Description
9″ x 49″ New Bridgeport CNC Vertical Milling Machine Model BPS1R08AR 2 Axis
Now a Bridgeport Mill with 2 or 3 axis CNC milling capabilities in stalled but the factory! Announcing the new Bridgeport BPS1CNC Series w/Mechanical Sheave Pulley CNC Vertical Milling Machine with ACU-RITE MILL PWR G2 – 2 or 3 Axis CNC Control for sale at Worldwide Machine Tool. This machine will be arriving in September call Worldwide Machine Tool now to have a machine on order to receive one of the first CNC Bridgeport Knee mills.
9″ x 49″ New Bridgeport CNC Vertical Milling Machine Specifications.
|
Table & Ways |
Table Size |
9” x 49” |
|
Table Height Above Floor (max) |
47.25” |
|
|
Table Load |
750lbs. |
|
|
No. of T-slots |
3 |
|
|
T-slot Width |
5/8” |
|
|
T-slot Center Distance |
2.5” |
|
|
Table Ways |
Dovetail |
|
|
Knee Ways |
Dovetail |
|
|
Column Ways |
Dovetail |
|
|
Travels |
X Longitudinal Table (w/o pwr feed) |
36” |
|
X Longitudinal Table (w/pwr feed) |
33” |
|
|
Y Cross |
12” |
|
|
Knee |
16” |
|
|
Ram |
12” |
|
|
Throat Distance (min) |
6.75” |
|
|
Throat Distance (max) |
18.75” |
|
|
Table to Nose Gauge Line (min/max) |
2.5” / 18.25” |
|
|
Motors & Spindle |
Spindle Motor (duty cycle/continuous) |
3 Hp / 2Hp |
|
Amp. Draw 208v. |
7 |
|
|
Amp. Draw 230v. |
7 |
|
|
Amp. Draw 460v. |
5 |
|
|
Speed Range High Range |
500-4200 RPM |
|
|
Speed Range Low Range |
60-500 RPM |
|
|
Main Spindle Taper |
R8 |
|
|
Spindle Travel |
5” |
|
|
Quill Feed (in/rev.) 2 Axis System |
.0015/.003/.006 |
|
|
Quill Feed 3 Axis System |
0-100 ipm |
|
|
Quill Diameter |
3.375” |
|
|
Capacities |
Power Quill Feed |
3/8” |
|
Milling Capacity (mild steel) |
2 CI/in |
|
|
Boring Range (mild steel) |
6” dia |
|
|
Spindle Diameter |
1.875” |
|
|
Feed Rate Range (X,Y) |
0-100 ipm |
|
|
Minimum Increment |
0.0001” |
|
|
Construction & Weight |
Floor Area |
7 x 10 ft |
|
Height |
87” |
|
|
Net Weight |
1930 lbs |
|
|
Shipping Weight |
2075 lbs |
|
|
Input Power |
208/230/240 Volt |
|
|
|
3 Phase, 50/60 hz |
|
|
|
4KVA |
|
|
|
|
9″ x 49″ New Bridgeport CNC Vertical Milling Machine
- Flexible Operating Modes: manual operation with DRO, semi-automatic operation, and two or three axes full CNC operation.
- Hardened and Scraped X, Y, and Knee ways for superior accuracy and wear.
- Scraped Gibs applied to X, Y, and Knee ways for accurate alignment.
- Ground T-Slots provides quick set-ups for the operator using a quality reference edge for positioning workpiece or fixtures.
- Variable Speed Spindle achieving more accurate surface speeds for enhanced tool life.
- Spindle Brake manually operated.
- ABEC 7/CP4 Spindle Bearings increasing spindle speeds and accuracy for close tolerance machining.
- Chromed and Ground Quill giving the quill wear resistance with close tolerances between the quill and housing.
- 3/2 hp Spindle Motor for exceptional machining power.(3Hp 30 Min / 2Hp Continuous
- One Shot Lubrication maintains proper lubrication to all critical machine components.
- Optional Built in Coolant System w/pump, switch, and flexible coolant nozzle giving the operator full control over tool cooling.
- ACU-RITE Mill Power G2 Control easy to program conversational steps, gives this machine full CNC capabilities, at half the price of VMC’s.
- Hard Key Milling Functions provide quick and easy selection of routine functions (line, arcs, rectangles, circles, etc.)
- Part View Graphic provides for immediate viewing of part on 12.1” LCD screen.
- Closed Loop Feed Back using ACU-RITE precision glass scales with 2um/.0001 resolution.
- DC Axis Servo Motors provide accurate and powerful milling conditions.
- 2.5 GB Flash internal storage, USB / Ethernet gives the operator easy access for downloading and uploading programs.
- Precision Hardened and Ground Ballscrews for smooth positioning and accuracy.
Bridgeport Clausing CNC ACU-RITE MILL PWR G2 Control Specifications Hardware Features
- Precision Ground and Hardened Ball Screws
- Powerful DC Servo Motors Assemblies
- Closed Loop Feedback using ACU-RITE Precision Glass Scales with (1mm/.00004 Resolution)
- 1GHz Celeron Processor
- 12.1” Flat Panel, High Resolution Color LCD Display 3D Graphics
- Large Internal Part Program Storage Capacity 2.5GB Flash
- RS-232 Port for Downloading from an Offline Source
- USB/Ethernet for External Storage
- Remote Stop/Go Switch
- Modular Construction
- Maximum Table Feedrate of 100 IPM
- 2 & 3 axis Control/3-axis Readout
- Tree Style File Manager
- Menu-prompted, Conversational Programming
- Block Form Solid Model 3D Graphics (w/user override)
- G-Code Program (w/extended support plus G80 series drill cycles)
- Program Size Limit (9,999 steps)
- Auto Save Program
- Estimated Machining Time
- Position-Trac™/Find Home: Quickly find workpiece zero after power loss
- 3-D Tactile – Feel, Color Keypad
- Graphic View (line / 3D)
- ACU-RITE Precision Glass Scale:
- Better Accuracy
- Repeatability
- High Resolution
- Closed loop feedback
- Proven reliability
- Jog Control: One Axis or two axes simultaneously
- Remote Stop/Go Switch: with hand-held switch
- Travel Limits: With software not costly switches
- Engrave: Alphanumeric references into parts
- Tool Offset Compensation
- 99 Multiple Datum’s (fixture offsets)
- Tool Library
- Hard Key Milling Functions, Select routine functions (lines, arcs, rectangles, circles, etc.)
- Bolthole Calculations:
Calculate Full & Partial Circles - Linear Row/Column
- Rectangle frame
- Rectangle array
- Mirror/Repeat/Rotate
- Custom Pocket and Islands (ramp feed and optimized path)
- Skew : Save Time Aligning Parts
- Bend
- Explode
- Feed Rate Override
- DXF File Input
- Teach Position
- Edit Capabilities
- Reference Tables
- Math Functions: Standard/Trigonometry/Geometry/rpm
9″ x 49″ New Bridgeport CNC Vertical Milling Machine optional accessories.
| BPS8408 Air Power Draw Bar R8 (US MFG) | $1,485.00 |
| BPS001 Coolant Chip Pan | $570.00 |
| BPS-ENCOL Enclosed Base Coolant System w/On-Off Switch | $700.00 |
| BPS040 4” Column Riser Block Series 1 | $640.00 |
| BPS041 6” Column Riser Block Series 1 | $690.00 |
| BPS042 8” Column Riser Block Series 1 | $750.00 |
| BPSK140 Knee Servo Feed (USA MFG) | $1,955.00 |
| 2VS020-1 R8 Milling Chuck Kit w/11 ER Collets | $690.00 |
| Z384-SET-1 R8 Metric Set 2mm by 1mm, 19 Collets | $1,030.00 |
| Z384-SET-6 R8 Inch Collet Set 1/8 to 7/8 by 1/16ths, 13 Collets | $275.00 |
| Z384-SET-7 R8 Inch Collet Set 1/8 to ¾ by 1/8ths, 6 Collets | $150.00 |
| FV-9031G R8 to J2 Arbor for FV-9030G | $170.00 |
| FV-9033G R8 to J6 Arbor for FV-9032G | $170.00 |
| FV-9041G 12pc. R8 Collet Rack | $60.00 |
| FV9050G ½” R8 Shell Mill Holder | $100.00 |
| FV-9051G ¾” R8 Shell Mill Holder | $150.00 |
| FV-9052G 1” R8 Shell Mill Holder | $100.00 |
| FV-9080G R8 End Mill Adapter Set 3/16-1 ¼ (8 pcs.) | $320.00 |
| 2VS002A Central 110v Wiring Point w/6 Plugs & 8’ Power Cord | $265.00 |
| 2VS010 52 Piece Clamping Kit | $195.00 |
| FV-9010G Kurt 6” Vise Only | $1,025.00 |
| FV-9011G Kurt 6” Swivel Base for FV-9010G | $730.00 |
| FV-9012G Vise Step Key Kit 11/16 x 5/8 (set of 2) | $95.00 |
| FV-9030G ½” Keyless Drill Chuck | $230.00 |
| FV-9032G 1/8” to 5/8” Keyless Drill Chuck | $240.00 |
| FV-9070L LED Work Light w/3Pin 110V Plug | $215.00 |
| CS-9062 Coolant Mist System 1 Gal | $1,020.00 |
Note: Pricing is subject to change based on manufacturer. Request a quote for current pricing and availability. Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
Download the Bridgeport milling machine installation, operation and parts manual.
The operation installation and parts manual includes the safety requirements and setup for a new Bridgeport milling machine. The parts diagrams and instructions help you setup and maintain a new Bridgeport mill. Call Worldwide Machine Tool at 614-255-9000 for help.
Click to download a Bridgeport Mill Parts and Maintenance Manual
Click and Download the Bridgeport Mill lifting instructions.
Click and Download the Bridgeport Mill Safety and Data Sheet.
Click and Download the Bridgeport Mill Older Parts Sheet.
Bridgeport Dimensions and Shop Floor Foot Print. 5′ Front to back , 87″ Tall, 68″ Tall with head tilted Down.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
