Description
9″ x 49″ New Clausing Knee Mill Model 2VS30 Specifications:
Table & Ways | |
Table size | 9″ x 49″ |
No. of T-slots | 3 |
T-slot width | 5/8″ |
T-slot center distance | 2.05″ |
Table ways | Dovetail |
Knee ways | Dovetail |
Column ways | Dovetail |
Travels | |
X longitudinal | 38.18″ |
Y cross | 14.17″ |
Knee | 13.97″ |
Ram | 18.50″ |
Motors & Spindle | |
Spindle motor R8 & 30 / 40 taper | 3 Hp/5 Hp Amp. Draw 208v: 7 Amp. Draw 230v: 7 Amp. Draw 460v: 5 |
Variable spindle speed rpm | Low range: 75-780 High range: 515-4350 |
Main spindle taper | R8 or NMTB30 or NMTB40 |
Spindle travel | 5″ |
Quill feed (in/rev.) | 0.0015/0.0031/0.006 |
Quill diameter | 3.38″ |
Construction & Weight | |
Column turret diameter | 14.96″ |
Knee width | 11.42″ |
Column bearing length | 16.54″ |
Saddle/table bearing length | 19.88″ |
Ram/turret bearing length | 16.14″ |
Ram length | 28.94″ |
Table load | 700 lbs. |
Net weight | 2,100 lbs. |
Height | 89″ |
Depth | 66″ |
Width | 99″ |
Table to spindle | 3.15″ – 17.12″ |
45º inward | 0 – 19.68″ |
Spindle ǿ to column | 4.53″ – 23.03″ |
45º outward | 6.89″ – 29.39″ |
Head tilt | 90º right & left |
Standard Equipment:
- Meehanite castings for superior rigidity and wear resistance
- Hardened & ground, X, Y & Z ways
- X/Y ways coated with Turcite B
- Column & knee ways covers
- T-slots are ground to provide reference edge for positioning your workplace
- Hardened & ground table surface
- Hardened & ground spindle
- Chromed & ground quill
- Chromed X, Y, & Z leadscrews
- Double nut leadscrew for backlash compensation
- ABEC 7/CP4 spindle bearings
- Coolant system w/pump & switch
- Flexible segmented coolant nozzle
- Chromed Y screw covers and one-piece wipers
- 7/16”-20 Imperial drawbar R8, or 1/2”-20 Imperial drawbar NMTB30
- 3 Hp AC motor
- Variable speed drive
- Articulating head for compound angles
- Worm gear angular positioning of head in two directions
- Lever-operated manual rapid quill movement
- Handwheel for fine quill feed
- Adjustable automatic feed disengagement for quill feed in both directions
- Micrometer depth stop
- Reversing switch for clockwise or counter clockwise operation
- R8 or NMTB 30
- Spindle brake (hand operated)
- One-shot lubrication
- Leveling bolts and pads
- Tool kit, test and accuracy chart
- Operations manual/parts list
- 2VS series standard 208/230 or 460 3 phase (other voltages require a transformer or special order)
- 2EVS series standard 230 volt 3 phase (other voltages require a transformer or special order)
Optional Accessories:
R8 Spindle Accessories Only | |
2VS020 R8 Milling Chuck Kit w/7 Collets | $710.00 |
2VS030P Horiz. Milling Attachment 3pc. Set (cannot use with power drawbar option) | $1,220.00 |
2VS031P R8 Rt. Angle Attachment (cannot use with power drawbar option) | $770.00 |
Z384-SET-1 R8 Metric Set 2mm by 1mm, 19 Collets | $365.00 |
Z384-SET-5 R8 Inch Collet Set 1/8 to 7/8 by 32nds, 25 Collets | $1,030.00 |
Z384-SET-6 R8 Inch Collet Set 1/8 to 7/8 by 1/16ths, 13 Collets | $275.00 |
Z384-SET-7 R8 Inch Collet Set 1/8 to ¾ by 1/8ths, 6 Collets | $150.00 |
FV-9031G R8 to J2 Arbor for FV-9030G | $170.00 |
FV-9033G R8 to J6 Arbor for FV-9032G | $170.00 |
FV-9041G 12pc. R8 Collet Rack | $45.00 |
FV9050G ½” R8 Shell Mill Holder | $100.00 |
FV-9051G ¾” R8 Shell Mill Holder | $100.00 |
FV-9052G 1” R8 Shell Mill Holder | $100.00 |
FV-9080G R8 End Mill Adapter Set 3/16-1 ¼ (8 pcs.) | $320.00 |
2VS8408 Air Power Draw Bar R8 (US MFG) (installed) | $1,300.00 |
NMTB30 Spindle Accessories Only | |
2VS021 NMTB30 Milling Chuck Kit w/7 Collets | $710.00 |
2VS030AP NMTB30 Horiz. Milling Attachment 3pc. Set | $1,220.00 |
2VS031AP NMTB30 Rt. Angle Attachment | $770.00 |
FV-9081G NMTB End Mill Adapter Set 3/16 – 1 (7 pcs) | $740.00 |
2VS8430 Air Power Draw Bar NMTB30 (US MFG) (installed) | $1,300.00 |
All Accessories | |
2VS001P Chip Tray | $670.00 |
2VS-RSG Rear Splash Guard Sides of Column | $1,240.00 |
2VS002 Full Electrics w/Disconnect Box & CNTL Box (factory) | $1,055.00 |
2VS002F Full Electrics w/Disconnect Box & CNL Box (field or stock machines) | $1,505.00 |
2VS002A Central 110v Wiring Point w/6 Plugs & 8’ Power Cord | $265.00 |
2VS010 52 Piece Clamping Kit | $195.00 |
2VS020A ¼” Milling Chuck Collet Only (2VS020, 21, 22) | $50.00 |
2VS020B 5/16” Milling Chuck Collet Only (2VS020, 21, 22) | $50.00 |
2VS020C 3/8” Milling Chuck Collet Only (2VS020, 21, 22) | $50.00 |
2VS020D ½” Milling Chuck Collet Only (2VS020, 21, 22) | $50.00 |
2VS020E 5/8” Milling Chuck Collet Only (2VS020, 21, 22) | $50.00 |
2VS020F ¾” Milling Chuck Collet Only (2VS020, 21, 22) | $50.00 |
2VS020G 1” Milling Chuck Collet Only (2VS020, 21, 22) | $50.00 |
2VS040P 4” Riser Block | $605.00 |
2VS041P 6” Riser Block | $690.00 |
2VS042P 8” Riser Block | $760.00 |
2VS045 X,Y Ball Screws I/O Lead Screws (factory installed) | $2,265.00 |
2VS045F X,Y Ball Screws (field or stock machine install) | $3,860.00 |
2VS050 Auto Lube Pump 110V | $370.00 |
2VSX150 X-Axis Servo Feed (USA MFG) | $1,415.00 |
2VSXA X-Axis Align Power Feed (Taiwan) | $1,040.00 |
2VSY150 Y Axis Servo Feed (USA MFG) (cannot be used with ballscrew option) | $1,740.00 |
2VSYA Y Axis Align Power (Taiwan) (cannot be used with ballscrew option) | $1,075.00 |
2VSK140 Knee Servo Feed (USA MFG) | $1,580.00 |
2VSKA Knee Align Power (Taiwan) | $1,075.00 |
FV-9010G Kurt 6” Vise Only | $775.00 |
FV-9011G Kurt 6” Swivel Base for FV-9010G | $525.00 |
FV-9012G Vise Step Key Kit 11/16 x 5/8 (set of 2) | $105.00 |
FV-9030G ½” Keyless Drill Chuck | $230.00 |
FV-9032G 1/8” to 5/8” Keyless Drill Chuck | $240.00 |
FV-9070L LED Work Light w/3Pin 110V Plug | $265.00 |
CS-9062 Coolant Mist System 1 Gal | $1,020.00 |
2VS-CE CE Electrics w/ Spindle Guard (factory order) | $1,245.00 |
2VS-CSA CSA Electrics Canadian Specifications (non-certified) | $560.00 |
2VS-BRKM Braking Motor In lieu of Standard Motor (factory inst) | $370.00 |
DRO Kits | |
AR14-40-100M 2VS 2 Axis 9” x 49” TBL Acu-Rite 100 DRO (installed) | $2,050.00 |
AR14-40-200M 2VS 2 Axis 9”x 49” TBL Acu-Rite 200 DRO (installed) | $2,395.00 |
AR14-40-300M 2VS 2 Axis 9” x 49” TBL Acu-Rite 300 DRO (installed) | $2,795.00 |
AR4-14-40-200M 2VS 3 Axis w/Spindle 9”x 49” TBL Acu-Rite 200 DRO (installed) | $3,045.00 |
AR4-14-40-300M 2VS 3 Axis w/Spindle 9”x 49” TBL Acu-Rite 300 DRO (installed) | $3,445.00 |
AR14-40-16-200M 2VS 3 Axis w/Knee 9”x 49” TBL Acu-Rite 200 DRO (installed) | $3,240.00 |
AR14-40-16-300M 2VS 3 Axis w/Knee 9”x 49” TBL Acu-Rite 300 DRO (installed) | $3,640.00 |
AR4-14-40-16300M 2VS 4 Axis w/Knee 9”x 49” TBL Acu-Rite 300 DRO (installed) | $4,315.00 |
NW16-36-DP700 2VS 2 Axis 9”x 49” TBL Newall DRO (installed) | $2,365.00 |
NW6-16-36-DP700 2VS 3 Axis w/Spindle 9”x 49” TBL Newall DRO (installed) | $3,140.00 |
NW16-16-36-DP700 2VS 3 Axis w/Knee 9”x 49” TBL Newall DRO (installed) | $3,140.00 |
FG14-40-PKMC 2VS 2 Axis 9”x 49” TBL Fagor DRO 40i (installed) | $2,795.00 |
FG14-40-PKM 2VS 2 Axis 9”x 49” TBL Fagor LED DRO 20i (installed) | $2,395.00 |
FG06-14-40-PKMC 2VS 3 Axis w/Spindle 9”x 49” TBL Fagor DRO 40i (installed) | $3,445.00 |
FG06-14-40-PKM 2VS 3 Axis w/Spdl 9”x 49” TBL Fagor LED DRO 20i (installed) | $3,045.00 |
FG16-14-40-PKMC 2VS 3 Axis w/Knee 9”x 49” TBL Fagor DRO 40i (installed) | $3,640.00 |
FG16-14-40-PKM 2VS 3 Ax w/Knee 9”x 49” TBL Fagor LED DRO 20i (installed) | $3,240.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/