth cap. – taper for CTL-006B | $275.00 |
| CTL-007 5″ 3-jaw chuck & CTL-023 | $885.00 |
| CTL-007A 5″ 3-jaw chuck & CTL-023 heavy duty | $1,170.00 |
| CTL-008 6″ 4-jaw chuck & CTL-023 | $1,085.00 |
| CTL-009 6″ 3-jaw chuck & CTL-023 | $1,125.00 |
| CTL-009A 6″ 3-jaw chuck & CTL-023 heavy duty | $1,200.00 |
| CTL-010 6″ 6-jaw chuck & CTL-023 | $1,400.00 |
| CTL-012 Threaded positive stops (solid stop) | $70.00 |
| CTL-013 Threaded positive stops (ejector stop) | $85.00 |
| CTL-014 Threaded positive stops (long stop) | $110.00 |
| CTL-015 Universal collet stop | $140.00 |
| CTL-016 Plug chuck | $70.00 |
| CTL-017 5C collet fixture plate (3-3/8″ dia.) | $175.00 |
| CTL-018 5C collet fixture plate (4-3/8″ dia.) | $190.00 |
| CTL-019 3″ spindle nose fixture plates (taper) | $175.00 |
| CTL-020 5″ spindle nose fixture plates (taper) | $205.00 |
| CTL-021 8-7/8″ spindle nose fixture plate (taper) | $310.00 |
| CTL-022 7″ slotted and taper face plate (taper) | $435.00 |
| CTL-023 Fixture plate (taper) | $260.00 |
| CTL-024 Angle plate | $150.00 |
| CTL-025 5C headstock center for drive plate | $110.00 |
| CTL-026 Drive plate | $140.00 |
| CTL-027 Drive dog | $150.00 |
| CTL-028 Chuck mounting plate for CTL-029 | $290.00 |
| CTL-029 Fine turning chuck (requires CTL-028) | $1,450.00 |
| CTL-030 Expanding collet pads | $770.00 |
| CTL-031 Soft jaws | $100.00 |
| CTL-036 Knurling holder .314″ (no tools pick 036B, C, or D) | $220.00 |
| CTL-036A Knurling holder .472″ (no tools pick 036B, C, or D) | $220.00 |
| CTL-036B Knurling tool – cross 45deg (requires CTL-036 or 036A) | $190.00 |
| CTL-036C Knurling tool – diamond 30deg (requires CTL-036 or 036A) | $200.00 |
| CTL-036D Knurling tool – stripe (requires CTL-036 or 036A) | $140.00 |
| CTL-037 Quick change tool post European style (no holders pick below) | $700.00 |
| CTL-038 Turning & facing holder for CTL-037 | $295.00 |
| CTL-039 Drilling & boring bar holder for CTL-037 | $345.00 |
| CTL-040A Tool setting gauge | $100.00 |
| CTL-043 Steady rest | $885.00 |
| CTL-044 Follower rest | $560.00 |
| CTL-050 Four station turret | $1,100.00 |
| CTL-051 Vertical cut-off slide | $1,140.00 |
| CTL-052 Male dead center | $100.00 |
| CTL-053 Live center | $195.00 |
| CTL-054 13 – MT#2 drill chuck | $160.00 |
| CTL-055 16 – MT#2 drill chuck | $205.00 |
| CTL-056 19 – MT#2 drill chuck | $365.00 |
| CTL-058 5C imperial collet EA (sizes 1/16 – 7/8 state sizes desired) | $75.00 |
| CTL-058-SET 5C imperial collet set 1/8 to 7/8 by 1/8 (7 pcs) | $450.00 |
| CTL-058M 5C metric collet EA (sizes 1-27mm state sizes desired) | $75.00 |
| CTL-100 Single tool holder | $80.00 |
| CTL-100A Double tool holder | $95.00 |
| CTL-100B Triple tool holder | $115.00 |
| CTL-105 Boring tool holder – R | $130.00 |
| CTL-105A Boring tool holder – L | $130.00 |
| CTL-105B Boring tool holder – A | $130.00 |
| CTL-110 Drill and shank tool holder | $130.00 |
| CTL-115 Adjustable tool holder | $135.00 |
| CTL-130 3/4″ square shank tool holder RH | $85.00 |
| CTL-130A 3/4″ square shank tool holder LH | $85.00 |
| CTL-135 1″ square shank tool holder RH | $95.00 |
| CTL-135A 1″ square shank tool holder LH | $95.00 |
| CTL-140 Quick change adjustable holder | $215.00 |
| CTL-145 Extension tool holders – 48 | $100.00 |
| CTL-145A Extension tool holders – 49 | $115.00 |
| CTL-145B Extension tool holders – 50 | $130.00 |
| CTL-145C Extension tool holders – 51 | $140.00 |
| CTL-150 Adjustable holder | $100.00 |
| CTL-155 16C collet type M3, 4, 5, 6, 8,10, 12 set | $610.00 |
| CTL-160 Releasing tap holder 16C collet type | $340.00 |
| CTL-165 Knee tool | $175.00 |
| CTL-180 Centering and facing tool | $295.00 |
| CTL-185 Releasing tap holder | $375.00 |
| CTL-190 Releasing die nut holder | $375.00 |
| CTL-195 Tool holder extension | $100.00 |
| CTL-200 Adjustable rotary stops | $140.00 |
| CTL-205 Slide tool | $500.00 |
| CTL-220 ER20 collet chuck set w/ tools | $425.00 |
| CTL-255 408mm gang tool block | $675.00 |
| CTL-260 96mm gang tool block | $270.00 |
| CTL-265 48mm gang tool block | $230.00 |
| CTL-270 4″ hydraulic chuck | POR |
| CTL-275 Pneumatic chuck | POR |
| CTL-280 Precision diaphragm chuck | POR |
| CTL-285 Drill & shank tool holder for 3 tools | $300.00 |
| CTL-290 Drill & shank tool holder for 6 tools | $460.00 |
Clausing Warranty:
Clausing warrantees the machine for a period of one year from the date of shipment. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.