Description
6” x 18” New Clausing Lathe Precision Model CT618DT/5 Specifications:
| Spindle Capacity | |
| With chuck | 6” |
| With expanding collets | 3” |
| With round 5C collets | 1-1/16” |
| With hexagon 5C collets | 7/8” |
| With square 5C collets | 3/4” |
| With step chuck | 1-1/16″ – 6″ |
| Capacity | |
| Swing over bed | 11″ |
| Swing over carriage | 9″ |
| Swing over cross slide | 5.9″ |
| Center distance | 18″ |
| Headstock | |
| Spindle nose diameter | 2.185″ |
| Spindle nose I.D./O.D. | 5C (10º) / 4º taper |
| Spindle speeds (variable 3 Hp) | 50-4000 RPM |
| Optional inverter spindle motor | 5 Hp |
| Spindle speeds (optional variable 5 Hp) | 50-6000 RPM |
| Hole through spindle | 1-1/4″ |
| Bar stock diameter (5C collet) | 1-1/16″ |
| Carriage | |
| Cross slide travel | 5.9″ |
| Carriage power feed range (longitudinal) | .314 – 7 in/min |
| Cross slide power feed range (variable) | .196 – 4 in/min |
| Quick action compound slide travel | 0.098″ |
| Compound slide travel | 2.99″ |
| Tailstock | |
| Tailstock taper | 2MT |
| Tailstock quill travel | 3.7″ |
| Threading | |
| Range of threads English | 3.175 to 500 TPI |
| Range of threads Metric | .05 to 6.55mm |
| Coolant | |
| Coolant pump | 1/8 Hp |
| Speeds & Feeds | |
| Feed inverter | 1/2 Hp |
| Dimensions | |
| Net weight (approx.) | 2,200 lbs |
| Machine (L x W x H) | 73″ x 30″ x 67″ |
| Shipping weight (approx.) | 2,310 lbs |
| Shipping (L x W x H) | 81″ x 40″ x 78″ |
6” x 18” New Clausing Lathe Precision Model CT618DT/5 Features:
-
CT618DT toolroom lathe with Digital Threading Control replaces traditional threading gearboxes with microprocessor-controlled, servo-driven leadscrew, in the past when a machinist was faced with a workpiece that called for thread pitch not supported on a conventional lathe, he had to locate and order a custom gear set and take the time to swap out the gears in the gearbox. This is not economically justifiable unless the volume is large enough.
-
CT618DT toolroom lathe’s design eliminates this time-consuming workaround. With the new digital threading system, the user’s threading wishes can be easily and immediately realized. Type in the desired thread pitch on the numeric keypad on the touch screen LCD control panel and then start the threading cycle as on other conventional lathes.
-
CT618DT’s system controls and synchronizes main spindle rotation and Z-axis feed rate to produce a precise threading cycle for the given TPI or mm thread pitch. Besides being able to cut thread pitches not previously available on manual lathes, noise and vibration are significantly reduced because there are actually no more gears in the gearbox.
-
CT618DT already has a custom IC and an LCD panel to enable threading control, the next logical step is to integrate DRO functions for an all-in-one versatile machine. This has been done. DRO capabilities are built-in and come standard at no extra charge. This features linear scales on the X and Z axes from Mitutoyo.
-
CT618DT toolroom lathe – is ideal for super high precision lathe work on small parts (usually those that fit in 5C collets). Has compound cross slide and tailstock.
6” x 18” New Clausing Lathe Precision Model CT618DT/5 With Integrated DRO Functions:
- Flat panel LCD display shows spindle RPM and tool feed rate to let operator easily select best turning conditions.
- LCD displays electric current value to easily check for turning overload.
- Rapid retract function shortens threading cycle.
- Guaranteed Circular Accuracy to 50 millionths of an inch.
- Infinitely variable spindle speed from 50-4000 RPM.
- Full bearing carriage with Turcite-B coated slideway bearing material between carriage and bed.
- Fast lever collet chucking with one single movement.
- The spindle is mounted on high precision preloaded angular contact ball bearing eliminating radial and end play.
- Solid hardened and ground alloy tool steel bed.
- Powerful 3 Hp motor with current vector inverter drive increases low end torque.
- Machine Standard Voltage 230/3/60 (other voltages require a transformer)
Optional Equipment:
| CTL-001 Transformer for 460/3/60 voltage 3HP | $435.00 |
| CTL-001 Transformer for 460/3/60 voltage 5HP | $435.00 |
| CTL-01A CSA electrics for Canada w/Interlock Chuck Guard (replaces CE electrics) | $1,025.00 |
| CTL-002 5C step chuck 2″ regular depth cap. (requires CTL-002A) | $230.00 |
| CTL-003 5C step chuck 3″ regular depth cap. (requires CTL-003A) | $275.00 |
| CTL-004 5C step chuck 4″ regular depth cap. (requires CTL-004A) | $315.00 |
| CTL-005 5C step chuck 5″ regular depth cap. (requires CTL-005A) | $360.00 |
| CTL-006 5C step chuck 6″ regular depth cap. (requires CTL-006A) | $395.00 |
| CTL-002A 5C step chuck closer 2″ regular depth cap. – taper for CTL-002 | $170.00 |
| CTL-003A 5C step chuck closer 3″ regular depth cap. – taper for CTL-003 | $185.00 |
| CTL-004A 5C step chuck closer 4″ regular depth cap. – taper for CTL-004 | $200.00 |
| CTL-005A 5C step chuck closer 5″ regular depth cap. – taper for CTL-005 | $230.00 |
| CTL-006A 5C step chuck closer 6″ regular depth cap. – taper for CTL-006 | $235.00 |
| CTL-002B 5C step chuck 2″ extra depth cap. (requires CTL-002C) | $245.00 |
| CTL-003B 5C step chuck 3″ extra depth cap. (requires CTL-003C) | $295.00 |
| CTL-004B 5C step chuck 4″ extra depth cap. (requires CTL-004C) | $335.00 |
| CTL-005B 5C step chuck 5″ extra depth cap. (requires CTL-005C) | $375.00 |
| CTL-006B 5C step chuck 6″ extra depth cap. (requires CTL-006C) | $410.00 |
| CTL-002C 5C step chuck closer 2″ extra depth cap. – taper for CTL-002B | $190.00 |
| CTL-003C 5C step chuck closer 3″ extra depth cap. – taper for CTL-003B | $205.00 |
| CTL-004C 5C step chuck closer 4″ extra depth cap. – taper for CTL-004B | $220.00 |
| CTL-005C 5C step chuck closer 5″ extra depth cap. – taper for CTL-005B | $245.00 |
| CTL-006C 5C step chuck closer 6″ extra depth cap. – taper for CTL-006B | $275.00 |
| CTL-007 5″ 3-jaw chuck & CTL-023 | $885.00 |
| CTL-007A 5″ 3-jaw chuck & CTL-023 Heavy Duty | $1,170.00 |
| CTL-008 6″ 4-jaw chuck & CTL-023 | $1,085.00 |
| CTL-009 6″ 3-jaw chuck & CTL-023 | $1,125.00 |
| CTL-009A 6″ 3-jaw chuck & CTL-023 Heavy Duty | $1,300.00 |
| CTL-010 6″ 6-jaw chuck & CTL-023 | $1,400.00 |
| CTL-012 Threaded positive stops (solid stop) | $70.00 |
| CTL-013 Threaded positive stops (ejector stop) | $85.00 |
| CTL-014 Threaded positive stops (long stop) | $110.00 |
| CTL-015 Universal collet stop | $140.00 |
| CTL-016 Plug chuck | $70.00 |
| CTL-017 5C collet fixture plate (3-3/8″ dia.) | $175.00 |
| CTL-018 5C collet fixture plate (4-3/8″ dia.) | $190.00 |
| CTL-019 3″ spindle nose fixture plates (taper) | $175.00 |
| CTL-020 5″ spindle nose fixture plates (taper) | $205.00 |
| CTL-021 8-7/8″ spindle nose fixture plate (taper) | $310.00 |
| CTL-022 7″ slotted and taper face plate (taper) | $435.00 |
| CTL-023 Fixture plate (taper) | $260.00 |
| CTL-024 Angle plate | $150.00 |
| CTL-025 5C headstock center for drive plate | $110.00 |
| CTL-026 Drive plate | $140.00 |
| CTL-027 Drive dog | $150.00 |
| CTL-028 Chuck mounting plate for CTL-029 | $290.00 |
| CTL-029 Fine turning chuck (requires CTL-028) | $1,450.00 |
| CTL-030 Expanding collet pads | $770.00 |
| CTL-031 Soft jaws | $100.00 |
| CTL-032 6.5 drill chuck (requires CTL-120) | $95.00 |
| CTL-033 10 drill chuck (requires CTL-120A) | $100.00 |
| CTL-034 13 drill chuck (requires CTL-120B) | $135.00 |
| CTL-035 16 drill chuck (requires CTL-120C) | $160.00 |
| CTL-036 Knurling holder .314″ (no tools pick 036B, C, D) | $220.00 |
| CTL-036A Knurling holder .472″ (no tools pick 036B, C, or D) | $220.00 |
| CTL-036B Knurling tool – cross 45deg (requires CTL-036 or 036A) | $190.00 |
| CTL-036C Knurling tool – diamond 30deg (requires CTL-036 or 036A) | $200.00 |
| CTL-036D Knurling tool – stripe (requires CTL-036 or 036A) | $140.00 |
| CTL-037 Quick change tool post European style (no holders pick below) | $700.00 |
| CTL-038 Turning & facing holder for CTL-037 | $295.00 |
| CTL-039 Drilling & boring bar holder for CTL-037 | $345.00 |
| CTL-040B Tool setting gauge | $100.00 |
| CTL-041 Carriage length indicator (less indicator) | $115.00 |
| CTL-042 Indicator carriage stop (less indicator) | $130.00 |
| CTL-043 Steady rest | $885.00 |
| CTL-044 Follower rest | $560.00 |
| CTL-046 Taper turning attachment | $2,035.00 |
| CTL-047 Radius turning attachment | $2,610.00 |
| CTL-048 Rear tool holder slide assembly | $780.00 |
| CTL-049 Bed length indicator (less indicator) | $405.00 |
| CTL-050 Four station turret | $1,100.00 |
| CTL-051 Vertical cut-off slide | $1,140.00 |
| CTL-052 Male dead center | $100.00 |
| CTL-053 Live center | $195.00 |
| CTL-054 13 – MT#2 drill chuck | $160.00 |
| CTL-055 16 – MT#2 drill chuck | $205.00 |
| CTL-056 19 – MT#2 drill chuck | $365.00 |
| CTL-057 Electronic magnifier lamp | $465.00 |
| CTL-058 5C imperial collet EA (sizes 1/16 – 7/8 state sizes desired) | $80.00 |
| CTL–058-SET 5C imperial collet set 1/8 to 7/8 by 1/8 (7 pcs) | $450.00 |
| CTL-058M 5C metric collet EA (sizes 1-27mm state sizes desired) | $75.00 |
| CTL-059 Chip coolant shield | $1,335.00 |
| CTL-045A Six Station Turret | $4,655.00 |
| CTL-045-9 Adjustable holder (for 6 station turret) | $135.00 |
| CTL-045-10 16C Collets for CTL0045-11 (M, 4, 5, 6, 8, 10, 12) State size (for 6 station turret) | $125.00 ea |
| CTL-045-11 Releasing tap holder collet type uses CTL-045-10 | $340.00 |
| CTL-045-13 Centering and facing tool (for 6 station turret) | $325.00 |
| CTL-045-15 Releasing die nut holder (for 6 station turret) | $405.00 |
| CTL-045-16 Tool Holder extension (for 6 station turret) | $135.00 |
| CTL-045-17 Adjustable rotary stops (for 6 station turret) | $175.00 |
| CTL-045-18 Slide Tool (for 6 station turret) | $530.00 |
| CTL-045-19 Quick acting recessing tool (for 6 station turret) | $530.00 |
| CTL-120 1/4″ drill chuck adapter JT#1 CTL-032 (for 6 station turret) | $75.00 |
| CTL-120A 3/8″ drill chuck adapter JT#2 CTL-033 (for 6 station turret) | $75.00 |
| CTL-120B 1/2″ drill chuck adapter JT#3 CTL-034 (for 6 station turret) | $75.00 |
| CTL-120C 1/2″ drill chuck adapter JT#6 CTL-035 (for 6 station turret) | $75.00 |
Clausing Warranty:
Clausing warrantees the machine for a period of one year from the date of shipment. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.