New Bridgeport Mill Series 1 For Sale In Stock. Worldwide Machine Tool in Columbus Ohio offers new New Bridgeport mill models with prices online.

9″ x 49″ New Bridgeport Mill Series 1 Standard Package 6

The Bridgeport Series I Standard Mill Standard Package 6 is the original milling, drilling and boring machine.The Bridgeport Series I Knee Mill is the most popular mill ever made with over 370,000 machines built over the past 70-plus years.

  • Chrome Plated Ways
  • One Shot Lube
  • Variable Speed Drive
  • Back Gear For Heavy Milling
  • Draw Bar
  • Inch Screws and Dials, Erickson # 30 Quick Change Spindle, Chrome Ways and Gibs, One-Shot Lube, X & Y Axis Servo Power Feed (Y axis travel stop is not available for this model)

FULL ONE-YEAR PARTS WARRANTY

Terms: Check with Order

Digital Readouts

Select One

Servo Power Feeds

Align Power Feeds

Optional Accessories

Description

9″ x 49″ New Bridgeport Mill Series 1 Standard Package 6

The New Bridgeport Mill Standard Package 6 is configured with the following.
Inch Screws and Dials, (Special Order Only Erickson #30 Quick Change Spindle), Chrome Ways and Gibs, One-Shot Lube, X & Y Axis Servo Power Feed (Y axis travel stop is not available for this model) available in 230V 60Hz, 208V 60Hz or 460V 60Hz.
NOTE: THESE ARE SPECIAL ORDER BRIDGEPORTS – If you are looking for the STANDARD new Bridgeport mill for sale standard package 1 click here.

Built the Bridgeport Way
The long-term reliability of a Series I mill is the result of its design features, the quality of its components, and the craftsmanship of its hand-scraped ways and precision ground fits. Every Hardinge-Bridgeport knee mill is built to last as if you would build it for yourself. That’s why the resale value of a Bridgeport mill remains consistently high. The “bargain” imitators can’t say that. Our competitive prices are a result of our higher volume­not from building a cheaper machine. Rigidity starts with the main frame components of a machine, and for this reason, the strength and damping qualities of gray cast iron was chosen.

Patented 2J head
The unique and patented air cooling system of the “2j” head ensures that any heat buildup in the spindle bearings, belt or quill area is kept to an absolute minimum. This is achieved by air being drawn into the belt housing and past the spindle bearings by the rotation of the drive belt It is then exhausted out of the head assembly at the top of the casting.

Distortion and inaccuracy due to excessive heat rise is kept to a
minimum by maintaining the operating temperature within 20 degrees
fahrenheit of ambient temperature. This also results in increased belt and bearing life, as well as more consistent accuracy. Also, with no external cooling fans, vibration is reduced and the ongoing maintenance or threat
of a fan failure is eliminated. Fans also frequently require a step-down transformer if the machine is wired for power greater than 110 Volts.

Series I One-shot lubrication
Adequate lubrication ensures a long accurate life for the machine. It also reduces maintenance and makes the machine more sensitive and easier for the operator to use. A metered, centralized system lubricates all of the ways and screw assemblies of the machine. Operation of the system by a single lever saves the operator time and makes it easy to always provide the correct amount of oil, predetermined by a series of metering valves built into the system. Many competitive systems do not meter lubrication, which allows the oil to flow to the point of least resistance.Thus one sliding member may receive more oil than another; possibly causing excessive wear to the area that is not getting properly lubricated. An optional Automatic Lubrication System is also
available.

Hand-scraped ways
All alignment ways and gibs are completely hand scraped to within tenths of a thousandth.This ensures optimum machine geometry, rigidity and accuracy.

9″ x 49″ New Bridgeport Mill Series 1 Standard Package 6 Series 1 specifications.

Table Size 9″ x 49″
Table travel (X-Axis) 36″ (914 mm) with Power Feed
Table travel (X-Axis) 31″ (787 mm) without Power Feed
Saddle Travel (Y-Axis) 12″ (305 mm)
Quill Travel 5″ (127 mm)
Knee Travel (Z-Axis) 16″ (406 mm)
Ram Travel 12″ (305 mm)
Throat Distance (Min.) 6.75″ (171 mm)
Throat Distance (Max.) 18.75″ (476 mm)
Spindle (2J Head)  
Power Rating 30 min. Duty Cycle 3 HP (2.2 kW)
Power Rating Continuous 2 HP (1.5 kW)
Tooling R-8 Collets
Drilling Capacity  
Power Quill Feed 3 3/8″ (9.5 mm)
Manual Drilling Capacity 2 CI/min
Boring Range 6″ dia. (152 mm)
Spindle Diameter 1.875″ (48 mm)
Quill Diameter 3.375″ (86 mm)
Speed Range  
High (Infinitely Variable) 500 – 4,200 RPM @ 60 Hz
Low 60 – 500 RPM @ 60 Hz
Power Quill Feed 0.0015″/rev (0.038 mm)
Manual Adjust 0.003″/rev (0.076 mm)
Manual Adjust 0.006″/rev (0.152 mm)
Worktable  
Standard 49″ x 9″ (1,245 x 299 mm)
T Slot center distance 3 @ 2.5″ (64 mm)
T-Slot Size 0.625″ (16 mm)
Height Above Floor (Max.) 47.25″ (1,200 mm)
Weight of Workpiece (Max.) 750 lb (340 kg)
Machine Size  
Height 87″ (2.21 m)
Weight 1,930 lb (875 kg)
Weight (Shipping) 2,075 lb (941 kg)
Floor Space 7′ x 10′ (2.13 x 3.0mm)
#BPKMQCXY  

Features of a New Bridgeport Milling Machine Series 1.

  • Chrome Plated Ways
  • One Shot Lube
  • Variable Speed Drive
  • Back Gear For Heavy Milling
  • Draw Bar

New Bridgeport Mill unboxing video (Full demonstration)

New Bridgeport Mill Video unboxing Full Demonstration

9″ x 49″ New Bridgeport Mill Series 1 Standard Package 6 Optional Accessories.

Digital Readouts  
Newall : X and Y – Installed $3,075
Newall : X, Y, and Z – Installed $4,010
Acu-Rite : X and Y – Installed $3,299
Acu-Rite : X,Y, and Z – Installed $4,211
Power Feeds  
Servo : X Axis Power Feed – Installed $1,300
Servo : Y Axis Power Feed – Installed $1,300
Servo : Z Axis Power Feed – Installed $1,300
Align : X Axis Power Feed – Installed $950
Align : Y Axis Power Feed – Installed $950
Align : Z Axis Power Feed – Installed $950
Accessories  
6” Kurt Vise $705
Swivel Base for Machine Vise $460
Work Light $433
R-8 Collet Tray – Installed $259
Power Drawbar for R-8 Spindle $1,725
Power Drawbar for R-8 Spindle with NFPA electrics $1,725
Accu Lube Advantage Applicator $1,550
R-8 Collets Set – 11 collets, 1/8” to ¾” (in 1/16” increments) $540
R-8 Collets Set – 12 collets 1/16” to ¾” (in 1/16” increments) $583
#3-2J Right-angle attachment (accommodates R-8 collets) $2,180
Vise Step Key Kit $41
Work Light (Twist-Loc Plug, used with NFPA Electrics) $433
NFPA Electrics (208-24-460V, 60 Hz) – Installed $9,970
Operation and Maintenance Manuals $61
Export Only Crating $555

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/